Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Highland, CA
Gate installation in Highland follows a pattern we see across the 92346 corridor: older ranch-era properties with tired driveway gates, and newer foothill subdivisions where owners want an automatic sliding gate on a long, exposed lot. The sun and wind here do real work on gates. We install and service everything from manual wrought iron driveway gates to fully automated slide gate systems, and because we work exclusively on gates, a Highland installation gets the same attention to hardware, track alignment, and opener programming whether it’s a Mighty Mule swing arm or a full DoorKing slide operator. Call (833) 545-6817 when you’re ready to talk through what your property needs.
Why Highland Homes Are Different
Highland sits in the hot, dry, wind-exposed foothills belt below the San Bernardino Mountains, and that position shapes almost every gate problem we’re called out to fix. The summer sun beats down on west- and south-facing gates for ten or eleven hours a day, which warps wood frames, bakes paint off iron, and dries out hinges until they sag. Santa Ana winds push dust off the hills and open lots into slide-gate tracks and roller assemblies far faster than in the valley-floor cities below. That dust acts like sandpaper on rollers, wheels, and latch mechanisms.
The housing stock tells us what to expect before we arrive. Much of Highland is mid-century and late-20th-century single-family homes on generous lots, many with long driveway gates, side-yard access gates, and block-wall perimeter fencing rather than shared HOA gate systems. Newer foothill subdivisions add modern ornamental iron and automatic slide gates to the mix. The same technician routinely services a weathered wood driveway gate off Baseline one day and a custom iron electric gate in a hillside tract the next. Gates that face the afternoon sun and the foothill wind gap tend to warp or drag within a season, so we plan repairs and installations around hardware that holds up under those specific conditions rather than hardware that works fine in coastal cities.
Styles & brands we work with
Our Main Highland Services
Homeowners and property managers in Highland call us most often for two things: fixing a gate that won’t open, close, or latch properly, and repairing the automation on an electric gate. Both are covered by dedicated Highland pages below.
Gate Repair in Highland
Manual gate repair in Highland runs into a few repeat offenders: sagging hinges on sun-baked wood gates, latches that no longer line up because the post shifted, and slide gates dragging through dust-packed tracks. We repair wrought iron and metal gates as well as wood, which matters in a city where both stock exists side by side. A gate that scrapes the ground or won’t stay latched is a security and usability problem, not a cosmetic one. Gate Repair in Highland covers what to expect, from hinge replacement to full gate re-hanging, and what it typically costs.
Electric Gate Repair in Highland
Highland’s dust and heat are hard on gate openers. Circuit boards overheat, limit switches drift, photocells get coated with fine dust, and worn gears in the operator struggle against gates that have swollen or sagged. We service nine major automation brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so you’re not stuck waiting on a brand-specific dealer. Electric Gate Repair in Highland explains common failure points and repair pricing for automated systems in the 92346 area.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Highland
Gate installation in Highland differs from most cities because of the wind and the sun. A gate installed without accounting for afternoon heat expansion, seasonal Santa Ana gusts, and dust accumulation will sag or bind within a season or two. When we install gates here, we size hardware for the exposure, use concrete footings and post depths that hold under dry, shifting soil, and set gate gaps so a warped or swelling frame still clears. Whether it’s a manual ornamental iron driveway gate on a mid-century lot or a fully automated slide gate on a foothill property, the installation is engineered for Highland’s conditions, not a generic Southern California spec. We handle the entire job from measurement and concrete work through operator wiring and safety-edge installation, and we don’t hand any piece off to a fence company or general contractor. The single point of accountability is something Highland property owners tell us they value, especially when a gate has both structural and automation work involved. For details on the full scope of what we offer, see Gate Installation.
Automatic Gate Installation
Signs you need it
You want your driveway secured with a gate that opens and closes without getting out of the car, and a manual gate no longer fits how the property is used.
What it costs in Highland
Automatic gate installation in Highland typically runs $1,800 to $3,600 for a single swing gate with operator, with dual swing gates at $2,600 to $5,200.
How we do it
We measure the opening and gate weight, mount the operator on reinforced posts and brackets, run the control wiring and safety edges, then program limits and remote controls and test the full cycle under load.
Electric Gate Installation
Signs you need it
Your existing gate is sound, but you want keypad, remote, or intercom access and automated operation added to it.
