Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Irvine, CA
Gate installation in Irvine runs $3,800 to $14,000 for a complete automated driveway gate, depending on material, opener brand, and whether you’re replacing an existing system or starting fresh. The work here is shaped by Irvine’s master-planned villages, where most gates sit at community entries or on HOA-governed properties built from the 1960s onward, and where summer heat, Santa Ana winds, and winter rain all take their toll on metal and wood alike. Wrought Gate Repair has served Irvine since 2012, and we work exclusively on gates. Call (833) 545-6817 for a free estimate on any gate project in the 92617, 92618, 92619, or 92620 ZIP codes.
Why Irvine Homes Are Different
Irvine’s semi-arid climate means intense July and August sun that bakes gate finishes, dries out wooden panels, and stresses the capacitors and belts inside automatic openers. When Santa Ana winds push through in fall, they load lateral pressure onto tall driveway gates and can knock misaligned sensors out of tolerance. Winter rains, though brief, are enough to start rust at weld points on older wrought iron and make wooden gates swell against their frames. The housing stock compounds this: most of Irvine’s gates were installed as part of tract-home and townhome developments from the late 1960s through the 1990s, so we regularly see operators and access panels that are 20 to 40 years old, wired to panels that no longer have direct manufacturer support.
The big difference in Irvine is HOA and city coordination. Village entry gates in communities like Woodbridge, Northwood, and University Park often share infrastructure, and many must comply with city-mandated emergency access standards and HOA design guidelines. A repair that works in a standalone home in Tustin or Santa Ana can require a color-approved finish, a matched operator panel, or a specific cycle rating when it’s at an Irvine village entry. That’s not a complication we work around; it’s the part of the job we’re set up for. We carry parts from brands like DoorKing and Elite specifically because they’re the operators most commonly spec’d into Irvine’s older HOA systems.
Styles & brands we work with
Our Main Irvine Services
Two calls account for most of what we do in Irvine: restoring gates that have failed from age, accidents, or weather, and repairing the electric operators and control systems that run them. Each has its own page with detailed pricing and signs to watch for.
Gate Repair in Irvine
Manual gate repair in Irvine covers the structural and mechanical side: sagging welded corners, broken hinges, rusted-through bottom rails, misaligned posts, and latches that no longer catch. On Irvine’s older wrought iron gates, corrosion from winter rain and coastal moisture works into weld points and hinge barrels slowly, then fails suddenly when a Santa Ana gust loads the gate sideways. We straighten, reinforce, re-weld, and re-hang rather than patching over the symptom. If the gate itself is beyond saving, we’ll tell you that plainly and walk you through replacement options. For full details on manual gate repair in Irvine, see our Gate Repair in Irvine page.
Electric Gate Repair in Irvine
When an automated gate stops mid-travel, won’t respond to a remote, or starts reversing on its own, the problem is almost always in the operator, the safety sensors, the control board, or the power run feeding them. In Irvine’s HOA-governed villages, we also see access-control failures where a keypad, intercom, or vehicle loop stops talking to the main board. We service LiftMaster, DoorKing, Elite, Mighty Mule, and five other major brands, which means we can usually diagnose the same day and repair without waiting on a brand-specific dealer. For symptoms, costs, and same-day availability, see our Electric Gate Repair in Irvine page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Irvine
New gate installation in Irvine typically means replacing a failed gate or an obsolete operator with a system matched to the property’s architecture and the HOA’s design requirements. Many of the gates we install are replacing units originally built in the 1980s and 1990s, when Irvine’s tract-home villages were going up and automated entry gates became standard on larger lots and private streets. The Irvine twist is that installation often involves matching an existing finish, coordinating with a property manager, or working around service schedules for community entries that can’t be closed for long. That’s the work we do every week. For a full overview of our installation scope, see Gate Installation.
Driveway Gate Installation
Signs you need it
Your existing driveway gate has rusted through at the bottom rail, the posts are leaning from repeated contact with vehicles, or the gate binds so badly the opener burns out every two years.
What it costs in Irvine
Complete driveway gate installation in Irvine, including posts, new gate, and installation labor, runs $1,800 to $3,900 depending on material and width.
How we do it
We remove the old gate and hardware, set new posts in concrete, fabricate or order the new gate to spec, hang it on new hinges, and adjust swing or slide until it moves cleanly by hand.
