Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across San Bernardino
Gate repair in San Bernardino comes down to one reality: this climate punishes metal. Between the 100°F summers, the UV that never lets up, and the Santa Ana winds driving grit off the foothills, your gate is fighting a daily battle against oxidation, warping, and seized hardware. We fix that battle. Wrought Gate Repair works exclusively on gates across San Bernardino, from the older neighborhoods off Highland Avenue to the newer subdivisions near Cal State. When your gate won’t open, sags on its hinges, or trips its operator every afternoon, call (833) 545-6817. We’ll get a technician to you fast, and we’ll diagnose the actual problem, not guess at it.
Key takeaways:
- We repair gates in all San Bernardino ZIP codes: 92401, 92402, 92403, 92404.
- We service nine automation brands, including FAAC, BFT, Linear, and Viking.
- Most iron gate repairs in San Bernardino run $180 – $450 depending on hinge and weld work.
- Price is quoted and agreed before any work starts. No surprises.
Why Wrought Gate Repair Is San Bernardino’s Preferred Gate Repair Company
Nobody in San Bernardino wants to call three different companies to fix one gate. That’s exactly what happens when you call a fence contractor for gate work, or a garage door company that happens to have a gate guy. We don’t do fences. We don’t do garage doors. We work on gates, full stop. Every technician on our team spends their entire day diagnosing and repairing gate systems, which means the problem gets found the first time, not the third time. Our Gate Repair team handles everything from a sagging wrought iron swing gate on a 1950s ranch home to a full electric slide gate at a commercial property off E Street.
We’ve worked in San Bernardino long enough to know exactly what the local housing stock throws at us. Mid-century tract homes with original wrought iron gates. Older bungalows near downtown with gates hung decades ago, before modern safety requirements existed. Newer vinyl and wood gates on the north side of the 210 that fade and warp differently than metal. The common thread is that these gates were installed for a different climate than the one that actually exists here. We account for that. We know which operators hold up under San Bernardino heat and which ones fail by August. We know which hinge types seize first when wind-blown sand works into the post. That local knowledge is the difference between a repair that lasts and a repair that gets called back in six months.
Ruben Castellano leads every job with the same standard: if you can’t say exactly what failed and why, you shouldn’t be touching the gate.
Styles & brands we work with
Iron Gate Repair in San Bernardino
Iron Gate Repair in San Bernardino is our most common call, and for good reason. Wrought iron gates on 1950s and 1960s properties have been absorbing this city’s UV for 60 years or more. The finish breaks down, moisture gets in, and oxidation starts. Then the gate sags, the latch stops lining up, and one day the leaf drags across the driveway instead of swinging clean. A full iron gate rebuild in San Bernardino typically runs $350 – $750 depending on how much weld repair the frame needs and how badly the hinges have worn.
Weld and Rust Repair
Rust is the enemy. On an iron gate, the bottom rail and hinge side rust first because that’s where water pools and where the post traps moisture. We cut out the compromised section, weld in fresh steel matching the existing profile, and treat the area so it doesn’t rust out again in two years. Expect $150 – $300 for a typical rail repair, more if multiple sections have gone.
Hinge and Post Replacement
When the post itself has rotted or cracked, weld repair won’t save it. We set new posts, re-hang the gate leaf, and adjust the swing so it closes true to the latch. In San Bernardino’s clay-heavy soil, we also check that the post is set deep enough to hold against Santa Ana wind gusts. Post and hinge replacement typically runs $200 – $400 per post.
Sliding Gate Repair in San Bernardino
Sliding Gate Repair in San Bernardino has a unique local complication: wind-blown sand from the nearby mountains. That grit works into the track, the rollers, and the rack and pinion, accelerating wear on components that would last years longer in a coastal city. A sliding gate that grinds, jerks, or stalls midway is usually telling you the track is packed with debris or the bearings are shot. Typical sliding gate repair in San Bernardino runs $250 – $550 for roller replacement, track cleaning, and rack alignment. Motor and control board work adds from there.
Track and Roller Service
We pull the gate off the track, clear the grit and packed dust, inspect the rollers, and replace any that have gone flat. Flat rollers are the number one cause of a slide gate that shakes and binds. A full track service with new rollers usually runs $300 – $500.
Rack and Pinion Alignment
The rack is the toothed bar that the motor’s pinion drives. When sand gets between the teeth, it wears the rack unevenly and the gate starts to stutter. We re-align or replace the rack, then set the pinion engagement so it drives clean. Rack replacement typically runs $200 – $400 depending on gate length.
