Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in San Clemente, CA | Wrought Gate Repair
Ghost Controls gate repair in San Clemente means diagnosing an operator that’s been living in salt air, fog, and HOA paint specs. We’re Wrought Gate Repair, an independent Ghost Controls service provider working across 92672, 92673, and 92674. What makes our Ghost Controls work here different is simple: we know the operator faults that develop specifically on coastal and hillside San Clemente properties, and we know which ones are actually the gate. If your Ghost Controls swing arm or slide operator is acting up, call (833) 545-6817 and we’ll figure out the real problem.
Why San Clemente Residents Choose Us for Ghost Controls Service
We work exclusively on gates. Not fences, not garage doors, not general contracting. Every Ghost Controls operator that comes across our bench gets the same treatment: the board gets inspected for moisture damage, the battery gets load-tested, the arm geometry gets checked against the gate’s actual weight and hinge condition. Ruben Castellano owns Wrought Gate Repair and has spent over a decade tearing into automated gate systems across Southern California, from Laguna Beach Ghost Controls service calls to plenty of Ghost Controls AS-series and TS-series units on San Clemente driveways. When a customer in Marblehead or Talega calls about a Ghost Controls operator that started reversing mid-cycle, we don’t guess. We check the terminal corrosion, the battery voltage under load, and the gate’s mechanical drag in that order, because in San Clemente that’s the order the problems usually stack up.
We carry genuine Ghost Controls boards, arms, and gear kits for units that justify repair, and quality aftermarket batteries and mounting hardware for consumables. No mystery boards, ever. And because we’re Ghost Controls sales & service specialists rather than a brand-authorized shop, we’re free to tell you the truth: sometimes the operator is fine and the gate is the problem. That honesty saves San Clemente homeowners real money.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in San Clemente
The Ghost Controls failures we see in San Clemente follow a pattern shaped by the coast, the fog, and the hills. Here are the five most common:
- Salt-corroded control board terminals. On properties in 92672 and 92673 where the marine layer sits on the gate every morning, moisture wicks past the weather seal on the operator housing and into the control box. The terminals pit, the board starts throwing intermittent faults, and the operator fails without a clear error code. We see this on Ghost Controls Swing Series and Slide Series units weekly.
- Limit and soft-stop faults after a homeowner resets the operator. A reset clears the travel limits, but if the gate’s casters or hinges have pitted and started binding in the coastal humidity, the operator re-learns bad geometry and faults again. The reset wasn’t the fix; the mechanical drag was always the issue.
- Battery and solar-charge failures during foggy stretches. San Clemente’s morning fog can sit for days, especially in spring and early summer. A Ghost Controls solar kit that works fine inland stops delivering enough charge here, the battery bank drops voltage, and the operator refuses to complete travel, especially on heavier ornamental-iron leaves. Replacing the battery without checking the panel’s actual output is a repeat-service call waiting to happen.
- Loosened mounting brackets after Santa Ana wind events. Hot, dry Santa Ana winds stress gate posts and hardware on exposed hillside lots. On Ghost Controls operators, a loosened arm bracket throws the arm out of geometry and trips the current-sensing obstruction logic. The operator thinks it’s hitting something. It isn’t; the bracket moved.
- Rusted swing-arm pivot hardware. On older decorative-iron driveway gates near the coast, the pivot points and hinge posts rust faster than the operator itself. The Ghost Controls arm then works harder to move a gate that’s mechanically resisting, which shortens actuator life and causes premature limit faults.
Ghost Controls Service in San Clemente: What Local Conditions Mean for Your Equipment
Here’s the thing about San Clemente that a generic Ghost Controls repair page won’t tell you: in Talega and the other master-planned hillside communities, the operator is only half the job. These HOAs enforce an approved gate color and style palette. If we mount a replacement Ghost Controls operator housing or bracket that doesn’t match the community’s specified finish, the homeowner gets a compliance notice. So before we mount anything, we match the approved palette. We keep common HOA finish specs on hand for Talega and Marblehead work, because a perfectly functioning operator with an off-color housing is still a failed inspection. That’s not true in a lot of neighboring cities—whether Ghost Controls in Ladera Ranch or elsewhere—it’s absolutely true here. The salt air is already working against the metal. We don’t need the architectural review board working against the homeowner too.
It also means our diagnostic order changes for San Clemente. Inland, you check the board first. Here, we check the battery, the terminal corrosion, and the mechanical drag on the gate itself before we condemn the electronics. Because on a foggy morning in 92672, a low-voltage Ghost Controls operator on pitted hinges looks exactly like a dead motor to a less specialized shop. And that misdiagnosis costs the customer a board they didn’t need.
