Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Aliso Viejo, CA
Gate installation in Aliso Viejo means working inside a master-planned landscape where nearly every entry point is governed by an HOA. The houses here were built mainly from the late 1980s through the 2000s, mostly Mediterranean and Spanish-style attached or close-set homes with stucco walls and tile roofs. Gates sit at community entries, pool enclosures, and mail kiosks on Aliso Creek Road and Pacific Park Drive, not on long private driveways. Wrought Gate Repair has served Aliso Viejo since 2012, and we work exclusively on gates. If you need a new gate, call (833) 545-6817 for a free estimate.
Why Aliso Viejo Homes Are Different
Aliso Viejo is unusual because almost every residential gate is an association-controlled entry rather than a private front gate. The housing stock is dense, planned, and uniform: 1990s and 2000s stucco construction, tile roofs, and wrought-iron or vinyl gates at community boundaries, pool yards, and cluster mail areas. That means gate work here is not just mechanical. An HOA board determines the style, color, hardware finish, and often the automation spec. A repair or replacement has to match what the association approved, and it has to pass their walkthrough afterward. We have handled that process enough times in the 92656 and 92698 ZIPs to know exactly what gets signed off and what gets flagged.
The climate adds a second layer. Aliso Viejo sits in the coastal-inland band of Orange County: warm dry summers, Santa Ana wind events, and irrigated landscaping that kicks dust into tracks and hinges. Wood and vinyl gates fade under UV, and HOA boards then require repainting before a repair is considered complete. A broken gate here is rarely just one thing. It is a hinge that binds from grit, a track that needs cleaning, and a finish that has to match the association’s palette.
Styles & brands we work with





Our Main Aliso Viejo Services
These are the two calls we answer most often from Aliso Viejo homeowners and property managers. Each has a dedicated page below.
Gate Repair in Aliso Viejo
A sagging wrought-iron gate at a community pool entrance or a torn hinge on a vinyl mail kiosk is a liability, not just a nuisance. Gate repair in Aliso Viejo usually means matching the association’s hardware and finish while fixing the mechanical fault: bearings, weld points, post alignment, latch geometry. The dry, dusty conditions off Aliso Creek Road accelerate hinge wear, so we check every pivot, not just the one that failed. See the full scope at Gate Repair in Aliso Viejo.

Electric Gate Repair in Aliso Viejo
Automated gates at gated enclaves and pool entries run on access control: keypad, sensor, controller, actuator. When the gate stops responding, the fault is usually in the electronics or a safety sensor, not the hinge. Electric gate repair in Aliso Viejo means diagnosing the board or motor first, then logging the repair for the association’s managed-access records. We service FAAC, BFT, Linear, and Viking systems across the 92656 and 92698 ZIPs. Full details at Electric Gate Repair in Aliso Viejo.

