Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Mission Viejo, CA
Gate installation in Mission Viejo usually means replacing hardware on a gate that was installed when the house was built, not starting from a bare opening. Most of the single-family homes here went up between 1965 and 1990, so we’re regularly pulling 40-year-old hinges off posts and matching new automation to gates the original builder put in. That changes how we quote, what parts we carry, and how long the job takes. If your gate is sagging, sticking, or just worn past repair, call Wrought Gate Repair at (833) 545-6817 and we’ll come measure it.
Why Mission Viejo Homes Are Different
Mission Viejo is a master-planned community built out in the 1960s through the 1980s, and that single fact shapes almost every gate job we do here. The housing stock is overwhelmingly single-family, planned-tract construction from that era, meaning most properties have original driveway gates, side-yard gates, or both. Those gates are now 30 to 50 years old. Wrought iron has rusted through in spots, wood gates have dry rot, and vinyl has turned brittle in the sun. The city’s HOA structure adds another layer: many neighborhoods have architectural review requirements that say replacement gates must match the original design, color, and sometimes even the original hardware style. That makes repair, not replacement, the smarter move in a lot of cases, and it means whoever works on the gate needs to understand what the HOA will and won’t approve. The climate pushes the same direction. Summers are hot and dry, and Santa Ana winds hit hard enough to bend gate frames and loosen post brackets. Rain is scarce, so rust is less common here than sun damage and wind fatigue. Wood gates crack along the grain. Iron gates lose paint and powder coat. Vinyl gates warp at the corners. And in the original Mission Viejo tracts, builders often used standardized gate hardware that’s now obsolete, so finding the right replacement part takes someone who recognizes the old stuff rather than defaulting to whatever modern part is on the truck.
Styles & brands we work with
Our Main Mission Viejo Services
Mission Viejo homeowners call us most often for one of two things: a manual gate that’s sagging or stuck, or an automated gate that’s stopped responding. Here’s a quick look at both.
Gate Repair in Mission Viejo
Most gate repairs in Mission Viejo start as hinge or post problems. The original builder hardware from the 1970s and 80s is often wallowed out, rusty at the welds, or simply undersized for the gate it’s carrying. We repair sagging gates, replace frozen hinges, fix latch alignment, and rebuild posts that have shifted in the soil. On wood gates we deal with dry rot and splitting, which the hot summers accelerate. On iron gates it’s usually weld fatigue or paint failure. Whatever the material, we bring the gate back to plumb and smooth operation, and we match replacement hardware to the original where the HOA expects it. Read the full breakdown on our Gate Repair in Mission Viejo page.
Electric Gate Repair in Mission Viejo
Electric gate systems in Mission Viejo are a mix of original 1990s openers and newer smart systems, and they all fail differently. Santa Ana wind gusts push gates off their limit stops, which confuses the opener. Heat cycles cook circuit boards and power supplies. Sensors drift out of alignment when posts move. We diagnose and repair controls, motors, safety edges, keypads, and loop detectors. Whether you have a LiftMaster, Elite, DoorKing, or Mighty Mule opener, the brand dictates the parts and the test procedure, and we stock or can quickly source across all of them. Details are on our Electric Gate Repair in Mission Viejo page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Mission Viejo
Gate installation in Mission Viejo replaces a gate that’s failed beyond sensible repair or upgrades a manual gate to automation. The homes here were built in the 1965-1990 window, so a new gate usually has to look like it belongs with the era of the tract. That means matching the original material, profile, and color where the HOA reviews it, and setting posts deep enough to hold plumb through Santa Ana wind cycles. We handle the full job from demolition of the old gate through final adjustment, and we quote the whole thing before any work starts. This is one of the three lines we run at Wrought Gate Repair; the full Gate Installation service page has the details.
Automatic Gate Installation
Signs you need it
A manual gate you’re tired of opening by hand, a property that needs controlled access, or an old opener that’s no longer supported is the usual starting point for automatic gate installation in Mission Viejo.
What it costs in Mission Viejo
Automatic gate installation in Mission Viejo typically runs $3,500 to $8,000, depending on the opener brand, gate length, and whether we’re adding safety edges and loop detectors.
How we do it
We set and core-fill the operator post, weld or bolt the opener mount, mount the gate onto new hinges, install the opener arm and limit stops, run power and low-voltage cabling, then program and test the full cycle including safety edges.
Driveway Gate Installation
Signs you need it
When the old driveway gate has rusted through at the hinge stile, the post has cracked at grade, or the gate frame is racked out of square from years of wind, a full installation is cheaper than repeated welding repairs.
What it costs in Mission Viejo
Driveway gate installation in Mission Viejo typically ranges from $3,500 to $8,000, with cost driven mainly by gate material, width, and whether you’re adding automation at the same time.
How we do it
We remove the old gate and posts, drill and set new posts in concrete at the correct depth for the gate’s weight, fabricate or order the gate to the HOA-approved profile, hang it, and align the latch and stops for a clean swing.
