Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Claremont, CA
Gate installation in Claremont usually runs between $1,800 and $7,500 depending on whether you’re replacing a rotted wooden garden gate on a Craftsman bungalow or automating a driveway gate on a newer development north of Baseline. We’re Wrought Gate Repair, and we work exclusively on gates, which means the crew that shows up at your Claremont home spends every working day on hinges, posts, actuators, and track systems rather than splitting time across fencing or garage doors. Call (833) 545-6817 for a free estimate on any gate project in Claremont.
Why Claremont Homes Are Different
Claremont’s identity as the City of Trees is more than a nickname. It shapes the gate work we do every week. The mature street canopy that lines the historic tracts near the Claremont Colleges drops leaves, seed pods, and small branches onto gate tracks and hinge areas year-round, and root growth from those same trees pushes against gate posts just enough to throw latches out of alignment after a wet winter. We regularly see gates on Indian Hill Boulevard and the residential blocks around Memorial Park that won’t latch because the post has drifted a quarter inch, not because the latch itself failed.
The housing stock compounds this. Claremont mixes early-1900s Craftsman bungalows and Spanish Revival homes with mid-century ranch houses and newer planned communities to the north and east. That means we’re repairing hand-forged wrought iron gates on a 1920s Village property in the same week we’re installing a modern automatic driveway gate in a newer subdivision near the 210 corridor. The older ornamental gates need a different hand than the newer powder-coated steel systems. You can’t treat them the same way, and we don’t.
The climate adds another layer. Claremont sits in the hot, dry inland stretch east of Los Angeles, so summer sun bakes wooden gates until they warp and split, while Santa Ana wind events yank on hinges and stress weld points on metal gates. A gate that’s been fine for years suddenly sags after one bad wind season. That’s a normal Claremont call for us.
Styles & brands we work with
Our Main Claremont Services
Most Claremont homeowners reach out to us for one of two reasons: a gate that’s sagging, sticking, or falling apart, or an electric gate opener that’s stopped responding. Here’s what each service looks like in this city specifically.
Gate Repair in Claremont
Manual gate repair in Claremont often means salvaging something with real character. Wooden driveway and garden gates on pre-war homes near the Colleges develop rot at the bottom rail where sprinkler overspray keeps the wood damp, and wrought iron gates from the same era need hinge rebuilds after decades of sun and wind exposure. We assess whether the post, the hinge, or the gate frame itself is the failure point, then repair rather than replace whenever the existing gate is worth saving. On newer vinyl and metal gates toward the north end of town, the work leans more toward latch realignment and track cleaning. Gate Repair in Claremont covers everything from a single hinge replacement to a full gate rebuild.
Electric Gate Repair in Claremont
Automated gates fail differently in Claremont than they do closer to the coast. The dry heat and wind stress circuit boards, degrade capacitor health, and push opener arms out of adjustment, while the tree debris problem jams slide gate tracks more often than you’d expect. We diagnose and repair all nine automation brands, so whether your Claremont property runs a FAAC swing actuator, a LiftMaster slide operator, or a Mighty Mule on a residential driveway gate, one call covers it. Electric Gate Repair in Claremont handles diagnostics, sensor alignment, board replacement, and full opener swaps when needed.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Claremont
New gate installation in Claremont is rarely a generic swap. The mix of historic homes near the Colleges and newer builds north of Foothill means every job starts with the same question: what style, material, and automation level fits this specific property? A Spanish Revival home on a tree-shaded street usually calls for a wrought iron driveway gate that matches the period, while a mid-century ranch home might want a horizontal slat wood gate that can take the sun without warping. We install manual and automated gates across both ends of that spectrum, and we’re the same crew whether the job is a simple garden gate or a full sliding driveway system with safety edges and a keypad. See our full Gate Installation service for details on materials and process.
Driveway Gate Installation
Signs you need it
A driveway gate that sags, scrapes, or needs a rebuild is often cheaper to replace, especially when the post footings have shifted from tree root pressure.
What it costs in Claremont
Driveway gate installation in Claremont typically runs $2,800 to $7,500 depending on material, width, and whether automation is included.
How we do it
We pull measurements on site, check post integrity and grade, remove the old gate, set or reinforce posts, and hang the new gate with hinges rated for its weight before adjusting the latch and stops.
Sliding Gate Installation
Signs you need it
A sliding gate makes sense when a driveway slopes up from the street or lacks swing clearance, which happens often on older Claremont lots with narrow frontages.
What it costs in Claremont
Sliding gate installation in Claremont generally falls between $3,500 and $8,500 including the track, rollers, and gate panel.
