Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Los Serranos, CA
Gate installation in Los Serranos usually means a heavy driveway gate on a large-lot foothill property, not a lightweight pedestrian gate in a tract subdivision. We install, repair, and automate gates across ZIP 91709, and we work exclusively on gates. If you have a sagging wrought iron driveway gate, a sliding gate that binds in summer heat, or an old operator that quit after a Santa Ana wind event, call (833) 545-6817 for a free estimate.
Why Los Serranos Homes Are Different
Los Serranos is one of the older, semi-rural foothill communities of Chino Hills, and the gate work here reflects that. Properties sit on larger lots, many with horse-keeping, and the gates tend to be long, heavy driveway and corral gates rather than the uniform decorative entry gates you see in newer tract developments. Older ranch-style and custom homes share space with some newer infill, but the common thread is perimeter fencing, split-rail, chain-link, and wrought iron sections that have been standing for decades.
The climate drives more repair calls than rust does. Hot, dry summers and Santa Ana winds put real stress on gate hardware, especially wide gates that catch wind like a sail. The bigger factor, though, is the soil. Clay-heavy ground expands and contracts seasonally, and over time that movement shifts gate posts, throws hinges out of alignment, and racks gate frames. In Los Serranos, re-hanging a gate and re-setting posts is often the actual fix, even when the operator gets blamed first. Wind and soil movement, not corrosion, are what we deal with most on these properties.
Homeowners here want a gate specialist who understands that a 16-foot steel driveway gate on a horse property behaves differently than a 6-foot aluminum gate on a zero-lot-line home. We work on both, but the Los Serranos job mix skews toward the heavy end.
Styles & brands we work with
Our Main Los Serranos Services
Most Los Serranos homeowners call us for two things: fixing an existing gate that has stopped working right, and repairing or replacing the electric operator that moves it. Here is what each service involves in this area.
Gate Repair in Los Serranos
Gate repair in Los Serranos usually starts with a post or hinge problem, not a broken latch. Clay soil movement shifts posts out of plumb, and a gate that once swung clean starts dragging, binding, or refusing to close. We re-set posts, re-hang heavy gates, repair or replace hinges, and straighten racked frames on wrought iron and steel gates. Long horse-property gates put more leverage on every hinge and weld point, so we check the full hanging structure, not just the visible problem. Learn more about our Gate Repair in Los Serranos service.
Electric Gate Repair in Los Serranos
Electric gate repair in Los Serranos frequently involves an operator working harder than it should because the gate itself is out of alignment. We diagnose the whole system: operator, control board, safety edges, photo eyes, remote receivers, and the gate’s mechanical condition. When a Santa Ana wind event pushes a wide gate against its stops, operators burn out limit switches and strip gears. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. See our Electric Gate Repair in Los Serranos page for details.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Los Serranos
Gate installation in Los Serranos means building for wind, clay soil, and heavy use. Homes here sit on larger foothill lots, many with horses, and the standard job is a long driveway gate that has to hold its line through Santa Ana wind events and seasonal ground movement. We size posts, hinges, and operators for the actual gate weight and wind load, not a generic spec. Whether you need a new sliding driveway gate or an automated swing gate on a horse property, we build it to stay square. Our full Gate Installation service covers design, fabrication, automation, and final adjustment.
Automatic Gate Installation
Signs you need it
You’re getting out of the car to open and close a heavy gate every day, or you want controlled access to a horse property or long driveway without running power out to the street by hand.
What it costs in Los Serranos
Automatic gate installation in Los Serranos typically runs $3,500 – $9,000 depending on gate size, operator type, and whether new power conduit has to be trenched.
How we do it
We measure the gate’s actual weight and span, select an operator rated for that load plus wind margin, set new posts in concrete below the clay movement line, run or verify power, install safety edges and photo eyes, and program remotes and keypads before testing under load.
Driveway Gate Installation
Signs you need it
Your existing driveway gate sags, binds, or no longer closes square, and repairs would cost more than a properly built replacement sized for a wide Los Serranos lot.
What it costs in Los Serranos
A new driveway gate in Los Serranos typically runs $2,500 – $7,000 depending on width, material, and whether it is a swing or slide design.
How we do it
We set heavier-gauge posts in concrete at a depth that resists clay expansion, hang the gate with adjustable hinges or a welded slide track, align the frame, and test the full swing or slide path before finishing.
