Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Muscoy, CA | Wrought Gate Repair
We repair Ghost Controls solar and low-voltage swing and slide operators across Muscoy, and the work here rarely starts with the opener itself. Most calls on 92405 lots come down to a heavy, owner-built gate dragging on dirt because a post set shallow in sandy soil has shifted. We’re Wrought Gate Repair, an independent Ghost Controls service provider, not a manufacturer shop. Call (833) 545-6817 and we’ll tell you whether the operator is actually the problem or the post is.
Why Muscoy Residents Choose Us for Ghost Controls Service
Gates are the only thing we work on. Not fences, not garage doors, not general contracting. That narrow focus means the technician who shows up at your Muscoy property has already spent the day, and the week, and the year thinking about gate operators specifically. Ruben Castellano, our owner, learned the mechanical and electrical side of automated gates through the Industrial Technology program at Chaffey College, and he’s spent more than a decade since then on Inland Empire properties where the gate is heavy, the post is old, and the operator was bolted on long after the concrete cured. When a Ghost Controls unit misbehaves on a 1970s pipe gate, we’ve seen that exact combination before.
We also carry the parts that actually get these jobs done. Ghost Controls OEM control boards, arms, and battery assemblies when the factory part is what’s needed. Aftermarket brackets, heavy hinges, and post anchors when the gate itself is too far from factory spec for the stock hardware to hold. And call us at (833) 545-6817 for a straight assessment.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Muscoy
- Operator stalls mid-swing or trips its limits after a windy season. Santa Ana winds dry out the sandy soil Muscoy gates sit in, and a post that was barely deep enough shifts a few degrees. The Ghost Controls TDS2 or TSS1 unit gets blamed, but the arm is fighting geometry the controller was never tuned for. We re-set the post, re-hang the gate, then re-limit the operator.
- Solar or low-voltage control boards that brown out and reset in summer heat. Muscoy’s inland summers put real stress on aging batteries and shaded solar panels. The board resets mid-cycle and the owner thinks the motor died. We test the panel output, the battery health, and the board itself before replacing anything.
- Arm brackets and hinge welds cracking on field-built pipe or chain-link gates. Ghost Controls factory tube hardware assumes a straight, stiff frame. Many Muscoy gates were welded by a neighbor decades ago and have a little twist in them. We reinforce or replace the mounting hardware rather than forcing a fresh operator onto a compromised frame.
- Gate dragging on dirt or gravel after winter rains heave a post. Rain swells the sandy ground, a shallow-set post lifts, and the gate bottom catches. The operator strips its drive gear or burns the arm trying to move weight it was never sized for. We rebuild the post footing first, then repair the operator.
- Dead battery backups on solar systems. Ghost Controls solar packages rely on a healthy battery, and Muscoy’s temperature swings shorten battery life. A system that worked fine in October fails in January. We replace the battery assembly and inspect the panel wiring so the cycle doesn’t repeat in six months.
Ghost Controls Service in Muscoy: What Local Conditions Mean for Your Equipment
Muscoy is unincorporated San Bernardino County. No HOA. No city gate ordinance. What that means practically: the gates we service here were almost all built by the owner or a local welder, not dropped in by a tract developer with a spec sheet. Ghost Controls makes solid equipment, but their factory tube hardware assumes a certain gate geometry. On a hand-built pipe frame hanging from posts set shallow in sandy soil, that assumption fails. So we don’t just swap parts. We re-set posts in fresh concrete when they’ve moved, shim and straighten the frame where we can, and then tune the Ghost Controls operator to the gate that’s actually there, not the gate the manual expected. That’s the difference between a repair that holds and one that’s back to dragging within a season. If your gate isn’t opening the way it should, there’s a reason, and guessing at it isn’t a repair strategy.
Ghost Controls Models & Products We Service in Muscoy
We service the Ghost Controls lineup you’re most likely to find on Muscoy lots: the TDS2 Heavy-Duty Dual Swing kit, the TSS1 Single Swing standard-duty unit, the AXS1 single swing with tube-gate hardware, and the ARS solar-compatible swing operators. When a circuit board or arm needs replacement, we install Ghost Controls OEM parts where they’re available. For brackets, post anchors, and hinges on the hand-built gates common in this area, we use quality aftermarket hardware that actually fits the frame. On a 1940s to 1970s gate that’s still structurally sound, we’ll rebuild the post and keep your healthy operator in service before we ever suggest a full kit replacement. We also do hinge and post repair, electric gate repair, and battery backup work as part of the same service call. For everything Ghost Controls, see our Ghost Controls sales & service page.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Muscoy
Service calls in Muscoy generally land in the $95 to $145 range to get a technician on site and diagnose the problem. Control board replacement typically runs $180 to $340 with the part, limit switch adjustments $85 to $150, arm or bracket replacement $120 to $220, and battery or solar panel work $110 to $260 depending on the component. A full operator replacement on a Muscoy gate, including labor and the kit, usually falls between $850 and $2,100. The final number depends on whether we’re also re-setting a post or reinforcing the frame, which is common here. Every quote is agreed upon before any work starts. Call (833) 545-6817 for a free estimate and we’ll give you an exact number.
Serving Muscoy, CA — Our Local Coverage Area
We’re based in the Muscoy area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Muscoy
Usually not. The opener is almost always fine. What’s happening is the post has shifted in the sandy soil and the gate now sits lower than the operator expects. We re-set the post, get the gate swinging true, and then re-arm and re-limit the Ghost Controls unit. Call (833) 545-6817 and we’ll confirm before taking anything apart.
Because Muscoy is unincorporated San Bernardino County, gate work falls under county rules rather than a city ordinance. Most repairs, including re-setting an existing post in the same location, don’t require a permit. If we’re moving a post or installing a new automated gate, we’ll flag any county requirements before work begins so there are no surprises.
It will if the battery and panel are sized and placed correctly. The heat shortens battery life, and a panel that gets shaded part of the day won’t keep up. We check panel output and battery health as part of any solar system repair, and we’ll tell you if the issue is the panel location rather than the Ghost Controls board.
Yes, and that’s most of what we do in Muscoy. The factory hardware sometimes isn’t a clean fit on an older welded frame, so we use aftermarket brackets and anchors where the OEM parts would sit crooked or fail early. The operator gets tuned to the gate that’s actually there. Call (833) 545-6817 and we’ll walk the site and tell you what’s realistic.
The battery on solar systems, followed closely by the arm bracket where it connects to a gate that’s slightly out of straight. Both are accelerated by Muscoy’s heat and the hand-built gate frames common here. We stock both so most Ghost Controls service in Crestline and Muscoy repairs happen in a single visit.
Service Areas Near Muscoy
We serve Muscoy and the surrounding communities, including Chino, Los Serranos, Ontario, Montclair, Pompeii, and Claremont. If you’re in a neighboring area with a Ghost Controls opener that’s acting up, we can usually reach you the same week. See our Muscoy service area page for details, or compare with our Ghost Controls service in Foothill Ranch and Ghost Controls service in Stanton pages if you’re closer to those spots.
Book Your Ghost Controls Service in Muscoy Today
If your Ghost Controls opener is fighting a gate that won’t swing true, don’t wait for the next heat wave or rain to make it worse. Call (833) 545-6817 for a free estimate, and we’ll get a specialist to your Muscoy property fast.
Written by Ruben Castellano, Owner at Wrought Gate Repair, serving Muscoy since the days when most of these gates were first welded.