Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Redlands, CA
Gate installation in Redlands runs between $2,800 and $11,000 for most residential jobs, with automated driveway gates landing on the higher end when actuators, safety edges, and underground power runs are included. Redlands is a city of two gate eras: century-old Craftsman and Spanish-revival homes near the historic core, and 1980s-to-2000s tracts on the east side where steel driveway gates and slide operators dominate. We work exclusively on gates, which means when you call (833) 545-6817, you’re talking to someone who can tell a FAAC actuator from a Mighty Mule swing arm without checking a manual.
Why Redlands Homes Are Different
Redlands sits in a hot, dry Inland Empire corridor where summers routinely push past 100°F, humidity stays low, and Santa Ana winds sweep through the city each fall. That combination does specific things to gates. Wood gates on the older properties south of downtown and along the historic avenues dry-split and warp. Wrought iron and steel gates rust, sun-fade, and rack out of alignment when wind gusts hit them repeatedly. Automatic opener arms get knocked off true, and posts that were set decades ago shift in the dry soil.
The housing stock compounds the challenge. Redlands’ historic core in 92373 is full of 1920s-to-1950s bungalows and Craftsman homes that still carry original wood picket and wrought-iron drive gates. Those gates need restoration work, not patch jobs. The east side in 92374 and 92375 is different: mid-century bungalows and 1980s-to-2000s tract homes with steel driveway gates, sliding gates, and electric operators that are now reaching the end of their service life. A gate specialist has to be comfortable repairing a redwood gate from the Roosevelt-era one day and diagnosing a failed Linear control board the next. We do both.
One more Redlands factor: mature citrus and shade trees drop leaves, twigs, and fruit into gate tracks and hinges year-round. Add Santa Ana wind events bending gate frames, and you get jammed and sagging gates that are as often a foliage-and-wind problem as a hardware failure. That’s why our Redlands work always starts with clearing the environment around the gate before we touch a single part.
Styles & brands we work with
Our Main Redlands Services
Most Redlands calls start with one of two problems: a gate that won’t close, or a gate that opens but won’t move on its own. Here’s what each looks like here.
Gate Repair in Redlands
Manual gates in Redlands fail differently than automated ones. On the older properties in 92373, we’re usually straightening wrought-iron pickets, re-hanging sagging wood gates, or replacing hinges that have rusted through after decades of dry heat and Santa Ana wind. On east-side tract homes, the work is more often about steel driveway gates that have racked out of square or posts that shifted in the dry soil. We carry a full loadout of hinges, brackets, wheels, and ironwork hardware on every truck, so most repairs finish in one visit. Gate Repair in Redlands is our most-requested service for exactly these reasons.
Electric Gate Repair in Redlands
When a redlands gate stops opening, the cause is usually one of three things: a failed control board, a worn actuator arm, or a safety sensor knocked out of alignment by wind or debris. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, which covers nearly every automated gate in Redlands without you having to track down a brand-specific dealer. We diagnose on-site, quote before any work starts, and most control board and limit switch repairs finish same-day. Electric Gate Repair in Redlands covers the full scope of what we fix on automated systems.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Redlands
Gate installation in Redlands typically means one of two projects: replacing a worn-out manual gate on an older home, or adding a fully automated driveway gate on a newer east-side property. The Redlands climate shapes both jobs. Wood gates need kiln-dried stock and sun-resistant finishes to survive 100°F summers without splitting, while steel and iron gates need proper priming and fabrication that won’t warp when Santa Ana winds hit them year after year. We handle the full installation, from post setting and gate fabrication through operator mounting, power runs, and safety edges. Every project gets a written quote before work begins, and we don’t start cutting until you’ve approved the number. For the full scope of what we build, see Gate Installation.
Automatic Gate Installation
Signs you need it
You’re done opening and closing your driveway gate by hand, or your current operator is dead and the gate itself is too worn to justify another repair.
What it costs in Redlands
Automatic gate installation in Redlands typically runs $3,200 to $11,000 depending on gate size, operator type, and whether we’re running power from the house or adding an underground loop.
How we do it
We set or verify the posts, hang the gate, mount the operator, run the power and control wiring, install safety edges and photo eyes, and program the remotes and keypad before we leave.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is sagging past the point of repair, or you’ve never had one and want a secure, proper entrance that matches the era of the home.
