Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Mentone, CA
Gate installation in Mentone is not a generic bolt-in job. Most properties here are older foothill parcels with long driveways, custom-welded steel frames, and posts set into shifting decomposed granite or wash-adjacent soil. We see far more ranch-style swing gates, solar-operator retrofits on custom iron, and slope-compensated sliding track work than anything you’d find in a tract city. The heat, the freeze, the Santa Ana gusts, and the runoff all shape what a gate needs to survive here. As a gate-only company, we design and install for those conditions rather than treating Mentone like a flat suburb. Call (833) 545-6817 if you need a specialist who knows this town. Below is the one resource you need for gate work in Mentone.
Why Mentone Homes Are Different
Mentone is an unincorporated foothill community sitting against the base of the San Bernardino Mountains. Unlike the denser subdivisions in Redlands or Highland, Mentone has a lot of older single-family homes on generous, irregular lots, plus a strong mix of mid-century ranches, manufactured homes, and horse properties with outbuildings and barns. Long rural driveways dominate. Many gates here were never builder-installed. They were welded by a previous owner, a local fabricator, or a ranch hand, and they often hang on posts set shallow or set without enough concrete for the soil conditions.
The climate works against gates year-round. Summer heat climbs well past 95 degrees, baking steel and drying wood to the point of warp. Santa Ana wind events push hard against long gate leaves, especially swing gates with solid panel fills, which catches wind like a sail. Winter brings frost and periodic freezes, and the real damage comes from saturated ground. On sloped lots near the washes and foothill roads, winter and spring runoff helps posts heave and settle. A gate that cleared fine in July can be dragging on the gravel by late February. That is a Mentone-specific pattern we expect and plan for, especially on the long runs off Garnet and the roads feeding Mill Creek.
Styles & brands we work with
Our Main Mentone Services
Most calls we take in Mentone fall into two buckets: mechanical and structural repair on existing gates, and electrical or automation troubleshooting on gates that used to move on their own but now refuse, half-open, or reverse erratically. Both are covered by us, under one roof.
Gate Repair in Mentone
This is the bulk of the work we do in Mentone. Long custom-welded drive gates, tired hinges, bent frames, dropped corners, failed post connections, and racking from heat or wind. On Mentone’s bigger lots the gate is often the primary entry for vehicles, equipment, and horse trailers, so when it drags or won’t latch, everything behind it is effectively stuck. We rebuild rather than patch where the frame is worth saving, and we know when a repair is throwing good money at a gate that should be replaced. Learn more on our dedicated Gate Repair in Mentone page.
Electric Gate Repair in Mentone
Mentone has a lot of older automation retrofits on gates that started life as manual. A Mighty Mule board on a custom steel swing, a FAAC piston on a ranch gate, a Linear arm on a mid-century property off the highway. The common failures we see are sun-cooked control boards, moisture intrusion in the housing, edge sensors knocked out of alignment by wind, and opener arms fighting posts that have shifted. Full detail is on our Electric Gate Repair in Mentone page, including what causes most no-open and reverse-on-obstacle calls here.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Mentone
Gate installation in Mentone usually means replacing a gate that has outlived its frame, or adding automation to a property that has never had it. The housing stock here is older, the lots are bigger, and many existing gates were custom-built decades ago for manual use. Climate is the central factor: intense summer sun, dry/wet cycling, Santa Ana gusts, and runoff that shifts post footings all mean a gate installed to flat-lot conventions will fail early. We build for that. If you are planning a new gate or a full replacement, this section covers what to expect, and you can see the full scope on our Gate Installation page.
Automatic Gate Installation
Signs you need it
You open and close the gate by hand multiple times a day, or you have a manual gate and want keypad, remote, or intercom access without getting out of the vehicle.
What it costs in Mentone
Automatic gate installation in Mentone lands between $4,900 and $12,700 on average, with higher-ticket jobs tied to solar power, long runs, and intercom integration.
How we do it
We assess the gate leaf weight and post condition, specify the right operator from a brand that fits the gate type, run or verify power, install and torque the opener, then dial in limits, safety edges, and remotes before handing it over.
Driveway Gate Installation
Signs you need it
The current gate drags, the posts lean, the frame is cracked through, or your driveway width and vehicle needs have outgrown what is there.
What it costs in Mentone
Driveway gate installation in Mentone ranges from $2,100 to $9,300, with the spread driven mostly by single-leaf versus bi-parting double-leaf gates and steel weight.
