Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Pomona
Electric gate repair in Pomona typically runs $185 – $540 depending on the failure, and in most cases we can have a technician at your property the same day or next morning. We work on gates across the entire city, from the historic blocks around Lincoln Park to the tract-home neighborhoods of 91766 and 91767. Pomona’s heat and older housing stock create a specific set of gate failures we see week after week, and we carry parts for the brands most common here. Call (833) 545-6817 and we’ll give you a straight answer before we ever roll a truck.
Why Wrought Gate Repair Is Pomona’s Preferred Electric Gate Repair Company
We work exclusively on gates. That’s the whole business. No fencing, no garage doors, no general contracting on the side. Every diagnostic hour, every truck stock decision, and every training session is spent on one trade. For a homeowner in Pomona with a failed opener or an HOA manager downtown facing an angry resident whose keypad stopped working, that focus means we arrive already familiar with the failure pattern, not learning it on your dime.
Ruben Castellano built Wrought Gate Repair around a simple idea: a gate isn’t a fence with hinges. It’s a structural and mechanical system, and it fails in predictable ways that only reveal themselves when you’ve fixed several hundred of them. Whether your system is a DoorKing slide operator mounted beside a shared driveway or an older Mighty Mule swing arm on a mid-century pedestrian gate, we’ve diagnosed that exact configuration before. We service all nine major automation brands, so you’re not making three calls to find someone willing to touch your specific opener.
Pomona customers call us because the problem gets fixed the first time, and because when we quote a repair, that’s the price. No open-ended “we’ll see what we find” invoices. Ruben reviews every estimate before work starts, and the number you agree to is the number you pay.
Styles & brands we work with
Commercial Gate Operator in Pomona
Commercial Gate Operator work in Pomona means something different depending on where the property sits. Downtown and the industrial blocks off Holt Avenue run older DoorKing and LiftMaster units that have been through years of heat cycles. The 91767 and 91766 corridors have a mix of mid-century buildings with original operators still in service. A commercial operator failure here usually presents as a gate that stalls mid-travel, a keypad that accepts codes but won’t open, or a motor that hums without moving the gate at all.
We repair and replace commercial gate operators at apartment complexes, parking lots, warehouses, and downtown storefronts. A failed operator at a commercial property in Pomona is a liability problem as much as an access problem. We triage those calls with urgency.
Operator and Control Board Diagnostics
Most commercial gate operator failures in Pomona are electrical, not mechanical. We bench-test control boards, check limit switch wiring, and verify transformer output before recommending replacement. Often the fix is a $220 – $340 board repair, not a $3,000 operator swap. When the operator itself is done, we quote replacement up front.
Safety Loop and Photocell Compliance
Commercial operators in Pomona must meet UL 325 and current city inspection standards. If your loop detector is failing or your safety edge is missing, we correct that as part of the repair. Downtown properties with pedestrian traffic adjacent to the gate path get special attention on this.
Gate Opener Repair in Pomona
Gate Opener Repair in Pomona covers swing arms, slide operators, keypads, remotes, safety sensors, and the control boards that tie them together. The most common call we get in 91766 and 91767 is a gate that worked fine for fifteen years and stopped suddenly – usually after a heat wave or a Santa Ana event. What happened is the operator didn’t die. A component degraded, and the system’s safety brain shut it down.
Residential opener repair in Pomona typically runs $185 – $430. That includes diagnostic time, parts, and the repair itself. If the motor gear is stripped on a LiftMaster slide operator, you’re on the higher end. If it’s a failed limit switch on a Mighty Mule swing arm, the lower end. We quote before work starts, every time.
Keypad and Remote Failure
Pomona’s heat does a number on keypad membrane buttons and remote transmitter batteries. If your keypad intermittently accepts the code, or only works when you’re standing inches away, we test the receiver and the keypad independently. We stock common keypad models for DoorKing, LiftMaster, and Mighty Mule systems, so this is usually a one-visit fix.
Overheating and Motor Protection Reset
When an opener in Pomona shuts down on a hot afternoon and works again the next morning, the motor’s thermal protection is tripping. That means something is increasing load: a sagging gate, a dry bearing, a misaligned rack, or a failing capacitor. We trace the load, not the symptom. Replacing the overheating motor without fixing the drag is a $500 way to buy six more months of frustration.
Trusted Brands We Service in Pomona
We stock parts and service all nine major gate automation brands. LiftMaster and DoorKing are the big two in Pomona’s commercial and HOA setups. Elite and Mighty Mule show up on a lot of residential swing gates from the 1990s and 2000s, especially in the 91766 and 91767 tract neighborhoods. Having the parts on the truck means most Electric Gate Repair calls in Pomona are completed in one visit. We don’t get halfway through a diagnosis and tell you we’ll be back when the part ships. If it’s a brand-specific board or motor, we source it fast and schedule the follow-up within days, not weeks.