What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Aliso Viejo

New gate installation in Aliso Viejo almost always runs through an HOA approval step, and the gate has to match the approved style, paint code, and hardware spec before the first post hole is cut. Most properties here date from the 1990s and 2000s, with stucco walls and Mediterranean or Spanish detailing, so the default request is a wrought-iron or powder-coated steel gate that matches the community’s existing entries. The dry summers and Santa Ana winds mean we anchor posts deeper and use sealed bearings from day one, because dust and grit will find any shortcut within a season. For the full installation scope, see Gate Installation.
Automatic Gate Installation
Signs you need it
Your gate is manually operated but the community already has access control at other entries, or the board has flagged your current gate for non-compliance with managed-access standards.
What it costs in Aliso Viejo
Automatic gate installation in Aliso Viejo typically runs $2,700-$8,600 depending on the operator, access control, and whether a new operator arm is required.
How we do it
We set the gate and operator, wire the access control and safety edges, then program and test the full open-close-safety cycle to the association’s managed-access standard.
Driveway Gate Installation
Signs you need it
The existing driveway gate is corroded or sagging past repair, or the property has no gate and the HOA requires one for the streetscape.
What it costs in Aliso Viejo
A new driveway gate in Aliso Viejo generally lands between $1,200 and $5,100 for the gate and installation, before automation if you choose it.
How we do it
We measure the opening, confirm HOA approval on style and color, set and anchor the posts, hang the gate, and adjust the hinges and latch for a clean, level swing.
Electric Gate Installation
Signs you need it
You are adding keypad or vehicle-sensor access to an existing gate, or the board is requiring motorized operation for a community entrance.
What it costs in Aliso Viejo
Electric gate installation in Aliso Viejo typically costs $2,800-$12,400 depending on the operator, panel, control hub, safety sensors, and whether a trench and power run are needed.
How we do it
We install the operator and arm, pull power to the gate location per code, wire safety edges and keypads, then program and test the full cycle.
Sliding Gate Installation
Signs you need it
The entry is too tight or too sloped for a swing gate, or the existing sliding gate has a cracked concrete track and a worn roller truck.
What it costs in Aliso Viejo
Sliding gate installation in Aliso Viejo typically runs $2,800-$7,700, with the final figure driven by gate length, track condition, and whether automation is included.
How we do it
We set the track and roller system, hang and balance the gate, wire the motor and limits if automated, and verify the gate rides cleanly through its full travel.
What Gate Installation Costs in Aliso Viejo
| Item | Typical range in Aliso Viejo |
|---|---|
| Driveway gate, single swing, manual | $1,200 – $5,100 |
| Automatic gate installation | $2,700 – $8,600 |
| Electric gate installation | $2,800 – $12,400 |
| Sliding gate installation | $2,800 – $7,700 |
What does HOA approval do to my installation timeline in Aliso Viejo?
Most Aliso Viejo HOAs review gate changes at a monthly or twice-monthly board meeting. That review usually adds two to six weeks before we can start. We prepare the spec sheet and color samples in the format boards expect, which speeds up approval.
Do you handle the power run and safety edges yourself?
Yes. We run the power to the gate location, install the safety edges and photo eyes, and tie everything to the access control. You are not coordinating a separate electrician. Call (833) 545-6817 for a written quote.
Brands We Service in Aliso Viejo
We service FAAC, BFT, Linear, and Viking automation across Aliso Viejo, and we keep common operator parts and control boards on the truck so most repairs do not wait on a shipment. If we have to order a part, we tell you the lead time before we start. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Aliso Viejo, CA
| Service | Typical range in Aliso Viejo |
|---|---|
| Automatic gate installation | $2,700 – $8,600 |
| Gate installation (driveway, manual) | $1,200 – $5,100 |
| Electric gate installation | $2,800 – $12,400 |
| Sliding gate installation | $2,800 – $7,700 |
Prices in Aliso Viejo move with three things: HOA finish requirements, gate length at community entries, and whether the existing track or post footing is still sound. Whatever the scope, the price is quoted and agreed before any work starts.
Neighborhoods We Serve in Aliso Viejo
We work throughout Aliso Viejo’s planned communities, from the gated enclaves off Aliso Creek Road to the cluster-mail and pool-gate areas near Pacific Park Drive. Most appointments in the area run inside the same day or next morning, depending on part availability.
- Glenwood
- Westridge
- Aliso Viejo Country Club area
- Pacific Ridge enclaves
Service Area – Cities Near Aliso Viejo
Wrought Gate Repair covers Aliso Viejo and the surrounding Orange County communities. We regularly work in Laguna Hills, CA, Laguna Woods, CA, San Joaquin Hills, CA, and Irvine, CA. If your gate sits in one of these nearby cities, call (833) 545-6817 and we will confirm the service area.
Serving Aliso Viejo, CA — Our Local Coverage Area
We’re based in the Aliso Viejo area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Aliso Viejo
We schedule most Aliso Viejo appointments same day or next morning. Emergency gate failures at HOA entries get moved up first, since a downed community gate blocks residents. Call (833) 545-6817 and we will give you a window.
For any community entry, pool gate, or mail kiosk, yes. The board must approve the style, color, and hardware before we begin. For gates entirely inside a private driveway, the HOA may still want a match. We provide the spec sheet boards expect.
Most gate repairs do not need a permit. New installations with a new power run or gate operator can require one depending on the location and scope. We pull the permit when it is required and handle the inspection.
If your gate is sagging, stuck, or failing its HOA walkthrough, call Wrought Gate Repair at (833) 545-6817. We work exclusively on gates, we know the Aliso Viejo HOA process, and we quote the price before any work begins.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Aliso Viejo Customers Say
"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Gilbert Delgado"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Carlos Salazar"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Colleen Rhodes