Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Phelan
Electric gate repair in Phelan usually means one of three things: a motor that won’t run, a gate that sags or drags on its hinges, or a safety sensor that keeps reversing the cycle. We handle all three, and we get to your property quickly. Call Wrought Gate Repair at (833) 545-6817 and you’ll talk to a gate specialist, not a dispatcher reading from a script.
Phelan’s high-desert lots put gates through work that suburban gates never see. Long driveway spans, pipe and tube-steel frames, and wind that doesn’t let up. We know the terrain because we work it every week. Whether you’re off Beekley Road, Sheep Creek, or out toward the 92371 acreage, our techs know what a wind-twisted hinge post looks like before they even pull up.
Why Wrought Gate Repair Is Phelan’s Preferred Electric Gate Repair Company
We work exclusively on gates. That’s not a slogan. Every tech on our crew, every part on our truck, every diagnostic we run is gate-specific. A fence company fixes gates as a side job. A handyman takes a guess. We’re the shop Ruben Castellano built around one trade: gate repair, electric gate repair, and gate installation. Nothing else.
Phelan homeowners call us for a simple reason. When a Mighty Mule arm burns out or a LiftMaster control board faults, we know the failure mode before we open the housing. Nine brands. LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, Mighty Mule. We stock common parts locally and carry board-level diagnostics, so we don’t guess and we don’t order parts twice.
Ruben Castellano set the standard on this: answer the call, name the likely failure, quote the repair, do the repair. Our Phelan customers keep our number because when the wind takes their gate down in March, we show up and fix it right. Not patch it. Fix it.
Styles & brands we work with
Automatic Gate Repair in Phelan
Automatic gate repair in Phelan starts with the post, not the motor. On this sandy high-desert ground, winter freeze-thaw heaving works hinge post footings loose, and once the post leans, the gate drags and the operator fights it. We correct the post first, then the automatic system. On a typical Phelan swing gate, automatic gate repair runs $220 to $480 when it’s a limit switch, hinge, or sensor issue. If the post needs re-setting in compacted base, expect a job more in the $500 to $1,100 range depending on gate weight and footing work.
That’s the work this page is really about. A heavy custom-fabricated tube-steel gate off Beekley Road began dragging and twisting in the spring gusts off the open desert. We pulled the leaned hinge post, re-set the footing in properly compacted base, corrected the sag, and re-tuned the LiftMaster operator’s limits and safety photocell. The gate cycled smoothly again. That’s the repair, not a guess.
Post and Frame Correction
You can’t tune an operator on a leaning post. We re-set footings, square frames, and rebuild hinge points before we touch the motor. In Phelan, this step matters more than almost anywhere else in the High Desert.
Operator and Limit Re-Tuning
Once the structure is square, we set travel limits, force settings, and photocell alignment to match the actual gate weight and wind load on your specific lot. Off-the-shelf factory settings don’t survive a Phelan spring.
Electric Gate Motor in Phelan
Electric gate motor work in Phelan is about matching the motor to the gate. A gate motor sized for a 14-foot suburban gate gets tortured on a 22-foot pipe-railed ranch gate in sustained wind. We see burned armature motors, stripped gearsets, and thermal overloads from this mismatch all the time. In Phelan, electric gate motor replacement typically runs $650 to $1,800 installed, depending on gate weight, brand, and whether the control board and transformer carry over. A straight motor swap on an existing LiftMaster or Mighty Mule setup runs toward the lower end; a full motor-and-board replacement on a heavy custom gate runs higher.
We don’t sell you a motor by horsepower spec alone. We measure the gate, the wind exposure, and the duty cycle your driveway actually demands. Then we spec the motor. Manual or motorized, your gate gets a motor that isn’t redlining every time the Santa Anas kick up.
Underground and Linear Arm Systems
Some Phelan properties run underground operators or linear screw arms on ornamental gates. These need different diagnostics than a standard swing arm. We service them without referring you out.
Solar-Powered Gate Operators
Lots in the 92329 and 92371 ZIP codes often run solar-charged operators because AC power is nowhere near the gate. That adds battery health, panel angle, and charge controller condition to the motor diagnosis. We check all three.
Trusted Brands We Service in Phelan
Whether you have a DoorKing slide operator, an Elite swing arm, a Mighty Mule DC actuator, or a LiftMaster control system, we carry program knowledge and common parts for all four in Phelan. That means when we diagnose a failed limit switch or a blown capacitor on a Viking or FAAC board, we’re not waiting on a dealer to ship to the High Desert. Most repairs on these brands are same-visit when parts are on the truck, and we quote part cost before we install anything. One call covers it, even on older legacy boards you’d think nobody remembers.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Phelan Homes
- Leaning hinge posts from freeze-thaw heaving. Sandy soil plus winter nights below freezing equals posts that move. On a heavy swing gate, a quarter-inch lean at the post becomes a six-inch sag at the latch.
