Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Orange
Electric gate repair in Orange typically costs $180 – $340 for most residential service calls, with operator replacement running $850 – $2,400 depending on the system. We’re Wrought Gate Repair, and gates are the only thing we work on. If you live off Cambridge or Glassell, around the Plaza, or anywhere in the 92866 and 92865 zip codes, we know the housing stock, we know how those older gates were hung, and we know what fails on them after 40 or 50 years of Orange sun. Call (833) 545-6817 for a free estimate, quoted and agreed before we touch a single bolt.
Why Wrought Gate Repair Is Orange’s Preferred Electric Gate Repair Company
We’ll say it plainly: we work exclusively on gates. Not fences, not garage doors, not general contracting. Every diagnostic call, every part we stock, every hour our technicians spend on the road is focused on one trade. That matters in Orange because most of the electric gate problems here are not brand-new installs gone wrong; they’re legacy systems installed in the 1960s through the 1990s on homes that predate modern automation standards. A generalist sees an old LiftMaster or FAAC board and wants to sell you a new operator before they’ve even tested the input voltage. We rebuild, retrofit, and re-tune first, and we tell you honestly when replacement is the cheaper answer.
Ruben Castellano runs our crew and personally reviews every diagnostic that comes out of Orange. His approach is the same on every job: find the actual cause, not the most convenient symptom. That commitment is why our Orange customers tend to call us back for one simple thing, the same thing that got them the first job, which is that the gate works and the price matched the quote.
Styles & brands we work with





Automatic Gate Repair in Orange
Automatic Gate Repair in Orange is still our most common call, and it almost always lands on residential swing gates from the 1960s through the early 2000s. What the job involves depends on what we find, but in Orange we see a distinct pattern: aging operators on gates hung before UL 325 entrapment protection was required, paired with iron or wood panels whose hinge geometry has drifted over decades. A typical automatic gate repair here runs $180 – $340 and covers diagnostic time, labor, and common parts like limit switches, capacitors, and control board relays. Re-setting a hinge post is extra and quoted separately, because that is structural work, not operator work.
Opener and control board troubleshooting
Most “dead gate” calls in Orange are not dead motors. They’re dead control boards, failed safety sensors, or a shorted keypad wire from a 30-year-old run that was never in conduit. We bench-test boards before condemning them, and we stock replacement boards for LiftMaster, FAAC, BFT, Linear, and Viking systems.
Safety sensor and keypad work
Older Orange gates often have photo-eye systems that worked fine for two decades and then started nuisance-tripping after a Santa Ana season shifted a post enough to knock the beam alignment out. We re-align, upgrade, or replace sensors and keypads, and we wire everything to current code when we’re already in the junction box.
Electric Gate Motor in Orange
Electric Gate Motor replacement in Orange runs $850 – $2,400 installed, depending on whether you’re swapping a residential swing arm operator or a heavier slide motor on a commercial or multi-family gate. The labor piece is straightforward; what drives cost in Orange is how far out of spec the physical gate has become. A motor that burned out because it was fighting a sagging iron panel needs more than a new motor, it needs the panel re-hung, or the new motor burns out the same way the old one did. We quote motor replacement with that assessment included, so the price you approve is the price that actually fixes it.
Vintage and brand-specific operators
We service nine gate automation brands, and in Orange we see a notable concentration of older FAAC and LiftMaster residential operators, along with Viking and Linear on the larger driveway gates. Matching torque curves and duty cycle to the actual gate weight matters more than brand loyalty, and we test that before recommending a unit.
Belt, gear, and rack-and-pinion failures
Sun-baked plastic gears and stripped rack-and-pinion assemblies are common on Orange gates that face west without shade. We stock common gear kits and rack sections locally, so most motor internals repairs finish the same visit rather than waiting on a distributor.
Trusted Brands We Service in Orange
We carry parts and service procedures for nine major gate automation brands, including the ones we see most often in Orange: LiftMaster, FAAC, BFT, Linear, and Viking. That cross-brand capability means you don’t get bounced from dealer to dealer when your system is a 1998 FAAC that the original installer no longer supports. If your gate was built with a Mighty Mule or Ghost Controls kit, we handle those too, and we’re direct about which budget operators are worth repairing versus replacing. For Orange customers, we stage common boards, sensors, and remotes locally so turnaround is measured in days, not weeks.
Common Electric Gate Repair Problems We See in Orange Homes
- Legacy control boards faulting out. Original 1960s through 1990s boards on LiftMaster and FAAC operators lose their relay logic or motor control capacitors, and many are simply no longer serviceable. We can honestly assess whether a retrofit board or a full operator replacement makes more financial sense.
- Santa Ana wind damage to wood gates. Orange’s seasonal wind events dry out and warp wood driveway gates, throwing latch alignment and hinge geometry off. A gate that slams and bounces after a wind event usually has a sprung hinge or a twisted picket, not an operator problem.
- Sagging gates from leaning post footings. In the flat, tree-lined streets of Old Towne and the Camino Viejo grid, many gate posts sit on aging concrete or brick footings near historic property lines. The gate sags at the hinge post while the operator, rack and pinion, and everything else reads fine.