How we do it
We lay out the track line, pour or repair the concrete pad, set the track and rollers, hang the gate panel, and test full travel before adjusting the catches and guides.
Automatic Gate Installation
Signs you need it
You’re tired of stepping out of the car to open the gate, or you want controlled access without replacing a gate that’s still structurally sound.
What it costs in Claremont
Automatic gate installation in Claremont costs between $2,500 and $9,000 depending on operator type, gate weight, and access control additions.
How we do it
We match the operator to the gate’s weight and cycle frequency, mount the actuator or arm, run power and safety edges, and program remotes and code the keypad on site.
Electric Gate Installation
Signs you need it
You have a manual gate you’d like to automate, or an old opener that’s failed and can’t be economically repaired.
What it costs in Claremont
Electric gate installation in Claremont starts around $2,800 and runs to $8,500 for a full system with safety sensors and keypad entry.
How we do it
We verify the gate swings level and freely, install the operator and safety edges, run the low-voltage wiring, and test the full cycle before handing over remotes.
What Gate Installation Costs in Claremont
| Item | Typical range in Claremont |
|---|---|
| Manual driveway gate (single swing) | $1,800 – $4,500 |
| Automated driveway gate with opener | $2,800 – $7,500 |
| Sliding gate system | $3,500 – $8,500 |
Does Claremont require a permit for gate installation?
Most residential gate replacements in Claremont don’t trigger a permit, but automated driveway gates within certain setbacks can require review. We check your specific property’s requirements during the estimate, and the price we quote is the price you pay before any work starts.
How long does a gate installation take in Claremont?
Most Claremont gate installations finish in one to two days once materials are on hand, though custom wrought iron gates can take two to three weeks to fabricate. We schedule the full job in advance and don’t leave a half-finished gate at the curb. Call (833) 545-6817 for an exact quote.
Brands We Service in Claremont
We service FAAC, BFT, Linear, and Viking automation systems in Claremont, along with five other major gate opener brands. We keep common boards, sensors, and receiver parts in local stock, which means many Claremont automation repairs are done in a single visit rather than waiting on a shipped part. Our brands page covers the full lineup.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Claremont, CA
| Service | Typical range in Claremont |
|---|---|
| Gate repair (hinge, latch, alignment) | $180 – $600 |
| Wood gate rebuild or section replacement | $400 – $1,500 |
| Wrought iron gate repair and repaint | $450 – $1,800 |
| Electric gate diagnostic | $120 – $300 |
| Opener arm or actuator replacement | $600 – $1,800 |
| Control board replacement | $450 – $1,400 |
| Safety sensor and edge replacement | $250 – $700 |
| Manual driveway gate installation | $1,800 – $4,500 |
| Automated driveway gate installation | $2,800 – $7,500 |
| Sliding gate installation | $3,500 – $8,500 |
Prices in Claremont push toward the higher end when a gate is custom-sized for an older, non-standard opening near the Village or when tree root work has to happen before post setting. Whatever the number, we quote it up front and you approve it before any work starts.
Neighborhoods We Serve in Claremont
We cover all of Claremont, from the historic blocks around the Claremont Colleges and the Village to the newer subdivisions north of Baseline and east of Towne Avenue. Response time for repairs in Claremont is typically same-day or next-day depending on call volume, and we schedule installations within the week in most cases.
- The Village and College area
- Memorial Park and Indian Hill neighborhoods
- North Claremont near Baseline
- Claremont Hills and Padua Avenue corridor
- Stone Canyon and the east side near the 210
Service Area – Cities Near Claremont
Our trucks run daily from Chino and cover the neighboring communities where Claremont homeowners and property managers often have additional properties or referrals. We serve Montclair, CA just west of Claremont, La Verne, CA to the northwest, Upland, CA to the east, and San Antonio Heights, CA at the base of the foothills. If you own a rental or commercial property in one of these areas, the same crew handles it.
Serving Claremont, CA — Our Local Coverage Area
We’re based in the Claremont area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Claremont
Most Claremont gate repairs are scheduled same-day or next-day, and gate emergencies like a stuck-open automated gate get prioritized. We carry common parts for the nine brands we service, which is why single-visit repairs are the norm rather than the exception here.
Yes. Many Claremont HOAs, especially in the newer north side developments, have design and finish requirements for driveway gates. We work from those specs when they’re provided and can match the style, color, and material your HOA board has already approved, which keeps your install from getting flagged after the fact.
Always. We measure on site, confirm the scope, and hand you a written number before any work begins. That number doesn’t change unless you add something to the job, and even then we quote the addition first. Call (833) 545-6817 to set up a free estimate.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Claremont Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Adam Sutton"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Norma Reyes"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Emily Chen