What it costs in Highland
Adding automation to an existing gate in Highland typically costs $1,400 to $3,200 for a swing operator, with slide gate retrofits running $1,900 to $4,100.
How we do it
We verify the gate’s hinges and weight can handle automation, install the operator, run power and low-voltage wiring, add safety sensors and remotes, and adjust opening speed and force.
What Gate Installation Costs in Highland
| Item | Typical range in Highland |
|---|---|
| Manual single swing gate (steel, standard width) | $1,200 – $2,400 |
| Automatic single swing gate (operator + gate) | $2,800 – $5,500 |
| Automatic slide gate (operator + gate) | $3,400 – $7,000 |
Prices above are for gate, operator, and installation labor. Site work like demo of the old gate, concrete repairs at the post, and long power runs add cost. We quote the full price before any work starts, and that’s the price you pay.
How long does gate installation take in Highland?
Most single-gate installations in Highland take one to two days including concrete curing time for post footings. Automatic slide gates with long power runs can run three to four days.
Do I need a permit for a new gate in Highland?
Highland requires permits for new automatic gate systems and for structural changes to driveway openings. We handle the permit paperwork and inspections as part of the installation so you’re not chasing city hall on your own.
Brands We Service in Highland
Our Highland trucks carry parts for the automation brands you’re most likely to have: LiftMaster, DoorKing, Elite, and Mighty Mule. Because gates are all we do, we stock the boards, remotes, loops, and safety edges for these systems rather than ordering everything in. That keeps repair turnaround faster when a Highland gate fails mid-week. For the full breakdown, see our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Highland, CA
| Service | Typical range in Highland |
|---|---|
| Gate repair (hinges, latches, alignment, posts) | $180 – $700 |
| Warped or sagging gate re-hang | $260 – $780 |
| Slide gate track cleaning and roller replacement | $190 – $510 |
| Electric gate control board replacement | $340 – $1,000 |
| Electric gate operator replacement | $1,000 – $2,800 |
| Safety sensor and photocell repair | $180 – $460 |
| Manual single swing gate installation | $1,200 – $2,400 |
| Automatic single swing gate installation | $2,800 – $5,500 |
| Automatic slide gate installation | $3,400 – $7,000 |
| Operator-only retrofit on existing gate | $1,400 – $3,200 |
What pushes a Highland price past the middle of the range is dust damage in slide tracks, sun-warped frames that need reworking before an operator mounts, and long trench runs for power to a driveway gate set far from the house. Every job gets a written quote before we touch anything, and the quoted price doesn’t move.
Neighborhoods We Serve in Highland
We cover all of Highland’s 92346 ZIP code. The work takes us from the older ranch-property streets near Baseline and Victoria into the newer foothill tracts up toward the mountain edge, plus the East Highlands area and the lots around Greenspot Road.
- East Highlands
- The foothill subdivisions along Greenspot Road
- The ranch-property streets off Baseline
- Areas around Highland Avenue and Victoria
- Newer tracts near the 330 corridor
We typically reach any Highland address within one business day for estimates and repairs, and in one trip for emergency gate failures.
Service Area – Cities Near Highland
Wrought Gate Repair serves Highland and the surrounding foothill and valley communities. Beyond the 92346 corridor, we regularly work across San Bernardino, CA, Muscoy, CA, Redlands, CA, and Loma Linda, CA, covering everything from ranch-era swing gates to newer automated slide systems.
Serving Highland, CA — Our Local Coverage Area
We’re based in the Highland area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Highland
Most Highland service calls are reached same-day or next business day. A gate stuck open or one that won’t close is a security issue, so we prioritize those over routine adjustments and get a technician rolling as soon as you call.
Some newer Highland subdivisions and foothill tracts do have architectural guidelines covering gate height, material, and finish. We’ve worked within enough of them to know what gets approved, and we’ll coordinate the design and permit path before installation starts.
Call (833) 545-6817, tell us what the gate is doing or not doing, and we’ll schedule a visit at a time that works. Estimates are free, and we quote a fixed price before any repair or installation work starts.
If your Highland gate won’t latch, won’t open, or you’re ready to put in a new automatic gate, call Wrought Gate Repair at (833) 545-6817. We work exclusively on gates, we know the wind and dust conditions in the 92346 corridor, and we’ll give you a straight price before the first tool comes off the truck.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Highland Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Jasmine Coleman"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— Marisol Flores"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Gilbert Delgado