Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Chino, CA
Gate installation in Chino runs about $2,800 – $9,500 depending on whether you need a single swing gate on a ranch driveway or a sliding security gate on a commercial yard off the 60/71 corridor. We install manual and automated gates across Chino’s three very different markets: the aging horse properties west of Euclid, the HOA-governed tracts in College Park and The Preserve, and the industrial yards along Chino Avenue and Merrill. Every job starts with a free site measure and a written quote, and we never start work until you approve the number. Call (833) 545-6817 to schedule yours.
Why Chino Homes Are Different
Chino is not a single housing market, and gate work here reflects that split. The western and southern edges of town still hold working equestrian parcels and former dairy land, where driveway gates are often decades-old custom steel or wrought iron hung on posts that have shifted through years of dry-season contraction and winter rain. Those gates typically open with a chain loop and a slide bolt, not a motor, and the owners usually want them repaired rather than replaced. The salty, dusty wind that moves across the former dairy flats accelerates rust on galvanized frames, so we see hinge and weld failures earlier here than in neighboring cities.
East of Euclid, Chino looks nothing like that. College Park and The Preserve are master-planned communities with HOA architectural committees, which means decorative courtyard gates and pedestrian entry gates must match the approved style and finish. Homeowners there tend to call us after a contractor installs a gate that the board flags, or when an operator from a production builder stops working a year or two in. Industrial clients along the 60/71 corridor need something else again: heavy sliding cantilever gates, chain-link frames, and operator systems that cycle dozens of times a day. One gate company has to be fluent in all three.
Styles & brands we work with
Our Main Chino Services
Most Chino calls come in for one of two problems: a gate that won’t open or close properly, or an automated system that stopped responding. Both services have dedicated Chino pages, and both are covered below.
Gate Repair in Chino
We repair the gate itself: bent frames and sagging top rails, seized hinges, broken welds, cracked post foundations, and latch or slide-bolt failures. On Chino horse properties this often means straightening a twenty-year-old tube-steel ranch gate and resetting the posts in concrete. On newer tract homes it’s more often a courtyard gate that drags on the pavers or a pedestrian gate that won’t latch. We work exclusively on gates, so the diagnosis is usually fast and the repair is done with the right equipment on the truck. Gate Repair in Chino covers this in detail.
Electric Gate Repair in Chino
When a motorized gate grinds, beeps, moves halfway, or stops responding to the remote, the problem is almost always in the operator, the safety sensors, the circuit board, or the alignment of the gate itself. We service nine automation brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so you don’t have to chase down a brand-specific dealer. In Chino, Santa Ana wind events bend operator arms and knock photo sensors out of alignment more than anything else. Electric Gate Repair in Chino walks through the full diagnostic process.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Chino
Gate installation in Chino means different things depending on which side of town you’re on. A horse property off Euclid usually needs a wide driveway swing gate with a heavy post set and a manual latch the owner can work from horseback or a truck. A College Park or Preserve home more often needs an HOA-approved pedestrian or courtyard gate, sometimes with a low-voltage intercom or keypad. We measure, build or order the gate, set the posts, hang it, and if it’s automated we run the power, mount the operator, and set the travel limits and safety edges. The full process and all our options live on the Gate Installation hub, but the short version is this: one company, one quote, and the price is agreed before anything is fabricated or installed.
Automatic Gate Installation
Signs you need it
You want remote or keypad entry on a driveway, or you’re tired of getting out of the car to open a manual gate at night.
What it costs in Chino
Automatic gate installation in Chino typically runs $3,500 – $8,000, with the higher end covering sliding operators and long power runs.
How we do it
We survey the driveway and power access, fabricate or order the gate, set and cure the posts, mount the operator and arms, run the electrical, and program remotes, keypads, and safety loops before testing every cycle.
Driveway Gate Installation
Signs you need it
Your driveway opening is wide enough for a gate but currently has nothing, or the old one is too rusted and bent to repair economically.
What it costs in Chino
Driveway gate installation in Chino usually lands between $2,800 and $7,500, depending on gate material, width, and whether we’re adding an operator.
How we do it
We confirm property lines and utility locations, pour or reinforce post footings, hang the gate on adjustable hinges, and align the latch and stops before walking you through the finished product.
