Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Fontana, CA
Gate installation in Fontana usually costs between $1,800 and $7,500 depending on the gate material, automation package, and the condition of the existing posts and surrounding block wall. Most of the driveways we work on in Fontana were built between the 1960s and 1980s, which means the gate posts are often leaning, the concrete is cracked, and the wall caps are ready to be replaced along with the gate itself. If you’re looking for a gate company in Fontana that handles the full job, from setting new posts to wiring the operator, call (833) 545-6817 for a free estimate.
Why Fontana Homes Are Different
Fontana’s housing stock is mostly single-story stucco tract homes built on oversized lots, and those lots were designed for a very particular Inland Empire life: boat parking, RV storage, extra cars, and a gate that keeps all of it out of sight. In ZIPs 92335 and 92337 especially, we work on wrought-iron driveway gates that have been swinging on the same hinges for forty and fifty years. The hardware doesn’t rot like it would at the coast, and it doesn’t rust like it does in a fog belt. What kills a Fontana gate is heat and dust. Summer temperatures over 100°F cook the lubricant out of hinges and rollers, and the Santa Ana winds that barrel through the Cajon Pass blow fine grit into every moving part. That’s why a gate in Fontana will seize, grind, or sag in ways a gate in Chino Hills or Rancho Cucamonga won’t, even if the two gates look identical from the street. The other thing that sets Fontana apart is the block wall. Most homes here have CMU perimeter walls with a gate hung between two masonry columns, and the gate post is often set into a wall cap that’s cracked or spalling. When the wall cap moves, the gate moves with it. We spend as much time re-setting posts and rebuilding wall caps in Fontana as we do replacing hinges.
Styles & brands we work with
Our Main Fontana Services
Most Fontana homeowners and property managers call us for one of two reasons: the gate won’t open, or the gate won’t stay where it’s supposed to. Here’s how each service works in this city.
Gate Repair in Fontana
Gate repair in Fontana usually means a sagging wrought-iron driveway gate, a pedestrian gate that drags on the concrete, or a latch that no longer lines up with the post. The heat and dust here accelerate hinge wear, so a hinge that would last twenty years near the ocean might last eight in Fontana. We work exclusively on gates, which means our trucks carry gate-specific hardware, not fence pickets and not garage door springs. When we repair a gate in Fontana, we check the post, the wall cap, the hinge pins, the latch alignment, and the stop. Full details are on the Gate Repair in Fontana page.
Electric Gate Repair in Fontana
Electric gate repair in Fontana is its own discipline. An automated driveway gate on a 1970s Fontana lot has likely gone through two or three openers by now, and the heat fries control boards faster than anything else. Santa Ana winds also throw swing gates out of limit, which makes the operator work against the wind load and can burn out a motor in a season. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, so most Fontana homes don’t need a brand-specific dealer. Read the full breakdown at Electric Gate Repair in Fontana.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Fontana
Gate installation in Fontana is a different job than it is in a newer master-planned community. Most of the driveways here are wide, flat, and built for RVs, which means the gate is heavy, the span is long, and the posts take real wind load from the Santa Anas. We set posts into new concrete, build the gate to match the existing block wall, and wire the operator so it handles the wind and the heat. This is the full service line from Gate Installation, and below is what a Fontana job typically involves.
Driveway Gate Installation
Signs you need it
Your existing driveway gate sags more than an inch at the latch corner, the posts lean, or the gate has been welded once already and is cracking again at the same joint.
What it costs in Fontana
A new driveway gate in Fontana typically runs $2,200 to $6,800 installed, plus $800 to $2,500 more if you add an automatic opener.
How we do it
We remove the old gate and hardware, set new steel posts in concrete, build the gate to your opening, hang it with adjustable hinges, and set the latch and stop so it closes clean on the first try.
Automatic Gate Installation
Signs you need it
You’re tired of jumping out to open the gate every time, or you already have an opener that’s been unreliable and you want a system built for Fontana’s heat and wind.
What it costs in Fontana
Automating an existing or new driveway gate in Fontana runs $1,800 to $5,500 depending on the operator type, capacity, and whether we need to run new conduit for power.
