Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Montclair, CA
Gate installation in Montclair runs $1,800 to $9,400 for most homes here, with the final number set by gate width, automation package, and how much retrofitting your 1950s-era opening needs. We’re Wrought Gate Repair, and we work exclusively on gates. That’s the whole company: repair, automation, and installation. Nothing else. If your Montclair driveway gate sags on rusted hinges, your side-yard gate won’t hold a latch in the block wall, or you want a new automated gate built to fit an opening that predates standard sizes, call (833) 545-6817 for a free estimate.
Why Montclair Homes Are Different
Montclair’s housing stock was built mostly between 1950 and the early 1970s, and that matters more than people expect. Those tract homes still carry their original driveway and side-yard gate openings, and the widths were rarely what we’d call standard today. A 12-foot driveway opening is assumed in most new construction. In Montclair, we regularly measure openings at 10’8″, 11’3″, or 11’9″. The original gate frames match those odd dimensions. So when a homeowner finds a gate panel at a big-box store and comes up short, the issue isn’t the product. It’s that the house was built before the industry standardized.
Climate works against gates here too. Hot inland summers and dry Santa Ana wind events pull moisture out of wood gates, opening cracks and warping stiles. The clay-heavy soils under Montclair’s block walls expand and contract through winter rains, which loosens posts and hinge anchors over a few seasons. We carry shim kits and specialized anchors for block walls on every Montclair job because the fix is rarely just swapping panels. It’s matching new hardware to old masonry, re-setting posts in soil that’s already moved, and treating steel frames for rust before it reaches the hinge mortise. That retrofit reality is what separates Montclair from newer Inland Empire cities to the east, where wider, standardized gates are more common.
Our team has served Montclair since 2012. We know the tract layouts near Central Avenue, the older custom lots farther south, and the mix of block and wood-post construction that changes every few blocks. That matters when we’re ordering steel sections or setting an automated opener’s mounting position, because every job here starts with the opening, not the gate.
Styles & brands we work with
Our Main Montclair Services
Most Montclair calls come down to two problems: a manual gate that stopped swinging or latching, and an electric gate that stopped responding or started reversing mid-cycle. Here’s what each looks like in Montclair specifically.
Gate Repair in Montclair
Manual gate repair in Montclair is dominated by hardware-matched retrofits. The original gates on these 1950s and 60s homes use iron hinges, latches, and frame sections that don’t match today’s store-bought parts. We rebuild hinge mortises in steel and wood, re-anchor posts into block walls, and source deeper-throw latches for fences that have shifted with the clay soil. Wrought iron gates need rust treatment at the weld points, and wood gates need seasonal re-alignment after the Santa Ana winds dry everything out. This is exactly the work our Gate Repair in Montclair page covers in depth.
Electric Gate Repair in Montclair
Electric gates fail differently in Montclair than in coastal areas. Heat and dust from the Santa Ana winds work their way into control boards and actuator housings. Soil movement knocks photo-eye alignment out by fractions of an inch, which is enough to stop a gate mid-cycle. We diagnose opener arms, safety loops, keypads, and receiver boards across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. The goal is same-day diagnosis on most calls so your gate moves again without a multi-week wait. See our Electric Gate Repair in Montclair page for specifics.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Montclair
Gate installation in Montclair is rarely a clean swap. Most homes here were built in the 1950s through early 1970s, which means the driveway opening was sized for the car of that era and the gate frame was welded or bolted to whatever masonry was on hand. Our job is to build a gate that fits the opening as it actually exists, not force a stock panel into place. Hot, dry summers and wet winters in Montclair mean wood gates need sealing and steel gates need a rust plan before installation starts. For the full scope of what we build, see Gate Installation.
Automatic Gate Installation
Signs you need it
You’re getting out of the car to open and close the gate every single time, or your current opener is older than the car it’s opening for.
What it costs in Montclair
Automatic gate installation in Montclair typically runs $4,300 to $9,400, including the opener, safety loops, and the control board.
How we do it
We measure the actual opening, check the foundation depth for the post bases, mount the opener to the gate’s true weight, and set safety loops at the correct depth for Montclair’s clay soil so the gate trips reliably for every vehicle.
