Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Wildomar, CA | Wrought Gate Repair
We repair Ghost Controls gate operators throughout Wildomar, and most of the “dead motor” calls we get out here turn out to be battery, solar panel, or post-settling problems, not a bad board. Wildomar’s acreage properties run long driveway gates far off house power, so the Ghost Controls unit you’re fighting is usually fighting the terrain and the heat before it’s fighting you. If your operator stalls mid-travel, trips its limit, or won’t respond to the remote, call Wrought Gate Repair at (833) 545-6817. We’re an independent service provider, not a Ghost Controls authorized dealer, and we diagnose the gate, the posts, and the power supply before we touch anything electrical.
Why Wildomar Residents Choose Us for Ghost Controls Service
We work exclusively on gates. That’s the whole trade. When a Ghost Controls swing operator starts acting up on a five-acre parcel off the I-15 corridor, the problem is rarely just the motor. It’s the decomposed granite that shifted under the post, or a solar panel that’s been shaded by an oak for three months, or a battery that baked through one too many 105-degree afternoons. We know Ghost Controls equipment the way a mechanic knows a specific engine line. Ruben Castellano, our owner, learned the electrical and mechanical side of automated gates through the Industrial Technology program at Chaffey College in Rancho Cucamonga, and he’s spent over a decade diagnosing Viking, LiftMaster, FAAC, and Ghost Controls systems across the Inland Empire’s subdivisions, equestrian properties, and commercial yards. That includes plenty of Ghost Controls in Lakeland Village and similar communities. When we show up to a Wildomar home, we’re not guessing at the brand. We already know what fails on these units and in what order.
We’re also local to the region. Wildomar isn’t a satellite city we occasionally drive through. We understand ranch-style pipe-rail gates on acreage, builder-grade decorative metal gates in newer tracts, and everything in between. The Ghost Controls sales & service work we do spans the full product line, and we keep our deep familiarity with this platform current by repairing it every week. One call covers the diagnosis, the parts, and the fix.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Wildomar
- Gate runs a few feet and stops, remote seems dead. This is the most common Ghost Controls symptom we see on Wildomar’s large-lot and rural properties. The unit isn’t dead. The solar panel is shaded or dusty, the battery is sulfated from inland heat, and the system has dropped into low-voltage protection. We test the panel output, load-test the battery, and replace what actually failed instead of condemning the motor.
- Post settles in decomposed granite and the arm binds. Wildomar’s ground moves. Acreage gate posts creep out of plane a quarter-inch to a half-inch per season, and the Ghost Controls swing arm starts binding against the bracket. The opener strains, trips its current-limit, and eventually refuses to complete a cycle. We re-set posts, re-brace them, and re-align the arm so the motor isn’t fighting the geometry.
- Baked control boards and sun-cracked housings. The Santa Ana corridor sun is brutal on enclosure gaskets and board connections. Years of UV and 100-degree-plus afternoons cook the control board until you get intermittent phantom opens and limit faults that don’t repeat on a test bench. We replace boards with OEM Ghost Controls units where calibration matters, and reseal housings properly after every repair.
- Wind-loaded hardware wear on ranch and pipe-rail gates. Heavy gates catch Santa Ana gusts, and that force hammers the arm pin and operator bracket. The gate drifts past its limits, then reverses on close, and owners think the opener is defective. It’s usually mechanical wear amplified by wind. We rebuild the hardware, re-set the limits, and the Ghost Controls unit runs clean.
- Battery backup that won’t hold a charge. Wildomar owners add battery backups because outages and brownouts are part of living on the grid’s edge. But a battery that’s never been load-tested since installation will fail right when you need it. We test, replace with quality aftermarket units where they beat OEM pricing, and make sure the charging circuit actually works.
Ghost Controls Service in Wildomar: What Local Conditions Mean for Your Equipment
Wildomar’s rural parcels rely on solar-powered driveway operators far off the grid, and the decomposed-granite ground here shifts under gate posts each season. That means a Ghost Controls “dead motor” call in Wildomar is usually a battery, panel, or post-footing problem before it’s ever a board failure. We see it constantly: the opener was installed when the post was plumb, the panel got full sun, and the battery was fresh. Two summers later the post has crept, the panel is shaded by a tree that grew six feet, and the battery has sulfated in the heat. The motor never failed. The site changed underneath it. Out on a large-lot property off the I-15 corridor near Wildomar, our crew answered a call about a Ghost Controls repair in Canyon Lake and surrounding areas for a single-swing driveway operator that would run a few feet and stall. The solar panel had been shaded by an overgrown oak and the battery was sulfated from the summer heat, while the gate post had settled a half-inch in the decomposed granite and pushed the arm out of plane. We re-set and re-braced the post, replaced the battery with a quality aftermarket unit, repositioned the panel for full sun, and re-calibrated the limits. The gate has run clean through the Santa Ana season since.