Sliding Gate Installation
Signs you need it
Your driveway slopes toward the street or you don’t have the swing clearance, which makes a cantilever or track-style sliding gate the working answer.
What it costs in Chino
Sliding gate installation in Chino typically costs $5,500 – $9,500 because it requires a steel rail, rollers, a receiver post, and usually an operator.
How we do it
We set the track or cantilever rollers, build the picketed steel frame to clear the driveway, mount the receiver and stops, and if it’s powered we wire the operator and set the travel limits and safety edges.
What Gate Installation Costs in Chino
| Item | Typical range in Chino |
|---|---|
| Manual driveway swing gate, installed | $2,800 – $4,500 |
| Automatic gate system with operator | $3,500 – $8,000 |
| Sliding or cantilever gate with operator | $5,500 – $9,500 |
What moves the number: gate width, whether we’re trenching power across a long Chino driveway, and the finish the HOA requires. Every quote is written, itemized, and agreed before we order materials or start digging.
Can you install a gate that matches my HOA’s approved style?
Yes. We install gates in College Park and The Preserve regularly and build to the architectural committee’s approved finish and hardware spec. Bring us your HOA’s gate standard and we’ll quote exactly to it.
Do you handle the power run and the safety edges on an automatic gate install?
Yes, that’s all part of one quote: the power run, the operator, the safety edges, photo sensors, and keypad or remote programming. We don’t hand you off to an electrician; your gate leaves us working and tested.
Brands We Service in Chino
We work on FAAC, BFT, Linear, and Viking systems every week in Chino, along with the rest of our nine-brand lineup. We stock common boards, arms, and safety edges for these brands, and most Chino repair calls are diagnosed and fixed in one visit. For the full list and what each brand is known for, see our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Chino, CA
| Service | Typical range in Chino |
|---|---|
| Manual gate realignment and rehang | $350 – $900 |
| Weld repair on steel or wrought iron frame | $250 – $600 |
| Hinge or latch replacement | $180 – $450 |
| Post reset in concrete | $500 – $1,200 |
| Operator arm or limit switch replacement | $300 – $700 |
| Circuit board replacement | $400 – $1,000 |
| Safety sensor or photo eye replacement | $200 – $500 |
| Manual driveway swing gate, installed | $2,800 – $4,500 |
| Automatic gate system with operator | $3,500 – $8,000 |
| Sliding or cantilever gate with operator | $5,500 – $9,500 |
Chino prices run higher when the gate is on loose sandy soil that needs deeper footings, when rust from the former dairy flats has spread into the frame, or when an HOA finish spec adds powder coating. Whatever the job, our quote is fixed upfront and we don’t start the work until you approve it.
Neighborhoods We Serve in Chino
We cover the whole city, and our Chino response is typically same-day or next-day for repair work. The neighborhoods we work in most often:
- The Preserve
- College Park
- Chino’s equestrian and ranch parcels near Euclid and Pine
- Industrial yards along Chino Avenue and Merrill
- Older single-family streets south of the 60
Service Area – Cities Near Chino
Wrought Gate Repair has served Chino since 2012, and we take the same truck and the same gate-only focus into the neighboring communities. We regularly work across Los Serranos, CA, Ontario, CA, Montclair, CA, and Eastvale, CA. Same crew, same fixed pricing, same nine-brand coverage.
Serving Chino, CA — Our Local Coverage Area
We’re based in the Chino area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Chino
Most Chino repair calls are scheduled same-day or next-day, depending on the time of the call and where you are in the city. We keep repair parts for the nine brands we service on the truck, so the first visit is usually the fix, not the diagnosis.
Replacing an existing gate with a new gate in the same location generally doesn’t require a permit, though permanent electrical work on an automated gate may. Your HOA’s design review is the more common hurdle in College Park and The Preserve. We’ll tell you exactly what applies to your job before we quote.
Yes. We quote to the HOA’s specification, adjust the finish and hardware to match the approved style, and wait for the board’s sign-off before fabrication. That sequencing keeps you out of a compliance fight and gets the gate done right the first time.
For a free Chino gate estimate, call (833) 545-6817. We’ll measure, diagnose, and quote the job before any work begins.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Chino Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Maria Rodriguez"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Priya Mehta"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Jasmine Coleman