Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateMighty Mule Gate Repair in Crestline, CA | Wrought Gate Repair
We provide independent Mighty Mule gate repair across Crestline, CA, including the FM-series swing arms, MM-series openers, and solar battery kits that mountain properties depend on. The difference here is terrain: Crestline’s sloped driveways and freeze-thaw ground movement knock gate posts out of alignment, which throws Mighty Mule arm geometry off and makes the operator fault even when the motor itself is fine. If your Mighty Mule gate is binding, reversing mid-travel, or refusing to latch, call Wrought Gate Repair at (833) 545-6817 for a straight diagnosis and a fix that holds through the next snow season.
Why Crestline Residents Choose Us for Mighty Mule Service
We work exclusively on gates. Not fences, not garage doors, not general contracting. That focus means every tech we send to a Crestline home has spent years inside San Bernardino Mighty Mule service control boxes, swapping corroded battery harnesses, resetting limit switches, and learning how these openers behave when a San Bernardino Mountains winter hits them hard. Ruben Castellano, who runs Wrought Gate Repair, learned the electrical and mechanical side of automated systems through the Industrial Technology program at Chaffey College in Rancho Cucamonga, then spent over a decade turning that into hands-on work across the Inland Empire’s hillside properties. He’s the one who will look at your Mighty Mule FM500 and tell you whether that corroded control board is worth replacing or whether the whole operator has reached the end of its useful life. We carry OEM Mighty Mule boards, battery harnesses, and gear assemblies when they’re available, and we’ll tell you plainly when an aftermarket hinge or bracket will actually outlast the original in mountain conditions.
Styles & brands we work with





Common Mighty Mule Gate Repair Problems We Solve in Crestline
- Corroded control boards and battery harnesses. Crestline’s winter moisture sneaks into outdoor-mounted Mighty Mule control boxes, and repeated freeze-thaw cycles do the rest. We open the box, find the green crust on the harness connector, and replace the board or harness before it strands you with a dead gate.
- Binding swing arms and bent brackets. Heavy snow loads push against gates that the operator is still holding in position. When a plow throws snow against a Mighty Mule swing arm, the bracket bends or the arm shears. We repair or replace the arm, reinforce the bracket, and realign the travel so the motor isn’t fighting its own hardware.
- Limit switches and magnetic lock sensors drifting out of adjustment. Post heaving after a wet winter changes the gate’s arc. The operator reverses mid-travel or refuses to latch because its reference points no longer match reality. We re-set the post, re-align the gate, and re-adjust the switches to the new geometry.
- Solar-charged battery systems underperforming in winter. At Crestline’s elevation, short winter days and cold temperatures leave Mighty Mule solar kits with low-voltage faults and random stops. We test the panel output, check battery health, and often recommend a larger panel or a hardwired backup for properties that see weeks of cloud cover.
- Warped wood gates that fight the operator. Many Crestline homes have custom wood gates on long hillside driveways. Snow moisture warps the wood, and the gate binds against the post or the ground. We adjust hinges, trim or re-hang the gate, and make sure the Mighty Mule opener isn’t burning itself out pushing a gate that no longer fits its opening.
Mighty Mule Service in Crestline: What Local Conditions Mean for Your Equipment
Here’s what flatland Mighty Mule pages won’t tell you: Crestline’s winter snowpack and spring ground settlement are hard on these swing operators because the gate posts move while the control box stays fixed. When the hinge post heaves even an inch out of plumb, the arm geometry goes out of spec and the operator strains or faults, even when the motor itself is fine. After a heavy snowpack winter, the ground shifts and settles enough that swing gates on hillside driveways stop latching entirely. We see a run of Crestline Gate Repair realignment and hinge-repair calls every spring, and the fix is usually not a new motor. It’s resetting the post, bracing it, and re-adjusting the arm and limit switches to the operator’s new reality. If your Mighty Mule gate is acting like it’s failing but the motor sounds strong, the problem is probably in the ground beneath the post. Ruben’s signature line applies here: if your gate isn’t opening the way it should, there’s a reason, and guessing at it isn’t a repair strategy.
