Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Mentone, CA | Wrought Gate Repair
Ghost Controls gate repair in Mentone, CA means diagnosing the specific ways these operators fail on rural foothill properties, and we handle it every week. We’re an independent gate repair company, not a factory-authorized dealer, and we service the AXS, Tube, and Titan lines across Mentone and the surrounding unincorporated areas. What makes our work different here is simple: we know the seasonal post-heave pattern that kills swing gate limits after a wet winter. Call us at (833) 545-6817 for service across Mentone’s long driveway and ranch gates.
Why Mentone Residents Choose Us for Ghost Controls Service
We work exclusively on gates. That’s the whole job. When you call Wrought Gate Repair about a Ghost Controls operator in Mentone, you’re not getting a fencing contractor who also “does gates” or a handyman guessing at a control board. Ruben Castellano, our owner, learned the electrical and mechanical side of automated gate systems through the Industrial Technology program at Chaffey College and has spent over a decade turning that foundation into hands-on Ghost Controls work across the Inland Empire, including Ghost Controls in Yucaipa. If your gate isn’t opening the way it should, there’s a reason, and guessing at it isn’t a repair strategy.
We carry Ghost Controls sales & service knowledge that covers the full product range, from AXS swing arms to Tube and Titan solar kits. On a Mentone gate, we’re looking at the operator, the hinge post, the wire run, the receiver, and the battery as one system. That’s the only way to find why a gate that worked in August is dragging in February. We use OEM boards, arms, and receivers on current units, and proven aftermarket batteries and panels on legacy kits. One call covers it, and we quote the price before any work starts.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in Mentone
- Low-voltage faults and dead batteries on Tube and Titan solar kits. Mentone’s rural lots mean long wire runs, often undersized by a previous owner, and solar panels that end up shaded by foothill oaks by mid-afternoon. The gate dies mid-cycle, and the control board logs a low-voltage fault. We trace the wire, test the panel output, and size the battery correctly.
- Limit and sensitivity faults on AXS swing arms when a heavy steel gate racks out of plumb. A wet winter on a sloped Mentone lot softens the soil, the post moves, and the gate starts binding before the arm reaches its travel limit. The opener thinks it’s hit an obstruction. We re-plumb the post, re-hang the gate, and re-teach the limits.
- Receiver and board corrosion from Santa Ana dust and summer sun exposure. Control boxes mounted low on Mentone fence lines take a beating. Remotes and keypads stop pairing. The receiver is usually the failure, not the remote. We replace the board or receiver and seal the box properly.
- Gear and clutch wear on older Titan units pushing horse-property double gates. A double steel drive gate on a single Titan 12 or 24 is a mismatch we see often on Mentone’s equestrian parcels. The operator was undersized for the load. We’ll tell you honestly whether a repair holds up or a Titan 24 re-fit is the right move.
- Battery backup failure after frost or freeze events. Mentone’s winter nights drop below freezing often enough to kill an aging lead-acid battery. The gate works on AC but won’t open during an outage. We test the battery, replace it when needed, and check the charging circuit so the next freeze doesn’t leave you stuck.
Ghost Controls Service in Mentone: What Local Conditions Mean for Your Equipment
Mentone sits in the hot, dry foothill belt below the San Bernardino Mountains, on unincorporated parcels that shed runoff off the washes. That saturated soil heaves gate posts. A Ghost Controls swing gate that cleared cleanly in August starts dragging and tripping its limits by February, a seasonal pattern tract-built Redlands and Ghost Controls service in Highland rarely see. We plan for it. When we service a Ghost Controls operator in Mentone, we check the post plumb and the gate rack as part of the repair, not as an afterthought. On a horse-zoned parcel off Nice Avenue, we found a Tube 500 kit that had been dead for a week. The arm was binding on a custom-welded steel drive gate whose hinge post had heaved about an inch over the wet season. We reset and re-plumbed the post, re-hung the gate, re-taught the limits, and swapped a corroded receiver so the remotes paired again. That gate has run clean through a full summer since. That’s the difference between fixing the symptom and fixing what Mentone’s ground does to a gate.
