Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in San Antonio Heights, CA
Most driveways in San Antonio Heights are not simple asphalt turnoffs. They climb, curve, and end behind a gate that weighs anywhere from 400 pounds to well over a ton. Wrought Gate Repair handles Gate Installation here with that reality in mind: grade changes, masonry piers built in the 1970s, and automatic operators that need to hold up to Santa Ana wind loads and triple-digit summer heat. Whether you need a new sliding estate gate on a retaining-wall track or a full automatic swing setup on a half-acre hillside lot, we are the gate-only crew you call at (833) 545-6817.
Why San Antonio Heights Homes Are Different
San Antonio Heights is a foothill equestrian community pressed against the San Gabriel Mountains, and the housing stock reflects it: detached single-family homes on half-acre-plus lots, many built between the 1950s and 1990s, with long private driveways and masonry piers that predate modern automation. The grading is the real variable. Driveways slope, retaining walls hold back hillsides, and gates run on tracks bolted into concrete that has shifted over decades. What works on a flat Upland lot often fails two hundred feet up the grade.
The climate punishes gates in specific ways. Santa Ana wind events hit the foothills hard, slamming heavy gate leaves against stops, bending hinge pins, and overworking operator arms. Summer heat bakes control boards inside metal housings, and dry air pulls moisture out of wood gate panels until they crack at the stiles. Add in the wildland fire zone reality – many San Antonio Heights properties back directly onto national forest – and a gate that will not open becomes more than an inconvenience. Some are wired to fail open for emergency access, and a stuck-closed gate can put a homeowner on the wrong side of code enforcement. We work on gates here with that context built in.
Styles & brands we work with





Our Main San Antonio Heights Services
Two types of calls dominate in San Antonio Heights: mechanical failures on heavy estate gates and electrical problems on the operators that move them. Here is what each service covers in this area specifically.
Gate Repair in San Antonio Heights
Mechanical gate repair here usually means one of three things: a sliding gate that has jumped its track on a sloped driveway, a swing gate that sags because the hinge posts have moved inside old masonry piers, or a latch system that no longer holds against wind. We straighten, reinforce, replace hardware, and re-hang gates so they move freely without dragging. On properties where a gate has been in place since before the current owner bought the home, we check the entire load path from post to leaf to catch the failures that are still a year out. Gate Repair in San Antonio Heights is the page with full pricing and sub-job detail.

Electric Gate Repair in San Antonio Heights
Electric gate problems in San Antonio Heights skew toward operator boards cooked by heat, limit switches knocked out of position by wind-driven gate movement, and safety edges that have degraded under direct foothill sun. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, which means we rarely have to tell a homeowner to track down a brand-specific dealer. When an automatic gate stops mid-cycle on a steep driveway, we troubleshoot the full chain: power, board, motor, arm, sensor. Electric Gate Repair in San Antonio Heights covers that work in depth.

