Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Mentone
Electric gate repair in Mentone typically runs $180 – $640 depending on whether we’re replacing a control board, re-setting a heaved hinge post, or swapping a burned-out gate motor. Most Mentone calls we handle are for long rural driveway gates on unincorporated lots, not the tight HOA pedestrian gates you see in Redlands or Highland. We’re Wrought Gate Repair, and gates are the only thing we work on. If your swing gate is dragging, your keypad won’t respond, or your operator runs but the gate won’t move, call (833) 545-6817 and we’ll get a technician out to your property.
Why Wrought Gate Repair Is Mentone’s Preferred Electric Gate Repair Company
We work exclusively on gates. That’s not a tagline, it’s the entire business. Every truck we send to Mentone carries gate operators, photocells, loop detectors, hinge plates, and control boards, not a mixed bag of fencing tools and garage door parts. Ruben Castellano set the company up that way on purpose. When a homeowner off Crafton Avenue or a property manager on a county-maintained road calls us, the technician who shows up fixes gates all day, every day.
Mentone’s gate stock is different from what we see in neighboring tract cities. A lot of these driveways run 100 feet or more up a slope, with custom-welded steel gates that were built on-site thirty years ago. The posts settle. The wind racks the leaf. The operator that worked for a decade suddenly can’t push the gate through its arc anymore. We’ve repaired enough of these to know what we’re walking into before we even pull up the driveway. That’s the kind of local knowledge you can’t fake with a generic service call.
Our response time to Mentone is same-day or next-day for repair calls, and we quote the job before any work starts. No surprises on the invoice. If you’re managing a gated property or just need your own driveway gate working again, one call covers it: (833) 545-6817.
Styles & brands we work with
Automatic Gate Repair in Mentone
Automatic gate repair in Mentone often starts with a question most city properties never have to ask: is this gate even required to meet current code? Because Mentone is unincorporated San Bernardino County, many rural gates were owner-built and never went through a plan check. That means the gate operator might be wired without proper UL 325 entrapment protection, or the photocells might be damaged, missing, or bypassed. We check that first, before any repair quote, because it changes what the right fix actually is. A typical automatic gate repair in Mentone runs $220 – $480, with control board replacement or safety sensor rewiring at the upper end.
UL 325 Compliance Checks
Before we touch a damaged operator, we verify the entrapment protection is functional. That means the photocells, the reversing edge, and the force settings. On owner-built gates, we frequently find the sensors were never installed or got knocked out of alignment when a post shifted. We repair the gate, then we bring the safety system back to where it should be.
Seasonal Dragging and Door Alignment
Late winter in Mentone brings saturated soil. Sloped lots off the washes hold water, posts heave, and a swing gate that cleared fine in June starts scraping in February. We re-set posts, correct sag, and re-align the operator so the gate cycles cleanly. This is the most common automatic gate repair we do in Mentone, and it’s rarely the motor’s fault.
Electric Gate Motor in Mentone
Electric gate motor repair in Mentone usually means one of three things: the motor burned out from years of pushing a heavy custom gate, the capacitor failed, or the limit switches are out of adjustment and the gate stops halfway. A replacement gate motor for a Mentone driveway gate typically runs $350 – $640 installed, depending on the operator model and whether we’re working with FAAC, BFT, Linear, or Viking hardware. We stock common motor parts locally and can get most brand-specific units within a day or two.
Motor Replacement vs. Repair
On older operators, we’ll tell you honestly if a rebuilt motor is a waste of money. When the wind has been racking a long gate run for years, the motor wears harder than it should. Sometimes the fix is a new motor and a better-braced gate, not just a patch job. We quote both options and let you decide.
Operator Tune-Up and Limit Adjustment
If your motor runs but the gate won’t close fully, the limit cams are often the culprit. Dust, heat, and a few hard Santa Ana wind seasons throw them off. We adjust the limits, test the force settings against the gate’s actual weight, and replace the capacitor if the motor hums but doesn’t turn.
