Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Costa Mesa, CA
Gate installation in Costa Mesa usually means one of two jobs: replacing a rusted-out 1960s driveway gate on the west side, or matching an HOA spec on the Eastside. We handle both, plus the repair work that keeps existing gates swinging true. Wrought Gate Repair works exclusively on gates, manual or motorized, and we’ve served Costa Mesa since 2012. Call (833) 545-6817 for a free estimate on any gate project.
Why Costa Mesa Homes Are Different
Costa Mesa splits into two distinct gate markets. The west side, including the Mesa del Mar and Westside tracts in 92626 and 92627, is filled with single-story ranch homes from the 1950s and 1960s. Many still have their original driveway gates hanging on steel posts that have rusted through at the ground line after sixty years of sprinkler spray and coastal moisture. On the east side, 92628 has a very different landscape: newer townhomes and apartment communities where decorative metal and vinyl gates are governed by HOA design standards. An HOA gate replacement in Costa Mesa often requires matching the exact panel style, finish color, and post profile already used throughout the community. Then there’s the marine layer. Salt air drifts in from Newport Beach year-round, and it accelerates corrosion on hinges, latches, and opener arms faster than inland Orange County. Winter rains expose wood rot in older gates that looked fine in September. Any gate work here has to account for that coastal exposure or the repair won’t last.
Styles & brands we work with
Our Main Costa Mesa Services
Costa Mesa homeowners call us most about two things: a gate that won’t close properly, and an automated opener that quit responding. Here’s how each one works with us.
Gate Repair in Costa Mesa
Manual gate repair in Costa Mesa typically means a sagging welded frame, seized hinges, or a latch that no longer lines up after the post shifted. We see a lot of post-settlement failures in the older tracts, where the driveway slab has moved and the gate now drags on the concrete. Our repair crew cuts out rusted sections, re-hangs the gate on sleeved or replaced posts, and adjusts hardware so it latches on center. Full details on costs and turnaround are on our Gate Repair in Costa Mesa page.
Electric Gate Repair in Costa Mesa
Electric problems are the other half of our Costa Mesa call volume. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, so we’re not routing you to a brand-specific dealer. Salt air corrosion on control boards, misaligned safety sensors, and worn actuator arms are common here. Our Electric Gate Repair in Costa Mesa page covers diagnosis and repair in detail. When a repair isn’t practical, we quote a replacement fairly, never as a forced upsell.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Costa Mesa
Gate installation in Costa Mesa starts with the post, not the gate. In the west side tracts from the 1960s, original steel posts are frequently rusted through below grade and need sleeving or full replacement before anything new gets hung. On the Eastside, the job is about HOA compliance: the panel style, powder coat color, and setback must match the community’s approved standard. Coastal salt air means we specify hot-dip galvanized frames and stainless hardware on most installations here, regardless of the neighborhood. We only work on gates, and our Gate Installation service covers everything from a single manual driveway swing gate to a full automated entry with new posts, opener, and safety loop.
Automatic Gate Installation
Signs you need it
You’re getting out of the car to open and close the gate by hand, or an existing opener has failed and replacement parts are no longer made.
What it costs in Costa Mesa
Expect $2,500 to $8,000 for a complete automatic gate installation in Costa Mesa depending on gate size, opener type, and power-run distance.
How we do it
We survey the driveway slope and post condition, then install the gate with a matched opener, safety edges, and a wired or solar power source, programmed and tested on site.
Driveway Gate Installation
Signs you need it
The existing driveway gate is rusted through, sagging beyond adjustment, or was never the right width for today’s vehicles.
What it costs in Costa Mesa
Budget $1,200 to $4,500 for a new manual driveway gate in Costa Mesa including new posts and hardware.
How we do it
We remove the old gate and posts, set new posts in concrete at the correct depth, and hang a gate built to your driveway opening, with all hardware adjusted for a clean swing.
Sliding Gate Installation
Signs you need it
Your driveway has a steep grade or tight setback where a swing gate would clip a vehicle or the sidewalk.
What it costs in Costa Mesa
Sliding gate installation in Costa Mesa runs $3,000 to $9,000 depending on track length, gate weight, and automation.
How we do it
We pour or secure a level track foundation, mount the gate carriages and guide posts, then set the gate and tune the slide motion so it rolls without racking.
What Gate Installation Costs in Costa Mesa
| Item | Typical range in Costa Mesa |
|---|---|
| Manual driveway gate install | $1,200 – $4,500 |
| Automatic gate installation | $2,500 – $8,000 |
| Sliding gate installation | $3,000 – $9,000 |
Do you handle the power run and safety edges on automatic gates?
Yes. We run conduit and wiring from the panel to the opener, install required safety edges and photo sensors, and test the full system before we leave. The quote you approve covers all of it.
Will a new gate match my HOA’s design standards?
We ask for the HOA’s gate spec before ordering materials, and we build to that spec: panel style, powder coat color, latch type, and setback. If your community doesn’t have a written standard, we’ll match the existing gates around you.
Brands We Service in Costa Mesa
Costa Mesa gate openers run the full gamut: FAAC hydraulic rams on Eastside condominium gates, BFT swing arms on custom homes, Linear boards on older tract houses, and Viking operators on commercial lots. We keep common replacement boards, safety edges, and remote receivers in local stock. If a part isn’t on the truck, we tell you the realistic lead time before quoting. See our brands for details.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Costa Mesa, CA
| Service | Typical range in Costa Mesa |
|---|---|
| Manual driveway gate installation | $1,200 – $4,500 |
| Automatic gate installation | $2,500 – $8,000 |
| Sliding gate installation | $3,000 – $9,000 |
| Gate repair diagnostic visit | $60 – $120 |
| Manual gate repair | $160 – $700 |
| Gate opener repair | $170 – $890 |
Coastal corrosion and HOA compliance are the two big price drivers in Costa Mesa. We quote the full job before any work begins, and that quote is the price you pay unless you approve a change in writing.
Neighborhoods We Serve in Costa Mesa
We work throughout Costa Mesa, from the older west side tracts to the planned communities and commercial corridors on the Eastside. Typical response time for repair calls in Costa Mesa is one to two business days, with faster scheduling available for gates that won’t close and secure.
- Mesa del Mar
- Westside Costa Mesa
- Eastside Costa Mesa
- College Park
- Halecrest
Service Area – Cities Near Costa Mesa
Wrought Gate Repair covers all of Costa Mesa and the surrounding coastal and inland Orange County communities. We handle gate repair in Newport Beach, CA, Fountain Valley, CA, Huntington Beach, CA, and San Joaquin Hills, CA. If your gate is down and you need a specialist, one call covers it.
Serving Costa Mesa, CA — Our Local Coverage Area
We’re based in the Costa Mesa area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Costa Mesa
For a gate that won’t close or secure, we schedule emergency repair calls within one business day in most Costa Mesa neighborhoods. Call (833) 545-6817 and we’ll give you a real window, not a four-hour range.
Most single-family gate replacements don’t require a building permit, but HOA communities on the Eastside often have an architectural review process. We’ll match the spec and can provide drawings if your board needs them.
We’ve installed to HOA specs across Costa Mesa. If your board has an approved vendor list, ask if you can submit Wrought Gate Repair for review. We’re licensed, insured, and used to working within design standards.
Need a gate installed, repaired, or automated in Costa Mesa? Call (833) 545-6817 for a free estimate. We work exclusively on gates, and we’ll tell you straight what the job needs and what it costs before anything is ordered or cut.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Costa Mesa Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Maria Rodriguez"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Priya Mehta"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Jasmine Coleman