Trusted Brands We Service in San Bernardino
If your gate has a motor, there’s a good chance we service the brand. We carry parts and diagnostic knowledge for FAAC, BFT, Linear, and Viking systems, along with five other major automation brands. Whether you’ve got a FAAC hydraulic operator on a commercial slide gate or a BFT swing arm on a residential driveway gate in the 92403, our techs know the board layouts, the common failure points, and the safety circuit requirements. We keep the most frequently-failed components stocked in our Chino shop, so a San Bernardino call doesn’t wait a week for a part to ship from a brand distributor. For older Linear and Viking operators that have gone obsolete, we’ll tell you honestly whether the board can be sourced or whether you’re better off replacing the operator with something that still has parts support.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in San Bernardino Homes
- UV-baked finishes and oxidation. Summer after summer of 100°F heat breaks down paint and powder coat on iron gates. Once the bare metal shows, oxidation starts and spreads fast, especially on south-facing gates that get full afternoon sun.
- Sagging gate leaves on older wrought iron. The original hinges on a 60-year-old gate were never meant to hold that weight that long. Metal fatigues, the leaf drops, and the latch misses the strike plate by half an inch.
- Seized slide gates from wind-blown grit. In neighborhoods near the foothills, dust and sand blow into slide tracks constantly. Bearings grind, the rack wears unevenly, and the motor overheats trying to drive a gate that’s fighting the track.
- Obsolete operator boards failing under heat. Pre-UL 325 operators from the 1990s and early 2000s have control boards that degrade in sustained heat. When they fail, replacement boards are often unavailable, which means the whole operator needs an upgrade path.
Pricing for Gate Repair in San Bernardino, CA
Gate repair pricing in San Bernardino breaks down into a few honest ranges. A basic service call to diagnose the problem runs $75 – $125, which we credit toward the repair if you move forward. Hinge work, sag correction, and minor weld repair typically land between $180 and $450. Sliding gate service with roller replacement and track work runs $250 – $550. Full operator replacement, including the motor, board, and safety sensors, starts around $800 and goes up based on the gate’s weight and length. Every job is quoted and agreed before any work starts. You’ll know the number before we touch the gate. Call (833) 545-6817 and we’ll give you a real quote, not a vague estimate.
We Also Serve Cities Near San Bernardino
Beyond San Bernardino itself, our Gate Repair in San Bernardino service area reaches Muscoy to the northwest, Highland to the east, Loma Linda to the south, and Rialto to the west. We dispatch from Chino, so most of these areas see us within the same day or next morning.
Serving San Bernardino, CA — Our Local Coverage Area
We’re based in the San Bernardino area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in San Bernardino
Yes, in most cases. If your operator is pre-UL 325 and lacks photocells or a reversing edge, we can add external safety sensors that integrate with the existing board, as long as the board still has a functioning accessory terminal. When the board has failed or doesn’t support modern entrapment protection, retrofitting doesn’t make sense and replacement is the cheaper long-term answer. We’ll show you the board and explain which path applies before you decide. Call (833) 545-6817 for an assessment.
The wind carries sand and dust from the nearby mountains straight into gate hardware. Slide gate tracks fill with grit. Hinge posts collect dust that works into the bearing surface. Gates on the north side of a home don’t see this nearly as often because the structure shields them from the prevailing wind. If you live in the foothill neighborhoods, expect hinge lubrication and track cleaning twice a year, and budget for roller replacement more often than someone in central San Bernardino.
Usually, yes. Sag is typically a hinge and post issue, not a frame issue. We re-set the post if needed, replace worn hinges, and add a sag truss rod if the leaf has bowed over decades of San Bernardino sun. A gate that’s rusted through at the bottom rail can still often be repaired by cutting out the bad section and welding in fresh steel. Full replacement is only the answer when the frame itself has twisted or the metal has thinned beyond a safe weld.
The heat does two things at once. It bakes the finish, causing paint and powder coat to chalk, crack, and peel, especially on south-facing gates. And it softens and degrades plastic components inside gate operators, including gear housings and board capacitors. We recommend an annual inspection each spring, before the worst of the heat hits, so you catch paint failure before rust sets in and catch board fatigue before the operator dies in July.
We do. Solar gate openers are common here because running line power to a gate post can be expensive or impractical. Most solar systems we see in San Bernardino use a DC operator with a panel and battery. The heat shortens battery life significantly, so panels that worked fine for years start under-charging the batteries by mid-summer. We test the panel output, load-test the batteries, and replace what’s actually dead rather than selling you a whole new system. Call (833) 545-6817 for a solar gate opener evaluation.
Written by Ruben Castellano, Owner at Wrought Gate Repair, serving San Bernardino and the Inland Empire with gate-only expertise.