Trusted Brands We Service in Mentone
We service nine gate automation brands, including FAAC, BFT, Linear, and Viking. That matters in Mentone because so many of these systems were installed piecemeal over the years. You might have a FAAC hydraulic operator on one gate and a Linear swing arm on the other. We’re set up to diagnose and repair both without bouncing you to a brand-specific dealer. For Mentone customers, we keep common parts in stock and can usually turn around a repair in one visit, not three weeks of waiting on a distributor.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Mentone Homes
- Hinge post heave from winter runoff: Saturated soil on sloped lots pushes posts up and out of alignment, so swing gates drag seasonally even when the operator and rack and pinion are perfectly fine. We re-set the footing and correct the gate’s sag before re-tuning the operator.
- Santa Ana wind damage on long runs: Wind exposure racks long rural gate runs and misaligns slide gate tracks. Misaligned tracks wear out operator components prematurely, so the fix is often track straightening plus a motor tune-up, not just one or the other.
- Missing or failed entrapment protection: Owner-built and custom-welded gates in Mentone frequently lack proper UL 325 safety photocells or edge sensors. If the sensors are missing, we install them. If they’re there but malfunctioning, we replace them before re-energizing the gate.
- Corroded loop detector connections: Wet-season moisture gets into buried conduit and corrodes the splices on loop detectors, which makes keypad entry intermittent and causes gates to sit half-open. We trace the wiring, re-splice with sealed connections, and test the loop’s sensitivity.
Pricing for Electric Gate Repair in Mentone, CA
Here’s what we charge in the 92359 area. A service call and diagnostic runs $85 – $125, which is credited toward the repair if you proceed. Control board replacement lands at $240 – $520 depending on the brand. Gate motor replacement for FAAC, BFT, Linear, or Viking operators typically runs $350 – $640. Safety photocell replacement is $95 – $180 per pair. Hinge post re-set and sag correction on a heavy custom gate runs $400 – $900 depending on how deep the footing needs to go. Every job is quoted and agreed before we start. If you’re inside Mentone proper or out on the county roads, call (833) 545-6817 for a free estimate. We’ll come out, look at the gate, and give you a written price.
We Also Serve Cities Near Mentone
While we spend a lot of time on rural Mentone driveways, we take care of gate systems throughout the pass. Our Electric Gate Repair team covers Redlands, Yucaipa, Highland, and Calimesa too, with the same gate-only focus we bring to every Mentone job. If your property is in one of these neighboring communities, Mentone is just one stop on our regular route.
Serving Mentone, CA — Our Local Coverage Area
We’re based in the Mentone area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Mentone
For most Mentone properties, no. Mentone is unincorporated San Bernardino County, and many gated communities here answer to county building codes rather than a city HOA. Repairs that don’t change the gate’s footprint rarely need any approval. A full replacement with a different style, height, or finish could trigger a county review, especially if you’re changing the gate’s structural posts. We can walk you through what’s required for your specific property. Call (833) 545-6817 and we’ll help you sort it out.
Because the soil under your hinge post is swelling from winter rain and runoff. Mentone sits in the foothills below the San Bernardino Mountains, and the unincorporated lots off the washes hold moisture longer than flat, developed ground in Redlands. The post heaves upward, the gate leaf drops, and it starts scraping. The gate operator and motor are usually fine. The fix is re-setting the post footing and correcting the gate’s sag. We do this repair every season in Mentone.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers nearly every operator we run into on Mentone properties, from hydraulic FAAC units on custom steel gates to Mighty Mule swing arms on ranch entries. If you’re not sure what brand you have, call (833) 545-6817 and we’ll identify it when we arrive.
Look for two things: photocells mounted near the gate’s travel path on both sides, and a reversing mechanism that stops the gate if it hits an obstruction. If you don’t see photocells, or the gate doesn’t reverse when you block it by hand, you probably don’t have the UL 325 entrapment protection that’s required for automatic gates. That’s common on owner-built Mentone gates. We inspect this on every repair and will bring your gate up to standard before we finish.
Yes. For the gated communities that do exist in Mentone, we work directly with the HOA management company on shared entry systems, resident access, and gate operator repairs. We’ll handle the diagnosis, the repair, and the documentation the board needs. You won’t have to relay messages between us and the property manager. Call (833) 545-6817 and we’ll start the conversation.
Written by Ruben Castellano, Owner at Wrought Gate Repair, serving Mentone and the surrounding foothill communities.