- Wind-twisted frames and sheared hinges after spring gusts. Tall pipe and tube-steel gates catch the Mojave wind like a sail. We straighten or rebuild frames and reinforce hinge points so the operator isn’t fighting a crooked gate.
- Blowing sand in rack, pinion, and limit switches. Fine desert sand gets into slide-gate tracks and switch housings. Gates bind, reverse, or stop mid-cycle. Cleaning and sealing these points is part of every slide-gate repair we do in Phelan.
- Solar battery and charge controller failures. Intense sun bakes panel wiring while overnight temperatures stress lead-acid and lithium batteries. A dead battery on a solar operator looks like a dead motor. We test before we replace, so you don’t pay for a motor when all you needed was a battery.
Pricing for Electric Gate Repair in Phelan, CA
Electric gate repair in Phelan runs from about $180 for a simple safety sensor alignment or remote programming to $1,800 for a full operator replacement on a heavy custom gate. The common jobs land in between: limit switch and hinge repair $220 to $480, post re-set and sag correction $500 to $1,100, motor replacement $650 to $1,800, control board replacement $350 to $850, keypad and receiver replacement $150 to $400. We quote the full price before any work starts, in writing, and the price we quote is the price you pay. Free estimates for all electric gate work across Phelan, Piñon Hills, and the surrounding High Desert.
Call (833) 545-6817 for an exact quote on your gate. We’ll come out, diagnose it, and hand you a number before anything gets taken apart.
We Also Serve Cities Near Phelan
We run our full Electric Gate Repair fleet through Phelan and the surrounding High Desert. That includes Piñon Hills, Wrightwood, Oak Hills, and Hesperia. If your gate is down anywhere in the Victor Valley or the foothills above it, our Electric Gate Repair in Phelan team is already close. Same diagnostic, same brand coverage, same up-front quote.
Serving Phelan, CA — Our Local Coverage Area
We’re based in the Phelan area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Phelan
Because the post is moving, not the hinge. In Phelan’s sandy soil, winter freeze-thaw cycles push hinge post footings loose, and tightening hinge bolts just pulls the post further out of plumb. The gate sags because the post leans. Our first step is checking post footing depth and compaction, then re-setting the post in properly compacted base before we adjust anything else. That’s the repair order, and it’s why we see this specific failure more on Beekley Road acreage than anywhere else. Call (833) 545-6817 for a post inspection and we’ll tell you if your footing is the problem.
The sensors must be mounted at the heights and spacing required by UL 325 for the gate type and direction of travel, and they must hold the gate open or reverse it on obstruction anywhere in the travel path. We check photocell beam alignment, edge sensor continuity, and force settings on every repair. If your sensors are wired around or aimed at the sky, the repair isn’t legal and we’ll tell you so before we touch the motor. High winds and blowing sand in Phelan knock sensor alignment out more often than people realize. Call (833) 545-6817 for a sensor verification with any repair.
A properly sized solar operator with enough battery capacity can handle a long ranch gate, but most solar kits sold online are sized for lightweight suburban gates and fail on heavy pipe and tube-steel Phelan gates in sustained wind. You need an operator with enough static thrust to hold the gate against gusts without stripping the gearset, and enough battery reserve to cycle the gate through cloudy winter weeks. We spec solar systems for the actual gate weight, wind exposure, and solar hours on your specific parcel. Call (833) 545-6817 and we’ll measure before we recommend.
We repair nine brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means we carry board-level diagnostics and common parts for all nine in Phelan, so we’re not waiting on a brand-specific dealer to ship components to the High Desert. Most repairs on these brands are completed same-visit when parts are on the truck. Call (833) 545-6817 with your brand and symptom, and we’ll tell you over the phone what we’re likely looking at.
Usually it’s sand in the track or rack, or worn guide rollers, not a motor problem. In Phelan, blowing sand works its way into slide-gate tracks and limit switch housings, and the gate binds against the built-up grit. The operator senses the obstruction and reverses. We clean and seal the track and pinion, replace worn rollers, and then re-set force and limit settings so the board isn’t fighting a dirty track. You don’t need a new motor for most slide-gate reversal issues in Phelan. Call (833) 545-6817 and we’ll diagnose the bind before quoting a repair.
Written by Ruben Castellano, Owner at Wrought Gate Repair, serving Phelan and the High Desert since the company’s first gate job.