If your gate isn’t opening the way it should, there’s a reason, and guessing at it isn’t a repair strategy. That’s especially true on Wildomar acreage, where the problem is often two or three stacked failures working together. We find the whole chain before we replace anything.
Ghost Controls Models & Products We Service in Wildomar
We service the full Ghost Controls residential line, including the Heavy-Duty Single Swing (TDS) series, the Standard-Duty Single Swing (TSA) series, the Dual Swing (TD2 / TSS) series, and the solar and battery-backup accessory kits that keep long-run driveway operators running off the meter. On Wildomar’s acreage gates, we commonly see TDS units paired with solar kits, and those setups need a different diagnostic approach than a plug-in TSA on a builder-grade gate in a newer tract. We use OEM Ghost Controls boards, arms, and limit parts where calibration and safety depend on them. For batteries, solar panels, and brackets, we use quality aftermarket parts where they beat the OEM price without cutting service life. We stock what Wildomar’s most common failures call for, so we’re not waiting on freight for most repairs.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Wildomar
Ghost Controls repair in Wildomar typically runs between $180 and $480 for most single-operator diagnostics and repairs, with full board replacements, post re-setting, or complete solar-system rebuilds landing on the higher end. A basic limit adjustment or battery swap often sits closer to $180 to $250. If we’re re-setting a heaved post or replacing a baked board, you’ll see $350 and up, depending on parts and site access. What drives the cost: the specific Ghost Controls model, whether we’re working on a solar or AC-powered setup, how far the gate sits from house power, and whether post work is involved. Every repair gets a written, agreed-upon price before we start work. We don’t run invoices past what we quote. Call (833) 545-6817 for a free estimate. Ruben will tell you straight what it costs.
Serving Wildomar, CA — Our Local Coverage Area
We’re based in the Wildomar area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Wildomar
Probably not. On Wildomar acreage, a ghost-motor symptom like this is usually a low-voltage condition from a shaded or dirty solar panel, a sulfated battery, or an arm binding against a post that’s settled in decomposed granite. We test the power path and the post before we ever condemn a motor. Call (833) 545-6817 and we’ll trace it down.
Santa Ana gusts push against a heavy pipe-rail or ranch gate, loading the arm pin and bracket until the gate drifts past its limit and reverses on close. The limit switch trips because the hardware has worn or the post has shifted. We re-align the arm, re-set the limits, and replace the worn bracket so wind stops defeating the operator. If it’s happening regularly, call us before the bracket breaks completely.
Yes. We install and service Ghost Controls battery-backup accessory kits on both new and existing operators across Wildomar. The key is matching the battery capacity to your gate’s size and duty cycle, and ensuring the charging circuit works with your solar panel or AC feed. We test the whole loop before we leave.
We re-set and re-brace the post in place where possible, then re-align the Ghost Controls arm to the new post plane. In Wildomar, decomposed-granite soil means posts creep every season, so we often add a deeper footing or a brace to keep it from moving again. Then we re-calibrate the limits and the operator runs clean. The alternative, replacing a motor that’s binding against a shifted post, just burns out the new part. We won’t sell you that fix, whether it’s here or on a Ghost Controls in Sedco Hills job. We won’t sell you that fix.
We do. Along with Ghost Controls, we service LiftMaster, FAAC, BFT, Linear, Viking, DoorKing, Elite, and Mighty Mule systems. That matters if you have two gates on the property with different brands, or if you inherit a mystery operator with no manual. One call covers it.
Service Areas Near Wildomar
We serve Wildomar and the surrounding Inland Empire communities, including Chino, Los Serranos, Ontario, Montclair, Pomona, and Claremont. If your Ghost Controls gate is acting up anywhere in the region, we’ll come out. For our neighbors east of here, see Ghost Controls service in Yucaipa. Up the pass, we also cover Ghost Controls service in Mountain View Acres. For everything we do in this immediate area, check the Wildomar service area page.
Book Your Ghost Controls Service in Wildomar Today
We keep same-day availability for Wildomar gate failures whenever the schedule allows, and we’ll always give you a straight answer before any work begins. Call Wrought Gate Repair at (833) 545-6817 or request a free estimate and Ruben will get eyes on your Ghost Controls system.
Written by Ruben Castellano, Owner at Wrought Gate Repair, serving Wildomar and the Inland Empire.