How we do it
We mount the operator, run the low-voltage and line-voltage wiring to code, set the travel limits for your exact gate weight and wind exposure, and program all remotes and keypads on site.
Sliding Gate Installation
Signs you need it
Your driveway slopes up or back from the street, or you want a gate that doesn’t swing into your parking area but slides along the fence line instead.
What it costs in Fontana
A sliding gate in Fontana runs $3,100 to $7,500 installed, and most sliding gates we install here are automated from the start.
How we do it
We pour a concrete track or install a cantilever rolling system, set the guide posts, fabricate the gate to the opening, and adjust the rollers so the gate travels clean without binding in the dust and grit Fontana winds push into the track.
What Gate Installation Costs in Fontana
| Item | Typical range in Fontana |
|---|---|
| Driveway gate, single swing | $2,200 – $4,800 |
| Driveway gate, double swing or sliding | $3,100 – $7,500 |
| Automatic opener added | $1,800 – $5,500 |
How long does gate installation take in Fontana?
Most Fontana gate installations take one to two working days. Custom wrought-iron fabrication can add a week or so before we arrive, and concrete needs a day to cure before we hang the gate on it.
Do I need an HOA approval for a new gate in Fontana?
In north Fontana’s newer HOA communities in 92336, yes, you’ll typically need design review first because the gate has to match the approved streetscape. In the older tract-home areas of 92335 and 92337, there’s usually no HOA gate restriction, but call us at (833) 545-6817 and we’ll help you sort out what applies to your street.
Brands We Service in Fontana
We work on DoorKing, Elite, Mighty Mule, and LiftMaster systems daily in Fontana, and we stock the common control boards, limit switches, remotes, and receiver units for those brands on our trucks. If it’s an odd board or a discontinued part, we can usually have it in hand within two or three business days. See the full our brands list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Fontana, CA
| Service | Typical range in Fontana |
|---|---|
| Gate repair, general (hinges, latch, realignment) | $180 – $440 |
| Gate operator / automatic opener repair | $260 – $740 |
| Gate panel, chain-link, or picket replacement | $190 – $560 |
| Wrought-iron driveway gate, new single | $2,200 – $4,800 |
| Wrought-iron driveway gate, double or sliding | $3,100 – $7,500 |
| Automatic gate opener added to existing gate | $1,800 – $5,500 |
| Electric gate diagnostic visit | $90 – $180 |
| Post reset or wall cap rebuild | $280 – $610 |
In Fontana, two things push a gate price up faster than anything else: the width of the opening and the condition of the posts. Double gates and RV-width openings need heavier steel and stronger operators, and a post that has to be dug out and re-set adds real labor time. Every price we quote in Fontana is written down and agreed to before any work starts, so there is no surprise on the invoice.
Neighborhoods We Serve in Fontana
We run gate repair and installation calls across all of Fontana’s ZIPs, from the older tracts south of Foothill to the newer planned developments north of the 210. Here are a few of the areas we’re in regularly:
- Southridge
- Sierra Lakes
- Rancho Fontana
- Walnut Village
- Northgate
We can usually reach most Fontana addresses the same day, and we quote a specific arrival window when you book, not a four-hour spread.
Service Area – Cities Near Fontana
Wrought Gate Repair serves Fontana and the surrounding Inland Empire communities. We work regularly in Bloomington, CA, Rialto, CA, Glen Avon, CA, and Pedley, CA. If your gate is in Fontana proper or any of those nearby cities, one call covers the diagnosis, the repair, and any new gate installation.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Fontana
Most Fontana calls are same-day or next morning. Gate operator failures and gates stuck open are the ones we prioritize, because a gate that won’t close is a security problem, not just a nuisance. Call (833) 545-6817 and we’ll give you a real arrival window.
For standard gate repair, no permit is needed in Fontana. For new automated driveway gates and any electrical run, we pull permits when the scope calls for it, and we’ll coordinate with your HOA if you’re in a north Fontana community that requires design review.
We cover all of Fontana, including 92334, 92335, 92336, and 92337, plus the nearby cities listed in our service area. If your gate is within Fontana city limits, you’re in our service area.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fontana Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Jasmine Coleman"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— Marisol Flores"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Gilbert Delgado