Ghost Controls Models & Products We Service in Mentone
We service the full current Ghost Controls lineup: the AXS 1 swing arm, the Tube 500 and Tube 700 dual-gate kits, and the Titan 12 and Titan 24 solar swing operators. We also handle Ghost Controls keypads, remote receivers, and wired and solar accessory configurations. For current units, we install OEM boards, arms, and receivers. For legacy kits that Ghost Controls has discontinued, we use proven aftermarket batteries, solar panels, and hardware that match the original specs. We stock common parts locally so a Mentone repair doesn’t stall waiting on a shipment. If your operator is 15 years old on a settled ranch gate, we’ll tell you straight when replacement is cheaper over two years than another round of repairs.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Mentone
Ghost Controls gate repair in Mentone typically runs between $180 and $340 for most service calls, depending on what we find once we open the control box and test the system. Battery replacement, limit re-teaching, and receiver swaps sit at the lower end. Board replacement, solar panel replacement, or a post re-plumb and gate re-hang push toward the higher end. A full operator replacement on a long rural driveway gate runs higher, and we’ll quote that before any work begins. Factors that drive Mentone pricing specifically are long wire runs that need tracing, post heave that requires re-plumbing, and custom-welded gates that take extra labor to re-hang. We give a free estimate on every job, and the price is agreed before we start. Call (833) 545-6817 for an exact quote for your Mentone gate.
Serving Mentone, CA — Our Local Coverage Area
We’re based in the Mentone area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Mentone
Because Mentone’s sloped, unincorporated lots shed runoff during winter and spring rains, and that saturated soil heaves the hinge posts. Your gate itself didn’t change, but the ground under the post did. The gate binds before the arm reaches its limit, and the control board reads that as an obstruction. We re-plumb the post, re-hang the gate, and re-teach the limits so it clears properly again. Call (833) 545-6817 if your gate is dragging after this winter’s rain.
It can, but only if the panel placement gets real sun and the battery is sized for the duty cycle. We regularly see Mentone solar gates where a foothill oak shades the panel from noon onward, or where a previous owner undersized the wire between the panel and the operator. The gate dies mid-cycle. We test panel output, trace the wire, and replace the battery when it can’t hold a charge. Call (833) 545-6817 for a solar system check.
Usually, yes. The receiver on the control board fails more often than the remotes do, especially on Mentone fence lines where the control box sits in Santa Ana dust and full summer sun. We test the receiver directly before blaming the remotes. If it’s dead, we swap the board or receiver, re-pair your existing remotes and keypad, and seal the box against future dust ingress. Call (833) 545-6817 to get your gate responding again.
We do. Wrought Gate Repair works on nine major gate automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your Mentone property has a Ghost Controls on the driveway and a Viking on the horse paddock, one call covers both. We work on gates exclusively, manual or motorized. Call (833) 545-6817 and tell us what you’ve got.
It depends on the operator and the gate’s weight and condition. A lighter AXS arm or an older Titan unit on a heavy double steel gate is a mismatch we see often on Mentone horse properties. The gear and clutch wear out fast. A properly sized Titan 24 or a dual-gate Tube kit handles most custom-welded Mentone drive gates, but only if the gate itself is plumb and moving freely. We’ll measure the gate and tell you what fits. Call (833) 545-6817 for an assessment on your specific gate.
Service Areas Near Mentone
Wrought Gate Repair serves Mentone and the surrounding Inland Empire communities. If you’re in Mentone service area, call us directly. We also cover Ghost Controls service in Lakeland Village and Ghost Controls service in Canyon Lake. Nearby, we reach Chino, Ontario, and Montclair, including the Los Serranos and Claremont areas. If your gate is anywhere in that radius, one call covers it.
Book Your Ghost Controls Service in Mentone Today
If your Ghost Controls gate is acting up on a Mentone property, call Wrought Gate Repair at (833) 545-6817. We’ll schedule a service call, give you a free estimate, and fix the gate correctly, whether that’s a realignment, a motor repair, or a battery backup swap. Same-day service is available for urgent failures. You’ll know the price before we touch a single part.
Written by Ruben Castellano, Owner at Wrought Gate Repair, serving Mentone and the Inland Empire.