Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Brea, CA
Gate installation in Brea runs from about $1,200 for a basic single-swing driveway gate up to $8,000 or more for a long-span automatic sliding gate with full operator and safety package. Most Brea jobs we quote fall between $2,400 and $5,500 because the city’s housing stock is split: flat 1950s-70s tracts in 92821 where a straightforward replacement works, and sloped foothill lots in 92823 where the gate post has to be engineered for soil that dries, shifts, and settles between Santa Ana seasons. Call Wrought Gate Repair at (833) 545-6817 for a free on-site estimate.
Why Brea Homes Are Different
Brea is not one housing market. The original mid-century tracts around the 92821 corridor were built on flat, compacted ground, and many still have their original wrought-iron driveway gates, or replacements installed decades ago on heavy steel posts. Those gates fail in predictable ways: hinge wear, rust at the weld points, a gate leaf that drags after forty years of cycles.
The hillside and master-planned areas up in 92823 are a different animal. Those lots are graded, which means the soil under the gate posts was cut and filled, then compacted in dry conditions. Every hot summer the soil loses moisture, and every Santa Ana wind season the gate takes lateral load it was not quite plumbed for. The result is a pattern we see repeatedly on Brea foothill properties: the gate was hung true, and within two or three seasons it sags enough to bind against the track or drag on the hinge side. The fix is not always a new gate. Often it is re-setting the post in a deeper footing and re-hanging the existing leaf. But the diagnosis has to come from someone who has worked enough of these hillside jobs to spot the difference between gate wear and ground movement. That is the work we do every week in Brea.
Styles & brands we work with
Our Main Brea Services
Most Brea homeowners and property managers call us for one of two reasons, and both are covered by a single specialist team.
Gate Repair in Brea
We repair manual gates across Brea, from wrought-iron driveway gates in the mid-century tracts to steel side-yard gates on newer foothill homes. The most common calls are hinge failures, sagging leaves, rust at weld points, and latch or lock hardware that no longer aligns. On hillside lots we check post footings and slab movement before assuming the gate itself is the problem. Expect a straight diagnosis, a written price before work begins, and repairs done with parts matched to the original material wherever possible. Read more on our Gate Repair in Brea page.
Electric Gate Repair in Brea
For motorized gates, Brea’s climate and terrain create two recurring failures: operator strain from long daily cycles in HOAs and gated communities, and board or limit-switch burnout from wind load fighting the opener during Santa Ana events. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, so we rarely need to send a Brea customer to a brand dealer. Details are on our Electric Gate Repair in Brea page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Brea
Installing a new gate in Brea means matching the build to the lot. On flat 92821 properties we can usually set posts in standard footings and hang a gate the same way it was done in the 1960s. On graded 92823 hillsides we dig deeper, often into less-disturbed soil, and we size the post and footing for wind load plus dry-season ground movement. We install manual and automatic driveway gates, swing and sliding, in steel and wrought iron, and we handle the operator, safety edges, and power coordination for automated systems. Our Gate Installation work is quoted as a fixed price before any material is ordered.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is sagging past the point that re-hanging makes sense, the post is cracked or leaning, or the gate is too narrow for modern vehicles.
What it costs in Brea
Driveway gate installation in Brea typically runs $1,200 to $4,600 depending on width, material, and whether it is swing or sliding.
How we do it
We measure the opening and slope, dig and pour the post footings, set the posts, hang the gate, and align the latch and stops so it swings clean and stays square.
Sliding Gate Installation
Signs you need it
Your property has a short driveway apron or an uphill approach where a swing gate would hit the slope, or you want to close a wide opening without a center post.
What it costs in Brea
Sliding gate installation in Brea generally falls between $1,800 and $8,000, with long-span or automated slides at the upper end.
How we do it
We set the track and guide rollers on a level rail, hang the sliding leaf, tune the cantilever or tracked rollers, and if it is automated, mount the operator and set the travel limits.
What Gate Installation Costs in Brea
| Item | Typical range in Brea |
|---|---|
| Single swing driveway gate | $1,200 – $2,600 |
| Sliding gate, tracked or cantilever | $1,800 – $8,000 |
| Automatic operator add-on | $1,000 – $1,500 |
How long does gate installation take in Brea?
Most Brea installations are done in one day for the gate and posts, with a second short visit if concrete needs cure time before the operator is mounted. A hillside lot with deeper footings can add a day.
Do you pull permits for driveway gates in Brea?
Most residential gate replacements on existing posts do not need a Brea permit, but new footings or a gate that changes driveway access can. We will tell you during the estimate and handle the paperwork if your project requires it. Call (833) 545-6817.
Brands We Service in Brea
We repair and install DoorKing, Elite, Mighty Mule, and LiftMaster systems in Brea, plus five other major automation brands. We stock common control boards, remotes, photo eyes, and limit switches locally, so most Brea repairs do not wait on a parts order. See our brands for the full lineup.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Brea, CA
| Service | Typical range in Brea |
|---|---|
| Hinge repair | $150 – $350 |
| Gate sag repair | $200 – $500 |
| Gate opener repair | $200 – $600 |
| Track cleaning and adjustment | $100 – $250 |
| Post reset | $400 – $900 |
| Weld repair, minor | $150 – $400 |
| Gate opener installation | $1,000 – $1,500 |
| Driveway gate installation | $1,200 – $4,600 |
| Sliding gate installation | $1,800 – $8,000 |
What pushes a Brea job toward the top of these ranges is usually hillside slope, a long-span opening, or an older operator that needs a new board rather than a simple adjustment. Whatever the number, you get it in writing before we start, and you approve the price before any work begins.
Neighborhoods We Serve in Brea
We run calls across Brea every week, from the original tract streets near downtown up through the hillside communities along the 57 side of town. Response time for most Brea repair calls is same day or next morning, depending on where we are in the route.
- Downtown Brea and the 92821 tract core
- Brea Hills and the 92823 foothill developments
- Olinda Ranch and surrounding master-planned streets
- Craig Park area and the neighborhoods off Lambert
- Carbon Canyon side of Brea
Service Area – Cities Near Brea
Wrought Gate Repair serves Brea and the surrounding north Orange County cities. If you are just over the city line, we also work in Fullerton, CA, Placentia, CA, Yorba Linda, CA, and La Habra, CA. Same team, same pricing, same gate-only specialization.
Serving Brea, CA — Our Local Coverage Area
We’re based in the Brea area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Brea
Most Brea repair calls get a same-day or next-morning visit. Automated gate failures, security gates, and a gate stuck open or closed get priority routing because the whole point of the gate is gone until it is fixed. Call (833) 545-6817 and we will give you a real arrival window.
Some Brea HOAs do regulate gate height, material, and finish, especially in the newer 92823 communities. We work with the board or management company to match the existing streetscape, and we will flag any approval requirement before you order a gate.
For repair work we can give a range over the phone, but a firm price for a Brea installation or a post reset needs an on-site look at the slope, the soil, and the existing posts. Estimates are free, and you get the number in writing before any work starts.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Brea Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Emily Chen"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Maria Rodriguez"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Priya Mehta