Common Electric Gate Repair Problems We See in Pomona Homes
- Heat-seized latch hardware on mid-century gates. The original metal gates in 91766 and 91767 were built when Pomona was a lot cooler. After decades of Inland Valley sun, the latch mechanisms bind, the hinges gall, and the opener strains against hardware that should move freely. We free, repair, or replace that hardware before it kills the motor.
- Sagging gates with cracked century-old concrete posts. Around Lincoln Park and the downtown historic districts, gate posts are set in concrete that was poured before 1930. It heaves, it cracks, and the gate sags. Hinge tightening won’t fix a footing problem. We re-set posts and re-align gates so the opener isn’t fighting gravity.
- Slide gate binding on shared driveways. Tight rights of way in Pomona mean a lot of slide gates where a swing gate physically won’t fit. When the rack and pinion bind because the driveway concrete settled, the operator overheats and the gate stalls. We fix the alignment and the operator together.
- Safety sensor and photocell failures after Santa Ana events. Wind-driven grit gets into photo eye lenses, and heat degrades the wiring insulation. A gate that reverses for no reason, or won’t close at all, is usually a sensor issue. It’s the part most other repair companies misdiagnose as a bad motor.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Pomona, CA
Here’s what Pomona homeowners and property managers actually pay for common electric gate repair work:
- Keypad or remote receiver repair: $145 – $260
- Safety sensor or photocell replacement: $160 – $310
- Limit switch or control board repair: $220 – $420
- Swing arm or slide operator repair: $185 – $540
- Post re-setting with gate re-alignment (historic districts): $650 – $1,400 depending on footing work
Every quote is written, reviewed by Ruben, and agreed to before any work starts. No surprise line items. No “while we were in there” additions. Your estimate is free whether you hire us or not. Call (833) 545-6817 and tell us what your gate is doing.
We Also Serve Cities Near Pomona
Our Electric Gate Repair in Pomona service area extends through the neighboring communities we work in every week. La Verne and Claremont have their own crop of older estates with aging gate systems. Montclair and the Los Serranos area run toward tract homes with original operators hitting end of life. If your gate is acting up anywhere in the Pomona Valley, call us and we’ll be straight with you about whether it’s a one-visit fix.
Serving Pomona, CA — Our Local Coverage Area
We’re based in the Pomona area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Pomona
No. In Lincoln Park and downtown Pomona, sagging gates are usually a post footing problem, not a hinge problem. The concrete those posts were set in was poured a hundred years ago, and it’s cracked and heaved. You can replace hinges and the gate will sag again within months because the post itself is moving. We re-set the footing, true the post, then align the gate. It’s more work than a hinge swap, but it’s the only repair that lasts on these old properties. Call (833) 545-6817 and we’ll tell you honestly which one you need.
Because Pomona’s summer heat pushes a struggling opener past its thermal limit. If your gate is even slightly misaligned, has a dry bearing, or a worn capacitor, the motor works harder to move the same gate. In 105-degree heat, that extra load trips the thermal overload, and the gate shuts down. The fix is finding and fixing the load issue, not just resetting the breaker. We’re seeing this constantly in the 91766 and 91767 tracts this season. A free diagnostic will show you what’s dragging.
Yes. Tight-clearance slide gate work is standard for us in Pomona, especially in older neighborhoods where the driveway and right of way were designed before cars got wider. We recently serviced a LiftMaster slide gate on a shared driveway in Lincoln Park where the original 1920s concrete footing had settled, causing the rack and pinion to bind and the operator to overheat. After re-leveling the footing and realigning the track, we replaced the limit switch and added a safety photocell to meet UL 325. The gate now runs smoothly, and the homeowner can finally use their keypad entry without the gate stalling halfway. If your slide gate is fighting you, call us before it quits entirely.
Heat degradation in the keypad wiring or the receiver board is the usual culprit in Pomona. The membrane buttons on keypads stiffen and crack after repeated exposure to Inland Valley sun, and the thin wiring behind the keypad housing gets brittle. Sometimes it’s the keypad itself. Sometimes the keypad is fine and the opener’s receiver board has overheated. We test both separately so you’re not buying a part you don’t need. Most keypad fixes in Pomona run $145 – $260.
Yes, we service commercial gate operators throughout Pomona’s downtown core, the Holt Boulevard corridor, and the commercial blocks around the Fairplex. Downtown operators are mostly DoorKing and LiftMaster units, and many of them are original installs from the 1990s. We handle repairs, safety compliance corrections, and full replacements when the unit is past economical repair. Commercial calls get priority scheduling. Call (833) 545-6817 and tell us what the gate is doing.
Get Your Pomona Gate Fixed Today
Tell us what the gate is doing, and we’ll give you a straight answer. We come out, diagnose the problem, and put a price in writing before anything gets touched. If it’s a simple fix, you’ll know. If it needs real work, you’ll know that too, with the number up front. Call (833) 545-6817 for a free estimate from Wrought Gate Repair.
Written by Ruben Castellano, Owner at Wrought Gate Repair, serving Pomona and the Pomona Valley with gate-only expertise.