How we do it
We measure the opening and slope, set posts to the correct depth for Mentone soil, hang and square the gate leaves, install hardware rated for the wind exposure, and adjust to a clean close with no drag.
Sliding Gate Installation
Signs you need it
Your driveway is steep, your setback is too short for a swing leaf, or wind loads are too severe for a long swing gate.
What it costs in Mentone
Sliding gate installation in Mentone runs between $3,400 and $11,500, with higher numbers on long track runs, heavy custom steel, and slope compensation.
How we do it
We lay out the track and gate path, set the post and receiver, hang and level the leaf, install the operator and rack, and tune the safety edges and travel limits for reliable operation on your specific grade.
What Gate Installation Costs in Mentone
| Item | Typical range in Mentone |
|---|---|
| Driveway gate installation | $2,100 – $9,300 |
| Automatic gate installation | $4,900 – $12,700 |
| Sliding gate installation | $3,400 – $11,500 |
On sloped Mentone lots, expect material and labor to run higher when posts need deeper footings or the track needs grading. We give a written, itemized price before any work starts, and that number does not change unless you change the scope.
How long does gate installation take in Mentone?
Most standard driveway gate installations take one to three days on site, including post setting and hardware adjustment. Custom steel fabrication, sliding track, or automation add time, especially when permits or power runs are involved.
Do I need a permit to install a gate in Mentone?
Unincorporated San Bernardino County often requires permits for new gate structures with electrical or deep footings, but it depends on scope and power source. We handle that conversation early so installation does not stall mid-project.
Brands We Service in Mentone
We work across nine major gate automation brands, and the ones we see most in Mentone are FAAC, BFT, Linear, and Viking. That means when an older ranch gate has a BFT board that is no longer made, or a Viking arm that needs matching hardware, we can usually source and install it without sending you to a brand-specific dealer. See our brands for the full lineup.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Mentone, CA
| Service | Typical range in Mentone |
|---|---|
| Gate repair (hinge, sag, latch, post) | $180 – $600 |
| Gate frame welding / straightening | $250 – $800 |
| Electric gate opener motor replacement | $600 – $1,900 |
| Electric gate circuit board repair/replacement | $250 – $750 |
| Safety sensor / photo eye replacement | $150 – $400 |
| Driveway gate installation | $2,100 – $9,300 |
| Automatic gate installation | $4,900 – $12,700 |
| Sliding gate installation | $3,400 – $11,500 |
In Mentone, wind exposure on long leaves, heat-related board failures, and post settlement are the three big cost drivers. The price we quote is the price you pay, agreed in writing before work starts.
Neighborhoods We Serve in Mentone
Mentone’s boundaries cover ZIP 92359 and a mix of older foothill streets, ranch parcels, and unincorporated county land along the Highway 38 corridor. We regularly run calls to the following areas:
- Mentone Heights and the streets off Garnet
- The ranch properties along Crafton and Wabash
- Homes near Mill Creek and the Highway 38 foothill approaches
- Manufactured-home parcels and older subdivisions east toward Yucaipa
- Rural lots south of Mentone Boulevard toward the wash
Response time for most Mentone calls is same-day or next-day, depending on the season and the call load from Redlands and Highland.
Service Area – Cities Near Mentone
We work throughout the eastern Inland Empire gate market. From Mentone we cover the HOA-gated communities and older subdivisions in Redlands, CA, the hillside and ranch properties in Yucaipa, CA, the tract and foothill gates in Highland, CA, and the rural desert-edge lots in Calimesa, CA. One call covers the whole service area.
Serving Mentone, CA — Our Local Coverage Area
We’re based in the Mentone area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Mentone
For gate repair and electric gate failures, we aim for same-day or next-day dispatch in Mentone. Installation work is scheduled around material lead times and fabrication, but the initial measure and quote can usually be booked within a few days. Call (833) 545-6817 to confirm current availability.
Most Mentone properties are unincorporated county, not HOA-governed, though a few newer pockets have associations. If there is a height, material, or automation restriction, we build to it and can work from your HOA’s written spec to avoid a violation later.
Do you handle both the gate and the opener?
We are a gate-only company, so yes. We handle the steel, the hinges, the posts, the operator, the board, the sensors, and the remotes as one scope of work. You are not coordinating a welder and an electrician and a gate-opener dealer separately. Call (833) 545-6817 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Mentone Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Jasmine Coleman"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— Marisol Flores"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Gilbert Delgado