Electric Gate Installation
Signs you need it
You have a gate but no power to it, the old opener is beyond parts availability, or the current system won’t accept a modern keypad or phone-based entry system.
What it costs in Mission Viejo
Electric gate installation in Mission Viejo typically runs $3,500 to $8,000, including the opener, wiring, safety equipment, and programming.
How we do it
We determine the gate’s swing or slide requirement, set the operator in position, pull power from the nearest code-approved source, mount safety photo eyes and edges, wire the keypad or entry system, and test the full opening and closing sequence under load.
Sliding Gate Installation
Signs you need it
A driveway with a steep approach or limited swing clearance often calls for a sliding gate, and many Mission Viejo hillside lots fit that description exactly.
What it costs in Mission Viejo
Sliding gate installation in Mission Viejo typically ranges from $4,500 to $9,000, since the track, roller trucks, and motor add to the material and labor total.
How we do it
We pour or anchor the steel track, set the roller trucks on adjustable mounts, hang the gate panel, install the motor and rack or chain drive, then tune the end stops and soft-close settings so the gate doesn’t slam in the wind.
What Gate Installation Costs in Mission Viejo
| Item | Typical range in Mission Viejo |
|---|---|
| Manual driveway gate installation | $2,500 – $5,000 |
| Automatic gate installation | $3,500 – $8,000 |
| Sliding gate installation | $4,500 – $9,000 |
Does an HOA need to approve my gate installation in Mission Viejo?
In most Mission Viejo neighborhoods, yes. If your tract has architectural review, you’ll need approval before we replace a visible gate, and the HOA will typically want the new gate to match the original style and color. We can help you spec the gate to match what the HOA expects before you submit.
Do you handle the electrical work for gate automation in Mission Viejo?
Yes. We run the power from the nearest approved source to the operator, install low-voltage wiring for keypads and sensors, and connect the whole system to code. The electrical portion is included in the quoted automatic gate installation price. Call (833) 545-6817 for a written estimate.
Brands We Service in Mission Viejo
We work on our brands across Mission Viejo, including LiftMaster, DoorKing, Elite, FAAC, BFT, Linear, Viking, Ghost Controls, and Mighty Mule. For the older Mission Viejo tracts we keep common DoorKing and Elite boards and remotes in stock because those were the most frequently installed openers in 1980s and 90s builds, which means faster turnaround on repairs.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Mission Viejo, CA
| Service | Typical range in Mission Viejo |
|---|---|
| Gate repair, general service call | $100 – $180 |
| Manual driveway gate installation | $2,500 – $5,000 |
| Swing gate installation | $2,500 – $5,000 |
| Automatic gate installation | $3,500 – $8,000 |
| Electric gate installation | $3,500 – $8,000 |
| Driveway gate installation | $3,500 – $8,000 |
| Sliding gate installation | $4,500 – $9,000 |
| Gate opener replacement | $850 – $2,500 |
| Sensor, keypad, or receiver repair | $250 – $700 |
| Hinge or post rebuild | $300 – $1,200 |
| Track replacement on sliding gates | $800 – $2,000 |
| Sagging gate correction | $300 – $1,500 |
The two things that push Mission Viejo gate pricing up are HOA-driven material matching, which can mean a custom powder coat color or a specific steel profile, and hillside driveway slopes that call for sliding gates rather than simpler swing installations. Whatever the number, we quote it in writing before any work begins, and you approve that number before we start.
Neighborhoods We Serve in Mission Viejo
We work across all of Mission Viejo, from the original planned tracts to the hillside properties along the eastern edge of the city. Most repair calls can be scheduled same-week, and we cover the full 92690, 92691, and 92692 ZIP codes.
- Mission Viejo original tracts
- Lake Mission Viejo area
- Casta del Sol
- Painted Trails
- Canyon Crest
Service Area – Cities Near Mission Viejo
Wrought Gate Repair serves Mission Viejo and the surrounding South Orange County communities. We regularly take calls from Coto De Caza, CA, Lake Forest, CA, Laguna Hills, CA, and Rancho Santa Margarita, CA. If you’re within 15 to 20 minutes of Mission Viejo, there’s a good chance we’re already working a job in your area this week.
Serving Mission Viejo, CA — Our Local Coverage Area
We’re based in the Mission Viejo area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Mission Viejo
Most Mission Viejo repair calls are scheduled within 24 to 48 hours. We run jobs throughout South Orange County every week, so it’s usually a matter of matching your address to a route we already have in the area. Call (833) 545-6817 and we’ll give you a specific window.
Most gate replacements don’t need a city permit if the gate is the same size and sits in the same footprint. The bigger factor in Mission Viejo is HOA architectural approval for visible replacement gates, which is why we spec new gates to match the original design and color where that’s required.
Yes. We repair and install manual gates and electric/automated gate systems, so a single call covers the full range of what’s on your property. If your gate is manual now and you want automation later, we can plan the post and cable provisions at the installation stage so the upgrade is straightforward.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Mission Viejo Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Colleen Rhodes"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Adam Sutton"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Norma Reyes