Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Yorba Linda, CA
Gate installation in Yorba Linda runs between $2,800 and $9,500 for most residential driveway jobs, depending on whether you’re replacing a manual gate or adding a full automatic opener system. Because so much of this city sits on hillside and equestrian-zoned lots, we’re usually quoting custom steel and wrought iron builds with long track runs, not stock pedestrian gates. Wrought Gate Repair has served Yorba Linda since 2012, and the difference starts with a single fact: we work exclusively on gates. Call (833) 545-6817 for a free measure and written quote.
Why Yorba Linda Homes Are Different
The housing stock in the 92885, 92886, and 92887 ZIP codes was largely built between the 1960s and 1990s, and it shows in the gate hardware we pull out of the ground here. Most of these properties were originally fenced with ranch pipe and chain link, then upgraded over the decades to wrought iron driveway gates as the city grew into a more estate-oriented market. That means we regularly find old steel posts set in concrete that was poured forty years ago, with hinges that have never been replaced and gate leaves that have been welded more than once.
Yorba Linda is still a low-density, semi-rural hillside suburb. A large share of homes sit behind private driveways on large lots, many of them horse-zoned, especially in the 92887 hills and the older 92886 core. That changes the work. Driveway gates here are longer than average, often 12 to 16 feet per leaf on a double swing. Sloped approaches mean the gate has to be hung with more clearance on one side. And the Santa Ana wind season, which hits this part of north Orange County hard, routinely racks long swing gates out of plumb and strips gearboxes on aging slide operators.
Heat and dust matter too. Inland summers bake the finish off iron gates and dry out operators and lubricants. Winter rains then expose the corrosion that was building silently in hinges and footings. A gate company that treats Yorba Linda like flat coastal Orange County misses all of this, and the repair fails within a season. We price and plan around the actual conditions here because this is the terrain we work in every week.
Styles & brands we work with
Our Main Yorba Linda Services
Most Yorba Linda customers call us for one of two reasons: a gate that has stopped moving, or one that has stopped sealing, sagging, or latching. Here is how each breaks down locally.
Gate Repair in Yorba Linda
Manual gate repair here usually means a double driveway gate that has dropped on the hinge side and now drags on the asphalt, or a ranch pipe gate whose latch no longer lines up after years of horse-trailer use. The 92887 hills add slope-related issues: gates hung on angled driveways pull hard on their top hinges, and welded repairs from previous owners often fail at the joint. We cut out failed welds, re-square the frame, replace hinges with heavier-gauge steel where needed, and reset posts that have shifted in the clay-heavy soil. Full details are on our Gate Repair in Yorba Linda page.
Electric Gate Repair in Yorba Linda
Electric gate failures in Yorba Linda cluster around two events: Santa Ana wind season, which overloads swing arm operators and strips slide gate gearboxes, and the first winter rain, which shorts out old photo eyes and keypads that have been sun-baked for months. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, so we’re rarely the wrong call for the operator already bolted to your post. Read the specifics on our Electric Gate Repair in Yorba Linda page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Yorba Linda
New gate installation in Yorba Linda almost always means a custom build, not a pre-hung unit. The lots are too large, the driveways too sloped, and the existing posts too old to make an off-the-shelf gate work well. Whether you are replacing a sagging pipe gate on a horse property in the 92887 hills or adding an automatic driveway gate to a 1970s ranch in the 92886 core, we measure on site, build or order to those measurements, and set the hardware for the actual grade and wind exposure of your property. Our Gate Installation team handles the whole job, from cutting out the old gate to the final limit-switch adjustment.
Automatic Gate Installation
Signs you need it
You’re opening and closing a heavy driveway gate by hand multiple times a day, or you’ve already got an operator that’s been repaired twice and still fails in Santa Ana wind events.
What it costs in Yorba Linda
Automatic gate installation in Yorba Linda typically runs $4,500 to $9,500 for a complete system including operator, safety edges, keypad, and gate build to fit your existing posts.
How we do it
We measure the driveway width and slope, confirm gate weight and post condition, mount the operator, run power and low-voltage wiring, set safety edges and photo eyes, and tune travel limits for the specific grade.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is rusted through at the bottom rail, leaning more than two inches out of plumb, or sized wrong for the vehicles regularly using it.