- Photocell and safety edge nuisance trips. Gates predating UL 325 often lack proper entrapment protection, and older retrofits use cheap sensors that are misaligned after a post shifts. We re-align, re-wire, or upgrade to current-sensing edge systems appropriate for the gate’s weight and travel.
Pricing for Electric Gate Repair in Orange, CA
Most electric gate repairs in Orange land between $180 and $340, including the diagnostic visit, labor, and standard components. Gate motor replacement runs $850 – $2,400 installed depending on the operator class and whether we’re also correcting hinge geometry or post alignment. Keypad replacement is typically $250 – $450, and safety sensor upgrades run $200 – $400 per set. The number on the quote is the number you pay; we quote and agree on price before any work starts, and we don’t pad invoices with after-the-fact “complications” we should have caught in diagnosis. Call (833) 545-6817 and tell us what your gate is doing. The estimate is free.
See the difference
Before
After
Before
After
Before
AfterElectric Gate Repair Across Orange’s Neighborhoods
We run calls every week to Old Towne, the area around the Plaza and Chapman University, and the mid-century tracts off Tustin Street. What we see changes by neighborhood: Old Towne’s pre-war lots often have brick or concrete post footings that have shifted over 80 years, while the 1950s and 60s tracts have iron driveway gates that rust at the bottom hinge and fail there first. That local familiarity is why our Electric Gate Repair diagnostics in Orange start with the hinge post and the physical gate before we ever open the operator cover. If you’re in 92866, 92863, or 92864, we’re usually on site within a day or two. For more on our service area, see Electric Gate Repair in Orange.
An Orange Gate We’ll Always Remember
On a narrow street off the Old Towne Plaza, we were called to a 1960s wrought-iron swing gate whose LiftMaster operator would stall halfway open. The board would fault, reset, and fault again. The real culprit was a leaning concrete post footing pulling the hinge post out of plumb, binding the panel every time it reached mid-swing. We re-set the footing, re-hung the panel, then re-tuned the operator and confirmed the safety photocell. The gate now runs clean through its full arc without the board faulting out. That job is exactly why we don’t sell operators over the phone before anyone has looked at the post.
We Also Serve Cities Near Orange
Our Orange work regularly takes us into Villa Park, North Tustin, Tustin, and Anaheim, where the housing stock and gate systems are similar but the lot sizes and post conditions differ. The same crew, the same nine-brand coverage, and the same honest diagnostic approach applies anywhere we go.
Serving Orange, CA — Our Local Coverage Area
We’re based in the Orange area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Orange
It depends on the board’s age and failure mode. Pre-2000 control boards on legacy LiftMaster and FAAC residential operators often cannot be economically repaired because replacement boards are discontinued and aftermarket boards don’t match the motor’s drive profile. In those cases a new operator is usually cheaper than trying to keep a 40-year-old board alive. Some 1990s and later units can take retrofit relays or board-level repairs, and we test before recommending either path. Call (833) 545-6817 and we’ll tell you what your specific operator can support.
Yes. Any automated gate operator installed or significantly modified after the UL 325 standard took effect must have a primary entrapment protection device, which for residential swing and slide gates generally means photo-eyes, a safety edge, or both. Older Orange gates that were automated before the standard often lack compliant protection, and if we’re working on the operator, we’ll bring the safety system up to code. We won’t leave a gate in service that can’t reverse on contact.
Because the gate panel itself has moved. In Orange, especially in Old Towne and the flat Camino Viejo streets, aging concrete or brick post footings lean over decades, and the gate sags at the hinge post. The operator and rack read fine because they’re bolted to a surface that already shifted. Sag correction has to start at the hinge post, not the operator. We re-set footings, re-hang panels, and only then re-tune the drive.
We can. Solar openers on rear side-yard gates are common in Orange where running 120V to the back property line isn’t practical. The issues we see are undersized solar panels, dead batteries from winter shading, and charge controllers that failed. We service the full system: panel, battery, controller, and the opener itself, and we can upgrade any component to match the gate’s actual duty cycle. Call us for a site read, we’ll let you know if the system is worth repairing or should be replaced.
Yes, and we see it every fall. Orange’s Santa Ana events are dry and sustained, and they warp wood, loosen hinges, and knock latch alignment out. A wood driveway gate that survived summer will start dragging or bouncing after the first strong wind event. Usually it’s a hinge or picket problem, not an operator problem. We inspect the full panel and fix what actually moved before it chews up the operator. Call us for an inspection. The estimate is free.
Call Wrought Gate Repair in Orange Today
If your gate is sagging, stalling, faulting out, or just not opening when you press the remote, call (833) 545-6817. We work exclusively on gates, we service nine major brands including the legacy systems you find throughout Orange, and we quote the job before we start. From Old Towne to the 92865 tract homes, one call covers it. Your gate, fixed right.
Written by Ruben Castellano, Owner at Wrought Gate Repair, serving Orange and surrounding cities.