What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in San Antonio Heights

New gate installation in San Antonio Heights almost always starts with the driveway itself. The approach is sloped, the gate has to be heavy enough to handle wind, and the automation has to survive mountain-adjacent heat cycles that shorten the life of cheap control boards. Whether you are replacing a 1980s chain-link slider or building out a new automatic driveway gate on a custom hillside property, the job has to be planned for this terrain. Here is exactly what we install and what it costs in this community. Our full installation scope lives on the Gate Installation service page.
Automatic Gate Installation
Signs you need it
You are opening and closing a heavy gate by hand multiple times a day, or the property has a manual gate that fails the fire-access requirements common in San Antonio Heights.
What it costs in San Antonio Heights
Automatic gate installation in San Antonio Heights typically runs $3,500 to $9,000 depending on operator type, gate weight, and whether the driveway needs solar or a long power run.
How we do it
We measure the gate leaf and post condition, match an operator to the actual weight and wind load, set the arm or rack, run power or mount solar, and program limits and safety edges before testing full cycles.
Sliding Gate Installation
Signs you need it
Your driveway is too steep for a swing gate to clear, or the existing slider has worn the track and wheels to the point that it grinds and binds every cycle.
What it costs in San Antonio Heights
Sliding gate installation in San Antonio Heights typically runs $4,000 to $12,000, with heavier cantilever designs on hillside lots at the upper end of that range.
How we do it
We set or rebuild the track rail, mount the gate on new rollers, square the leaf to the driveway grade, and install the operator rack with an eye toward drainage so the track does not sit in runoff.
What Gate Installation Costs in San Antonio Heights
| Item | Typical range in San Antonio Heights |
|---|---|
| Manual driveway gate installation (single leaf) | $1,500 – $4,000 |
| Automatic gate installation (operator, gate, hardware) | $3,500 – $9,000 |
| Sliding gate installation (full system) | $4,000 – $12,000 |
Sloped driveways and long power runs are the two main things that push San Antonio Heights installs toward the upper end of those ranges. Every price is quoted and agreed before any work starts, so the number you approve is the number you pay.
How long does gate installation take in San Antonio Heights?
Most residential driveway gate installations in San Antonio Heights take two to four days, including post setting, concrete curing, operator wiring, and final safety testing. Custom hillside gates with retaining-wall work can add a day or two.
Do you handle the permits for gate installation in San Antonio Heights?
We build to code and flag anything that needs county sign-off before work begins. Wildland fire zone requirements around automatic gate fail-open behavior are part of how we plan installs here, not an afterthought.
Brands We Service in San Antonio Heights
We carry parts and replacement boards for FAAC, BFT, Linear, and Viking systems, among the nine major brands we service. If your San Antonio Heights gate has one of these operators and the board fails, we can usually source the replacement in days, not weeks. Our brands page lists the full lineup and what we stock.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in San Antonio Heights, CA
| Service | Typical range in San Antonio Heights |
|---|---|
| Gate repair (mechanical, manual gate) | $150 – $650 |
| Electric gate repair (operator troubleshooting) | $200 – $900 |
| Gate opener motor replacement | $500 – $1,500 |
| Control board replacement | $300 – $800 |
| Gate hinge and post repair | $200 – $700 |
| Track and roller replacement (sliding gate) | $400 – $1,200 |
| Safety sensor and loop replacement | $250 – $750 |
| Automatic gate installation | $3,500 – $9,000 |
| Sliding gate installation | $4,000 – $12,000 |
| Manual driveway gate installation | $1,500 – $4,000 |
San Antonio Heights pricing runs higher than flatland suburbs for two reasons: driveway grades require more shimming, reinforcing, and custom fabrication, and many of these gates are heavy custom wrought iron that was never designed for automation. Whatever the job, the price is agreed in writing before work begins.
Neighborhoods We Serve in San Antonio Heights
We work across the full 91784 area, from Euclid Avenue estates down to the newer custom builds on the upper foothill roads. Typical response for a repair call in San Antonio Heights is same-day or next-day, depending on how early you reach us. We know these streets by their hills, not just their addresses.
- Upper Euclid Avenue corridor
- Mountain View Drive and adjacent hillside streets
- North San Antonio Avenue estate lots
- Thompson Creek area properties
- Amethyst Street and surrounding foothill roads
Service Area – Cities Near San Antonio Heights
Wrought Gate Repair works throughout the foothill communities that surround San Antonio Heights. We handle gate jobs in Upland, CA regularly, along with Claremont, CA to the west, Rancho Cucamonga, CA to the east, and Montclair, CA just south. Wherever the driveway climbs, we are the crew that understands what the grade does to a gate.
Serving San Antonio Heights, CA — Our Local Coverage Area
We’re based in the San Antonio Heights area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in San Antonio Heights
We schedule repair calls in San Antonio Heights same-day when you reach us before mid-morning, and next-day for most other calls. If a gate is stuck closed and it is a fire-zone property with emergency access requirements, tell us when you call and we will prioritize it.
Some San Antonio Heights properties fall under HOA covenants that govern gate style, height, and even automation type. Check your CC&Rs before changing a gate design or adding an operator. We can work from your HOA’s spec sheet and build to whatever the board has already approved.
We service FAAC, BFT, Linear, Viking, LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your operator is one of these nine brands, we can diagnose and repair it without sending you to a brand-specific dealer. Call (833) 545-6817 and tell us what operator you have.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What San Antonio Heights Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Colleen Rhodes"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Adam Sutton"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Norma Reyes