What it costs in Redlands
Driveway gate installation in Redlands typically ranges from $2,800 for a simple single-swing steel gate to $7,500 or more for a custom wrought-iron double gate with hardware and finish work.
How we do it
We measure the opening, fabricate or order the gate to spec, set the posts in concrete, hang and align the gate, and finish with hardware adjusted for the specific wind load at your property.
Sliding Gate Installation
Signs you need it
Your driveway slopes or the opening is too wide for a swing gate, or you need a gate that won’t block cars when it opens.
What it costs in Redlands
Sliding gate installation in Redlands typically runs $3,800 to $9,500 depending on the track system, gate length, and whether an operator is included.
How we do it
We set the track and post brackets, assemble the gate frame, mount the rollers and operator if specified, and align the final gate so it rolls clean even when Redlands leaves and twigs collect in the track.
What Gate Installation Costs in Redlands
| Item | Typical range in Redlands |
|---|---|
| Manual driveway gate (single swing, steel or iron) | $2,800 – $6,500 |
| Automatic gate installation (operator, safety, basic power run) | $3,200 – $11,000 |
| Sliding gate with track and hardware | $3,800 – $9,500 |
How long does gate installation take in Redlands?
Most Redlands gate installations finish in one to two days on-site, plus a short lead time for fabrication or ordering if the gate is custom. Automated systems may take a second visit for final programming and safety testing.
Do you handle the power run for an automatic gate in Redlands?
Yes, we run the low-voltage and line-voltage power, mount the operator, install safety edges and photo eyes, and handle the final wiring to the control board. We quote the power run as part of the installation before any work starts.
Brands We Service in Redlands
We service nine gate automation brands, including FAAC, BFT, Linear, and Viking, plus LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. Our trucks carry common control boards, actuators, and safety sensors, which keeps most Redlands repairs to a single visit. See our brands for the full lineup.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Redlands, CA
| Service | Typical range in Redlands |
|---|---|
| Gate repair (manual, hinge/sag/alignment) | $180 – $640 |
| Electric gate repair (control board, actuator, sensor) | $240 – $850 |
| Manual driveway gate installation | $2,800 – $6,500 |
| Automatic gate installation | $3,200 – $11,000 |
| Sliding gate installation | $3,800 – $9,500 |
What pushes a Redlands gate job toward the top of these ranges is usually wind exposure and tree debris. Properties along Santa Ana wind corridors need heavier posts, stronger hinges, and more frequent alignment work, while gates under mature orange or shade trees collect enough leaves and fruit to wear rollers and tracks faster than a clean, open lot. Whatever the number, we quote it before we start, and that’s the number you pay unless we find something structural and get your sign-off on a change.
Neighborhoods We Serve in Redlands
We work across all three Redlands ZIP codes and typically reach most neighborhoods same-day or next-day for repair calls. Installations are scheduled and measured first, with a written quote before any fabrication begins.
- Historic downtown core (92373)
- South Redlands near the avenues
- East Redlands tracts (92374)
- Sunset Drive area
- North Redlands and the 92375 corridor
Service Area – Cities Near Redlands
Wrought Gate Repair serves Redlands and the surrounding Inland Empire communities. If you’re in Mentone, CA or up toward Highland, CA, we cover those areas regularly. We also work in Loma Linda, CA and over in Colton, CA. Call (833) 545-6817 and we’ll confirm coverage and a time window.
Serving Redlands, CA — Our Local Coverage Area
We’re based in the Redlands area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Redlands
Redlands requires permits for most new gate installations, particularly automated driveway gates, and we handle the paperwork and inspections as part of the job. We’ll tell you during the estimate whether your specific project needs one, and we won’t start construction until the permit is in hand.
For security-critical failures like a gate that won’t close or an operator that’s stuck open, we can usually reach most Redlands properties same-day or next morning. Repair jobs are prioritized by urgency, and we’ll give you a straight time window when you call (833) 545-6817.
Yes, we regularly work with Redlands HOAs and commercial property managers on shared entry gates, automated driveway gates, and access-controlled vehicle gates. We quote the job, handle any HOA documentation you need, and work around your community’s hours for common-area gates.
Call Wrought Gate Repair at (833) 545-6817 for a free estimate on any gate installation, repair, or automation job in Redlands. We work exclusively on gates, and we quote every price before the work starts.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Redlands Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Colleen Rhodes"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Adam Sutton"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Norma Reyes