Sliding Gate Installation
Signs you need it
Your driveway has limited swing clearance, slopes upward from the street, or the existing swing gate catches wind and strains its operator every time it moves.
What it costs in Los Serranos
Sliding gate installation in Los Serranos typically runs $4,000 – $9,500 for a cantilever or track slide gate with an automated operator.
How we do it
We pour a reinforced base or install a cantilever roller system, build or hang the gate in its slide plane, install the rack and operator, and adjust travel limits and safety sensors so the gate stops cleanly every cycle.
What Gate Installation Costs in Los Serranos
| Item | Typical range in Los Serranos |
|---|---|
| Driveway gate installation | $2,500 – $7,000 |
| Automatic gate installation (with operator) | $3,500 – $9,000 |
| Sliding gate installation | $4,000 – $9,500 |
How long does a gate installation take in Los Serranos?
Most Los Serranos installations take one to two days on site, plus concrete cure time before final operator tuning. Larger sliding gates or new trenching for power runs add a day or two. We schedule around your access needs and give you a written timeline before work starts.
Do you handle the concrete work and the power run?
Yes. We set posts in concrete, pour operator pads, trench and run conduit for power, and connect low-voltage safety devices. One call covers the steel, the concrete, and the electronics. Call (833) 545-6817 and we will walk the site with you and quote the complete job.
Brands We Service in Los Serranos
We service nine major gate automation brands, including FAAC, BFT, Linear, Viking, LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Los Serranos, we keep common boards, limit switches, safety edges, and remote receivers stocked for the brands we see most. See our brands page for the full lineup and what we repair.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Los Serranos, CA
| Service | Typical range in Los Serranos |
|---|---|
| Gate repair (hinge, latch, or alignment) | $175 – $450 |
| Electric gate operator repair | $225 – $650 |
| Gate opener installation (retrofit) | $900 – $2,800 |
| Driveway gate installation | $2,500 – $7,000 |
| Automatic gate installation | $3,500 – $9,000 |
| Sliding gate installation | $4,000 – $9,500 |
| Gate post reset (concrete work) | $350 – $900 |
| Control board or limit switch replacement | $200 – $600 |
In Los Serranos, the two biggest price drivers are gate width and post condition. A 16-foot wrought iron gate on a horse property needs a larger operator and heavier hardware than a 10-foot gate on a small lot, and posts that have already moved in the clay soil often need to be re-set before a new gate can be hung properly. Every price is quoted and agreed before any work starts, so you will not see a surprise number on the invoice.
Neighborhoods We Serve in Los Serranos
We work throughout Los Serranos and the surrounding ZIP 91709 area, from the older foothill lots near the Chino Hills border to the newer infill developments closer to Chino. Response time for most repair calls in Los Serranos is same-day or next-day, depending on when you call and what parts the job needs. We regularly serve:
- The older ranch lots near Pipeline Avenue and the equestrian properties off it
- The custom homes along the Chino Hills foothill edge
- The infill developments near the Chino side of 91709
- The large-lot parcels around the Los Serranos Country Club area
Service Area – Cities Near Los Serranos
Wrought Gate Repair is based in Chino and serves Los Serranos plus the surrounding foothill and valley communities. We regularly work in Chino, CA, Yorba Linda, CA, Montclair, CA, and Pomona, CA. If you are near Los Serranos but in a neighboring city, call and ask, we likely cover your area.
Serving Los Serranos, CA — Our Local Coverage Area
We’re based in the Los Serranos area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Los Serranos
Most Los Serranos repair calls are reached same-day or next-day. Emergency calls, like a gate stuck open on a horse property or a vehicle trapped behind a failed operator, get priority. Call (833) 545-6817 and we will give you a real arrival window, not a vague promise.
Most repair work, including post re-setting and operator swaps, needs no permit. New driveway gate installations or significant concrete work sometimes trigger a city review, and HOA-governed lots may have their own rules. We can tell you what your property needs during the estimate, and we handle the paperwork where required.
Yes. Horse properties and corral gates are a regular part of our Los Serranos work. Long, heavy gates on clay soil move more than standard gates do, so we re-hang and re-set posts as often as we fix operators. We work on manual and motorized gates, including slide gates on pipe rail and square tube frames.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Los Serranos Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Jasmine Coleman"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— Marisol Flores"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Gilbert Delgado