What it costs in Yorba Linda
Driveway gate installation in Yorba Linda typically falls between $2,800 and $6,500 for a manual steel or wrought iron double gate, depending on length and whether posts need replacing.
How we do it
We demolish the old gate, inspect and reset or replace the posts, hang the new gate on new hinges, and weld or bolt the frame so it seals cleanly without dragging on the driveway.
What Gate Installation Costs in Yorba Linda
| Item | Typical range in Yorba Linda |
|---|---|
| Manual driveway gate (steel or wrought iron, double leaf) | $2,800 – $6,500 |
| Automatic gate with operator, safety edges, and keypad | $4,500 – $9,500 |
| Post replacement or reinforcement (per post) | $450 – $900 |
Do I need a permit to install a gate in Yorba Linda?
Most driveway gate installations in Yorba Linda don’t require a city permit if you’re replacing an existing gate on existing posts, but adding an automatic opener can trigger electrical permit requirements in some cases. Check with the city before we start, and we’ll build the quote so you know exactly what’s included. Call (833) 545-6817 and we’ll walk you through the process.
How long does a gate installation take in Yorba Linda?
Most custom gate installations in Yorba Linda take two to three weeks from measure to final adjustment, with the on-site work typically completed in one to two days. Weather and post condition can extend that, but we’ll tell you before we start, not after.
Brands We Service in Yorba Linda
Most Yorba Linda gates run on one of four operator brands: LiftMaster, DoorKing, Elite, or Mighty Mule. We stock common boards, arms, and safety parts for all of them locally, which shortens repair turnaround. See our brands page for the full lineup we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Yorba Linda, CA
| Service | Typical range in Yorba Linda |
|---|---|
| Gate repair (manual, hinges, latch, weld) | $280 – $650 |
| Electric gate repair (operator, board, arm) | $380 – $1,100 |
| Automatic gate installation (full system) | $4,500 – $9,500 |
| Manual driveway gate installation (double leaf) | $2,800 – $6,500 |
| Post replacement or reinforcement (per post) | $450 – $900 |
| Track replacement for slide gates | $350 – $800 |
| Solar panel add-on for gate operator | $600 – $1,200 |
| Keypad or intercom install | $250 – $600 |
Prices in Yorba Linda run higher than flatland Orange County because of the extra labor involved with hillside lots: longer gates, sloped ground, and the need to reset posts that have shifted. Every job is quoted and agreed before we start, so the number on the invoice matches the number on the quote.
Neighborhoods We Serve in Yorba Linda
We work across all of Yorba Linda, from the older 92886 core to the hillside estates in 92887 and the neighborhoods along the 92885 corridor. Response time for most repair calls is same-day or next-day, depending on when the call comes in.
- Bryant Ranch
- East Lake Village
- Kerrigan Ranch
- Travis Ranch
- Fairmont Hills
Service Area – Cities Near Yorba Linda
Wrought Gate Repair is based in Chino, CA, and we run gate repair and installation calls throughout the Yorba Linda area and the surrounding cities. That includes Placentia, CA, Brea, CA, Villa Park, CA, and Los Serranos, CA. If your gate is down and you’re anywhere in this part of Orange County, one call covers it.
Serving Yorba Linda, CA — Our Local Coverage Area
We’re based in the Yorba Linda area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Yorba Linda
We schedule repair calls across Yorba Linda on a same-day or next-day basis for most gate failures. Emergency calls for a gate stuck open or stuck closed get priority. Call (833) 545-6817 and we’ll give you a straight answer on when we can be there.
Some Yorba Linda HOA communities, especially the newer developments around East Lake Village, have architectural review requirements for gate changes. We’ve worked with enough Yorba Linda HOAs to build installations that meet their specifications, but you’ll want to check your community’s rules before ordering. We can provide drawings and specs for HOA submission.
We cover all three Yorba Linda ZIP codes: 92885, 92886, and 92887. That includes the hillside horse properties up in the 92887 area and the older ranch homes in 92886. Scheduling works the same across all three.
Call Wrought Gate Repair at (833) 545-6817 for a free estimate on any gate repair, electric gate service, or new installation in Yorba Linda. We work exclusively on gates, and we quote every job before we start.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Yorba Linda Customers Say
"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Gilbert Delgado"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Carlos Salazar"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Colleen Rhodes