Mighty Mule Models & Products We Service in Crestline
We repair the Mighty Mule equipment Crestline homeowners actually have: FM-series swing gate openers including the FM350, FM500, and FM600; MM-series automatic gate openers like the MM260, MM360, and MM560; slide gate openers in the MMS100 and MMS200 lines; and solar and battery-backup kits for remote mountain properties where running AC power isn’t practical. Our approach to parts is simple: OEM Mighty Mule control boards, battery harnesses, and gear assemblies when they’re the best value, and quality aftermarket actuators, hinges, and brackets when they’ll hold up better in Crestline’s snow and freeze-thaw conditions. We stock common Mighty Mule in Lake Arrowhead boards and harnesses locally so a Crestline repair doesn’t wait on a parts shipment when your gate is stuck closed. We’re an independent gate repair company. We are not authorized by Mighty Mule, not partnered with them, and not endorsed by them. We just know their equipment.
See the difference
Before
After
Before
After
Before
AfterMighty Mule Service Pricing in Crestline
Service calls for Mighty Mule repair in Crestline typically start with a diagnostic visit that we quote before we come out. What you’ll pay depends on what we find: a control board replacement usually runs $150 to $350 including the board, a battery harness replacement runs $80 to $180, and a full arm or bracket assembly with realignment falls between $200 and $450. Posts that need re-setting and bracing add more, because that work requires digging, bracing, and re-compacting the soil around the post. Every estimate is free, and we quote and agree on the full price before any work starts. There’s no invoice surprise at the end. Call (833) 545-6817 for an exact quote on your Mighty Mule gate in Crestline.
Serving Crestline, CA — Our Local Coverage Area
We’re based in the Crestline area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mighty Mule Gate Repair in Crestline
The ground under your hinge post moved. Snowmelt saturates the soil, the freeze-thaw cycle heaves it, and the post tilts just enough that the gate’s latch no longer lines up. The operator is usually fine. We reset the post, brace it, and realign the gate so it latches cleanly. Call (833) 545-6817 for a free assessment.
Often not as installed. A single factory panel sized for sunny flatland lots will underperform at Crestline’s elevation with short daylight hours and cold batteries. We test the panel output and battery health, and for most mountain properties we recommend a larger panel or a hardwired backup to keep the operator from dropping into low-voltage faults mid-cycle.
Usually not. A corroded board or battery harness on a Mighty Mule opener with a sound motor and a straight gate frame is a straightforward repair. We replace the board or harness and you’re back in service for a fraction of the cost of a new opener. We’ll tell you honestly if the opener is rusted out and replacement is smarter than patching.
Snow load against the gate leaf bends swing arms and brackets, while plowed snow shoved against the gate can shear the arm or strip the gear. The operator is holding position while the gate gets pushed, and something has to give. We repair the mechanical damage, reinforce the bracket, and adjust the travel so the Mighty Mule service in Muscoy cycles like it should.
Yes. Mighty Mule keypads, intercoms, and phone entry modules all wire into the same control board we’re already diagnosing. We test, replace, or rewire the entry hardware as part of the gate repair. Call (833) 545-6817 and tell us what your entry hardware is doing, or not doing.
Service Areas Near Crestline
Beyond Crestline, we handle Mighty Mule gate repair across the nearby mountain and foothill communities. If you’re in Chino or Los Serranos, Ontario or Montclair, or over in Pomona or Claremont, we’ve covered Mighty Mule systems in those neighborhoods too. For Mighty Mule sales & service across the broader range, our techs work the same way everywhere: diagnose first, quote before work starts, and fix it so it holds. You can also see our Crestline service area page for more local detail, or check out Mighty Mule service in Mission Viejo and Mighty Mule service in Highland if you’re closer to those areas.
Book Your Mighty Mule Service in Crestline Today
If your Mighty Mule gate is acting up in Crestline, call Wrought Gate Repair at (833) 545-6817 for a free estimate. We’ll get eyes on your opener, tell you exactly what’s wrong, and give you a price before we turn a wrench.
Written by Ruben Castellano, Owner at Wrought Gate Repair, serving Crestline and the San Bernardino Mountains.