Sliding Gate Installation
Signs you need it
Your property needs a gate that slides along a fence line instead of swinging into the driveway, because the driveway slopes, the setback is tight, or vehicles park close to the gate path.
What it costs in Irvine
A sliding gate installation in Irvine runs $3,000 to $5,800 for the gate, track or cantilever system, and full installation labor.
How we do it
We measure the opening and slope, build the track or cantilever support, set the gate in place, install the roller system, and test it through full open and close cycles with the operator connected.
What Gate Installation Costs in Irvine
| Item | Typical range in Irvine |
|---|---|
| Driveway gate installation (gate, posts, labor) | $1,800 – $3,900 |
| Sliding gate installation (gate, track, labor) | $3,000 – $5,800 |
| Automatic operator installation (motor, arms, wiring, labor) | $900 – $6,500 |
How long does gate installation take in Irvine?
Most residential gate installations in Irvine take one to three days on site. Custom welded gates and sliding cantilever systems may add a week for fabrication or HOA approval before we schedule the install, so plan for that lead time.
Do you handle HOA approvals for gate installation in Irvine?
We handle the technical side: specs, materials, finishes, and drawings your HOA needs. You submit the application, but we’ll give you manufacturer spec sheets and dimensions so the review doesn’t stall on missing details. Call (833) 545-6817 to talk through your specific community’s process.
Brands We Service in Irvine
We work on DoorKing, Elite, Mighty Mule, and LiftMaster systems daily in Irvine, and we stock common control boards, remotes, sensors, and arm assemblies locally so most repairs don’t wait on shipping. That covers the majority of what’s installed across Irvine’s older village entries and newer driveway gates. See our brands for the full lineup.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Irvine, CA
| Service | Typical range in Irvine |
|---|---|
| Manual gate repair (sagging, hinge, or latch work) | $120 – $340 |
| Wrought iron restoration (rust treatment and refinish) | $350 – $875 |
| Track or rail replacement | $120 – $340 |
| Sensor, keypad, or remote replacement | $135 – $410 |
| Control board or motor replacement | $200 – $1,200 |
| Electric gate repair (total job, parts and labor) | $160 – $1,500 |
| Driveway gate installation | $1,800 – $3,900 |
| Sliding gate installation | $3,000 – $5,800 |
| Automatic operator installation | $900 – $6,500 |
| New gate and operator (combined) | $3,800 – $14,000 |
In Irvine, two things push the number higher: HOA-driven finish matching on shared entries, and the age of the existing wiring, which often needs a new conduit run when we replace an operator from the 1980s or 1990s. Whatever the scope, your price is quoted and agreed before any work starts, and that’s the number on your invoice.
Neighborhoods We Serve in Irvine
We work across all of Irvine, from the village entries and shared gates in the older master-planned communities to newer private driveway gates in the hills. Most repair calls in the 92617, 92618, 92619, and 92620 ZIP codes get a same-day or next-day visit, and we schedule installation work around HOA access windows when needed.
- University Park
- Woodbridge
- Northwood
- Turtle Rock
- Great Park
Service Area – Cities Near Irvine
Wrought Gate Repair serves Irvine and the surrounding cities across central Orange County. If you’re in Tustin, CA, Aliso Viejo, CA, Santa Ana, CA, or North Tustin, CA, the same gate-only team covers your area, with the same brand coverage and the same upfront pricing.
Serving Irvine, CA — Our Local Coverage Area
We’re based in the Irvine area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Irvine
Most gate repair calls in Irvine get a same-day or next-day visit. We dispatch from Chino and keep Irvine on our regular route, so emergency calls for a gate stuck open or an entry gate that won’t close are usually on site within hours.
For single-family driveway gates inside your property line, usually not, as long as the replacement matches the existing footprint and finish. For village entry gates or shared community infrastructure, yes, and we regularly provide the specs and documentation HOAs request. We’ll tell you which situation you’re in on the first call.
Yes. We repair and replace operators, access panels, and entry gates for HOA-governed communities throughout Irvine, including systems running DoorKing and Elite equipment that’s 20 or more years old. Call (833) 545-6817 with the brand and symptoms, and we’ll tell you what’s involved.
For any gate repair, electric gate work, or new installation in Irvine, call Wrought Gate Repair at (833) 545-6817. We’ll give you a straight answer and a free estimate, and you’ll know the price before we start.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Irvine Customers Say
"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Gilbert Delgado"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Carlos Salazar"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Colleen Rhodes