Ghost Controls Models & Products We Service in San Clemente
We service the full Ghost Controls residential lineup: the Swing Series (AS-series single-swing operators), Dual Swing (AD-series for double driveway gates), and the Slide Series (TS-series sliding operators). We also work on Ghost Controls solar and battery-backup kits, keypad and remote accessory bundles, and the mounting hardware specific to each configuration. If your Ghost Controls unit is still in serviceable shape, we use genuine Ghost Controls boards, arms, and gear kits. For consumables like batteries and mounting bolts, we use quality aftermarket replacements. And when a San Clemente coastal operator is heavily salt-pitted, we’ll tell you straight whether repair or replacement makes sense, instead of replacing parts that will corrode again next season. On every Salt-pitted Ghost Controls operator, we give an honest repair-vs-replace recommendation before any work starts.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in San Clemente
Ghost Controls gate repair in San Clemente runs on a few variables: the failure point (board vs. battery vs. mechanical), whether we’re working on a coastal 92672 property with heavy corrosion or a hillside Talega gate that needs bracket realignment, and whether the operator is still serviceable. A control board replacement lands differently than a loose-arm realignment. A battery bank replacement on a fog-shaded solar setup is a different job than a hinge set on a small single-swing gate, or than Ghost Controls service in Laguna Hills where inland sun changes the diagnostic order.
Here’s what our pricing actually covers: we diagnose the gate and operator as one system, quote the repair before touching anything, and you approve that number before work starts. No surprises on the invoice. A free estimate means we come out, identify the actual fault, and give you a written price for the fix. If the operator isn’t worth saving, we tell you that too and quote a replacement that fits your San Clemente HOA’s finish requirements. Call (833) 545-6817 for an exact quote on your Ghost Controls repair.
Serving San Clemente, CA — Our Local Coverage Area
We’re based in the San Clemente area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in San Clemente
Usually the gate, or the operator’s power supply, or both. A Ghost Controls operator reversing mid-travel in San Clemente is typically reading excess current draw, which happens when pitted hinges and corroded casters make the gate mechanically harder to move, or when a low-voltage battery from fog-shaded solar panels starves the motor. The motor itself is rarely the first thing to fail. We test the mechanical drag and the battery under load before we ever condemn a board or motor, because on a coastal San Clemente gate the electronics are usually reacting to a mechanical or power problem, not causing one. Call (833) 545-6817 for a diagnostic visit.
We stock and install genuine Ghost Controls boards, arms, and gear kits for the Swing Series, Dual Swing, and Slide Series where the operator justifies the repair. For batteries and mounting hardware we use quality aftermarket parts, which keeps the repair cost down without touching the electronics with mystery components. We’re an independent shop, which means we’re not limited to a single supply channel, and we tell customers honestly when an aftermarket battery is the right call versus a genuine Ghost Controls board.
Because San Clemente’s marine layer cuts solar output for days at a time, and Ghost Controls solar kits sized for inland sun don’t always keep up here. The battery bank slowly loses charge, the operator reads low voltage, and it refuses to complete travel, especially on heavier ornamental-iron leaves. The fix starts with checking the panel’s actual output, not just swapping the battery. On fog-shaded coastal lots we often see panels undersized for the gate’s weight and the marine-layer reality. Call us at (833) 545-6817 and we’ll test the whole solar loop.
Yes. Talega, Marblehead, and several other San Clemente HOA communities enforce approved gate color and style palettes, and we match that palette before we mount any replacement operator housing, bracket, or visible hardware. An off-color Ghost Controls housing can trigger a compliance notice even when the operator works perfectly, so we treat the finish as part of the repair specification, not an afterthought. We keep common HOA finish specs on hand for San Clemente work.
The repair starts with checking the bracket, the mounting surface, and the arm geometry as one assembly. A loosened Ghost Controls arm bracket after a wind event throws the arm out of its original travel geometry, which trips the operator’s current-sensing obstruction logic and makes the gate stop or reverse. We re-secure the bracket, re-align the arm to the manufacturer’s travel specs, and verify the gate itself still moves freely through the full cycle. If the post itself shifted, the fix includes addressing that, not just tightening bolts that will loosen again. Call (833) 545-6817 for a free estimate.
Service Areas Near San Clemente
Wrought Gate Repair serves San Clemente and the surrounding South Orange County communities. If you’re nearby, we also provide Ghost Controls service in Chino and Ghost Controls service in Los Serranos. For a full picture of our San Clemente coverage, see our San Clemente service area page.
Book Your Ghost Controls Service in San Clemente Today
If your Ghost Controls operator isn’t opening the way it should, call (833) 545-6817. We’ll diagnose the gate and the operator as one system, give you a written price before any work starts, and handle the repair with the salt-air and HOA finish considerations San Clemente properties require. Ruben Castellano and the Wrought Gate Repair team know Ghost Controls, whether it’s Ghost Controls repair in Coto De Caza or right here in San Clemente, and they know this city.
Written by Ruben Castellano, Owner at Wrought Gate Repair, serving San Clemente and South Orange County.