Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in San Clemente, CA
Gate installation in San Clemente runs $2,800 to $11,000 for most residential jobs, with automatic driveway systems landing between $4,500 and $9,500 depending on the opener brand and gate material. Wrought Gate Repair has served San Clemente since 2012, and we work exclusively on gates, which means the crew you get for an ornamental iron driveway gate in Talega is the same team that diagnoses a salt-corroded hinge on a beach bungalow gate in 92672. Call (833) 545-6817 for a free estimate, quoted and agreed before any work starts.
Why San Clemente Homes Are Different
San Clemente is a coastal town where the marine layer does real work on metal. Gates in 92672 sit close enough to the surf that salt spray and morning fog accelerate rust on wrought iron, steel, and even galvanized hardware far faster than properties five miles inland in San Juan Capistrano. We regularly see hinges and latch boxes in San Clemente’s beach neighborhoods pitted and frozen within a few years of installation, where the same hardware inland would go a decade without complaint. Coastal-grade coatings and regular rust remediation are not optional here, they are the difference between a gate that lasts and one that needs replacement prematurely.
The housing stock compounds the issue. San Clemente mixes mid-century beach bungalows with 1970s and 80s tract homes, plus the large master-planned hillside communities of Talega and Marblehead. Older coastal properties often have aging steel or wood gates that were never specced for salt air. Newer hillside estates lean on heavier ornamental iron and automatic driveway gates, and many of those sit inside HOAs with strict architectural guidelines. A replacement gate that works fine but does not match the community’s approved color and style palette can trigger a compliance notice, so local knowledge of San Clemente’s HOA expectations matters as much as the weld quality.
Styles & brands we work with
Our Main San Clemente Services
Two jobs dominate the calls we get from San Clemente homeowners and property managers: repairing existing gates that the coastal climate has compromised, and repairing the electric openers that move them. Here is what each involves here.
Gate Repair in San Clemente
Manual gate repair in San Clemente is rarely just about a hinge. The salt air in 92672 and 92673 pits iron and steel, loosens weld points, and rots wood gates long before their inland counterparts fail. A typical job involves rust remediation, replacing corroded hinges and latch hardware, and reapplying coastal-grade coatings so the repair actually holds. We also square up gates that have sagged on hillside posts, common on sloped lots where the gate’s weight works against the post over time. Whether it is a mid-century bungalow side gate or a Talega courtyard gate, we diagnose the full gate, not just the visible symptom. See Gate Repair in San Clemente for what a same-week fix looks like.
Electric Gate Repair in San Clemente
Electric gate systems fail differently near the coast. Control boards and limit switches corrode faster in marine air, and Santa Ana wind events inland can knock sensors out of alignment and strain opener arms against a gate that no longer travels true. Our electric gate repair work in San Clemente covers the full system: opener, receiver, safety sensors, and the gate itself. We service nine major automation brands, so whether the opener is a FAAC, a LiftMaster, or a DoorKing, one call covers it. No handoffs to a brand dealer. Read Electric Gate Repair in San Clemente for the full scope.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in San Clemente
Gate installation in San Clemente is as much about what the gate is made from and how it fits the neighborhood as it is about the opening that takes place on install day. Coastal properties need powder-coated or galvanized steel that will not pit in salt air, while HOA communities like Talega and Marblehead often require the gate to match an approved style and color before the work clears compliance. A full Gate Installation here includes measuring the opening, setting or repairing posts, hanging and adjusting the gate, and connecting the opener when the job calls for automation, all quoted before we begin.
Automatic Gate Installation
Signs you need it
You are done getting out of the car to swing a heavy driveway gate open, or the gate is manual now and you want controlled access for a hillside property in Talega or Marblehead.
What it costs in San Clemente
Automatic gate installation in San Clemente typically runs $4,500 to $9,500, with the spread driven by opener brand, gate weight, and whether trenching for power is already in place.
How we do it
We measure the opening and gate weight, set or reinforce posts to handle the opener’s force, mount the opener and safety sensors, run power, and test the full cycle for smooth travel and proper reversing safety.
Driveway Gate Installation
Signs you need it
The existing driveway gate is rusted through at the hinges, sagging past adjustment, or the property has no gate and you want to define the entry with something that matches San Clemente’s Spanish colonial character.
What it costs in San Clemente
A new driveway gate in San Clemente runs $1,800 to $4,500 for a manual steel or aluminum gate, and $4,500 to $9,500 when you add an automatic opener.