Driveway Gate Installation
Signs you need it
Your current driveway gate sags past the latch point, the post anchors are pulling out of a block wall, or the opening is a non-standard width that off-the-shelf panels will never fit.
What it costs in Montclair
Driveway gate installation in Montclair ranges from $2,100 to $7,300, with the spread driven by gate width, material, and whether you’re adding automation.
How we do it
We build the gate to your measured opening, set posts in concrete at the right depth for Montclair’s soil, hang the gate on adjustable hinges, and set the latch so it holds even after a wet winter swells the surrounding wood.
What Gate Installation Costs in Montclair
| Item | Typical range in Montclair |
|---|---|
| Single swing gate, steel or aluminum | $1,800 – $4,200 |
| Driveway gate, custom width | $2,100 – $7,300 |
| Automatic gate with opener | $4,300 – $9,400 |
Does a gate installation in Montclair require a permit?
Most driveway gate installations in Montclair don’t require a permit when the gate is replacing an existing one at the same location and height. If you’re moving the gate line toward the street, changing the driveway approach, or adding a pedestrian gate with new concrete, the city may require plan review. We’ll confirm what applies before work starts.
Do you install gates to fit older, non-standard Montclair openings?
Yes. This is the majority of our work in Montclair. We measure every opening before ordering or building anything, and we fabricate to the actual dimension. Call (833) 545-6817 for a free measure and written price matched to your home’s specific opening.
Brands We Service in Montclair
We maintain working familiarity and parts access for FAAC, BFT, Linear, and Viking systems, alongside LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means no brand-specific dealer roulette and no week-long waits on common boards, arms, and receivers. See our brands for the full service list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Montclair, CA
| Service | Typical range in Montclair |
|---|---|
| Gate repair, general | $145 – $475 |
| Wrought iron gate repair | $175 – $550 |
| Gate opener repair | $195 – $690 |
| Electric gate repair | $225 – $780 |
| Gate motor replacement | $450 – $1,600 |
| Gate sensor / safety loop repair | $115 – $360 |
| Single swing gate, steel or aluminum | $1,800 – $4,200 |
| Driveway gate, custom width | $2,100 – $7,300 |
| Custom gate installation | $2,600 – $8,600 |
| Automatic gate with opener | $4,300 – $9,400 |
Two things push price up in Montclair more than anything else: non-standard openings from the 1950s and 60s that require custom fabrication instead of stock panels, and block-wall anchoring that needs shims and specialty fasteners rather than simple post holes. Whatever the scope, we quote the full price before any work starts and we don’t change it mid-job.
Neighborhoods We Serve in Montclair
We cover all of Montclair’s 91763 ZIP code, from the tract streets near Central and Ramona to the neighborhoods along Mission Boulevard and the older lots south of the 10. Most repair calls in Montclair get a same-day or next-day visit, and installation measures are scheduled around your availability.
- Central Montclair
- North Montclair
- South Montclair
- Montclair Estates
- Kingsley area
Service Area – Cities Near Montclair
Wrought Gate Repair serves Montclair and the surrounding Inland Empire communities. If you’re a few minutes west, see our gate work in Claremont, CA. East of Montclair, we cover Ontario, CA and Upland, CA. North along the foothills, we work in La Verne, CA. The same gate-only team handles each city.
Serving Montclair, CA — Our Local Coverage Area
We’re based in the Montclair area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Montclair
For urgent repairs like a gate stuck open or an opener that won’t respond, we typically arrive same day or next morning in Montclair’s 91763 ZIP. Non-urgent work is scheduled within a few business days. Call (833) 545-6817 and tell us what the gate is doing, and we’ll give you a straight arrival window.
Some Montclair HOAs have architectural guidelines covering gate height, material, and color, especially in planned communities. If your home is in an HOA, we recommend checking the CC&Rs before ordering a new gate. We’ll build to whatever spec your HOA requires, including matching existing wrought iron or steel finishes on adjacent properties.
Yes. That’s standard in Montclair, where most original gates are anchored into block walls rather than free-standing posts. We carry shim kits, specialty masonry anchors, and concrete-setting tools on every truck so the post holds in the wall’s actual condition rather than what it looked like on paper.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Montclair Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Norma Reyes"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Emily Chen"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Maria Rodriguez