How we do it
We measure the drive width, confirm HOA color and style requirements where applicable, fabricate or order the gate in coastal-grade material, then set the posts and hang the gate with adjustable hinges before adjusting the swing and latch.
Sliding Gate Installation
Signs you need it
Your driveway slopes sharply or the setback is too tight for a swing gate to arc open, making a slide gate the only layout that clears the vehicle path.
What it costs in San Clemente
Sliding gate installation in San Clemente typically runs $3,000 to $8,000, with the higher end covering automatic cantilever systems on hillside lots where extra track and support work is required.
How we do it
We set the track or cantilever rollers level on the slope, hang the gate so it travels freely without binding, install the opener and safety edges, and verify the full open-close cycle under load.
What Gate Installation Costs in San Clemente
| Item | Typical range in San Clemente |
|---|---|
| Manual driveway gate (steel or aluminum) | $1,800 – $4,500 |
| Automatic driveway gate with opener | $4,500 – $9,500 |
| Sliding gate installation | $3,000 – $8,000 |
Rust remediation on existing posts, HOA-spec paint matching, and hillside grading all push a San Clemente job toward the upper end. Every price is quoted and agreed before we start.
Does a new gate need HOA approval in San Clemente?
In many Talega and Marblehead communities, yes. HOAs typically require the gate’s material, color, and style to match an approved palette before installation. We keep common San Clemente HOA paint specs on hand and can help you confirm what your community requires before the gate is fabricated.
Can you install a gate that matches San Clemente’s Spanish style?
Yes. We work regularly with wrought iron and steel gates that match Mediterranean and clay-tile architecture, including arched tops, powder-coated finishes in dark iron tones, and hardware that suits the Spanish Village-by-the-Sea aesthetic common in 92672 and 92673.
Brands We Service in San Clemente
Wrought Gate Repair services nine major gate automation brands, including FAAC, BFT, Linear, and Viking systems found throughout San Clemente. We stock common control boards, sensors, and remote receivers locally so the diagnosis does not stall waiting on parts. Most opener repairs are completed in one visit. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in San Clemente, CA
| Service | Typical range in San Clemente |
|---|---|
| Gate repair (labor, minor) | $100 – $275 |
| Gate repair (small parts) | $90 – $325 |
| Hinge replacement | $100 – $225 |
| Gate adjustment | $75 – $225 |
| Manual gate installation | $150 – $1,200 |
| Automatic gate installation | $650 – $2,500 |
| Sensor repair | $90 – $200 |
| Operator replacement | $750 – $1,550 |
| Electric gate opener repair | $125 – $350 |
| Full electric gate installation | $2,800 – $11,000 |
What pushes a San Clemente quote up is salt corrosion, hillside post work, and HOA-mandated finish matching, all of which are common here. Every job is quoted and agreed in writing before any work begins, so the number you approve is the number you pay.
Neighborhoods We Serve in San Clemente
Our San Clemente service area covers the beach zones of 92672 and the inland and hillside communities of 92673 and 92674. We work throughout the city, from the coastal bungalows near the pier to the master-planned neighborhoods up the hill. Typical response for repair calls is same-day or next-day, and installations are scheduled after a free measure and written quote.
- Talega
- Marblehead
- Pier Bowl
- Forster Ranch
- Shorecliffs
Service Area – Cities Near San Clemente
Wrought Gate Repair serves San Clemente and the surrounding South Orange County communities. If you are in Ladera Ranch, CA, Laguna Beach, CA, Laguna Hills, CA, or Coto De Caza, CA, we handle gate repair and installation there as well. San Clemente remains our core coastal service area, but our crews travel the region daily.
Serving San Clemente, CA — Our Local Coverage Area
We’re based in the San Clemente area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in San Clemente
Most repair calls in San Clemente are reached same-day or next-day. Coastal 92672 jobs are often scheduled alongside other beach-zone stops, so we can typically fit an urgent hinge or latch failure into the same week you call.
We help with the gate side of it. For Talega, Marblehead, and other HOA communities, we keep common paint and finish specs on hand and can provide the finish details your HOA office needs. You would confirm the final approval with your association directly.
Yes. We repair manual wrought iron and steel gates just as often as we diagnose electric openers. The coastal conditions affect both, and one company covering the full gate means you are not bounced between a welder and an automation dealer.
Call Wrought Gate Repair at (833) 545-6817 for a free estimate on gate installation, gate repair, or electric gate repair in San Clemente. Your gate, fixed right.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What San Clemente Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Adam Sutton"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Norma Reyes"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Emily Chen